Compaq 245161-B22 Plinth Rack Option Kit Installation Instructions

HP CONFIDENTIAL Writer: Amy L. Laffitte Codename:Ridgeback Part Number: 251374-022 Last Saved On: 8/21/03 10:31 AM

HP Plinth Rack

Option Kit

Installation Instructions

Read instructions completely before beginning

installation procedure.

© 2003 Hewlett-Packard Development Company, L.P.

Hewlett-Packard Company shall not be liable for technical or editorial errors or

omissions contained herein. The information in this document is provided “as is”

without warranty of any kind and is subject to change without notice. The warranties

for HP products are set forth in the express limited warranty statements

accompanying such products. Nothing herein should be construed as constituting an

additional warranty.

HP Plinth Rack Option Kit Installation Instructions

Second Edition (September 2003)

Part Number 251374-022

251374- 022

About this Device

The HP Plinth Rack Option Kit enables you to secure

HP 10000 Series racks to the floor.

Kit Contents

The items and quantities required for installation include:

•

Plinth front and rear assembly pieces (2)

•

Plinth side assembly pieces (2)

•

M8 hex nuts (8)

•

Internal serrated lock washers (8)

•

External serrated lock washers (4)

•

M12 x 25 mm long screws (4)

•

Eyebolts (4)

Tools Required

The following tools are required for installation:

•

M8 hex wrench

•

M13 socket wrench

•

T-30 Torx driver

Rack Considerations

Before beginning these procedures, be sure you follow and

understand these precautions:

WARNING:

To reduce the risk of personal injury or damage to

the equipment be sure that:

•

The leveling feet are removed.

•

The stabilizing feet are removed.

•

The casters are removed.

•

The front and rear doors are closed and locked.