Compaq 245161-B22 Blanking Panels Rack Option Kit Installation Instructions
Compaq 245161-B22 - 10642 42U Rack Shock Pallet Manual
UPC - 720591208066
View all Compaq 245161-B22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 245161-B22 manual content summary:
- Compaq 245161-B22 | Blanking Panels Rack Option Kit Installation Instructions - Page 1
Instructions Read Instructions Completely Before Beginning Installation Procedures About This Device The HP HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - Compaq 245161-B22 | Blanking Panels Rack Option Kit Installation Instructions - Page 2
the blanking panel locks into place. 2. Using a flat-head screwdriver, rotate each blanking panel lock 90 degrees clockwise into the locking position. Installation is complete. HP CONFIDENTIAL File Name: 359228-21.doc Last Saved On: 1/9/04 4:16 PM
HP CONFIDENTIAL
File Name: 359228-21.doc
Last Saved On: 1/9/04 4:16 PM
HP Blanking Panels
Rack Option Kit
Installation Instructions
Read Instructions Completely Before Beginning
Installation Procedures
© Copyright 2004 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical editorial errors or omissions contained herein.
January 2004 (First Edition)
Part Number 359228-021
About This Device
The HP Blanking Panels Rack Option Kit enables you to cover
open areas of the rack to better control airflow.
Installation Checklist
Before installation, refer to the following list to be sure that all
of the listed components were received.
Kit Contents
This kit contains either:
•
10 blanking panels (one size)
-or-
•
4 blanking panels (multi-size)
−
1U blanking panel
−
2U blanking panel
−
4U blanking panel
−
8U blanking panel
Required Tool
You will need a flat-head screwdriver.
WARNING:
To reduce the risk of personal
injury or damage to the equipment, be sure that:
•
The leveling jacks are extended to the floor.
•
The full weight of the rack rests on the leveling
jacks.
•
The stabilizing feet are attached to the rack if it is a
single-rack installation.
•
The racks are coupled together in multiple-rack
installations.
•
Only one component is extended at a time. A rack
may become unstable if more than one component
is extended for any reason.