Brother International SB7500 Users Manual - English
Brother International SB7500 Manual
View all Brother International SB7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International SB7500 manual content summary:
- Brother International SB7500 | Users Manual - English - Page 1
Bobbin work kit Operation Manual - Brother International SB7500 | Users Manual - English - Page 2
for sewing (utility stitches, decorative stitches or free-motion sewing). This kit cannot be used for machine embroidering. CONTENTS ABOUT BOBBIN WORK ...2 INCLUDED ACCESSORIES ...2 PREPARING FOR BOBBIN WORK ...3 Required Materials ...3 Upper Threading ...4 Preparing the Bobbin Thread...4 CREATING - Brother International SB7500 | Users Manual - English - Page 3
with heavy weight thread or ribbon too thick to be fed through the sewing machine needle and sewing on the wrong side of the fabric. Bobbin work is sewn using the special bobbin case (gray) and bobbin cover with tabs included with this kit. Utility stitches Decorative stitches (For models with - Brother International SB7500 | Users Manual - English - Page 4
PREPARING FOR BOBBIN WORK Required Materials - Brother International SB7500 | Users Manual - English - Page 5
- Brother International SB7500 | Users Manual - English - Page 6
Be sure to use the bobbin case (gray) when creating bobbin work. Using any other bobbin case may result in the thread becoming tangled or damage to the machine. • Make sure that the bobbin case is correctly installed. If the bobbin case is incorrectly installed, the thread may become tangled or the - Brother International SB7500 | Users Manual - English - Page 7
- Brother International SB7500 | Users Manual - English - Page 8
p Install the needle plate cover and bobbin cover with tabs. For details on installing the needle plate cover, refer to the machine's Operation Manual. a Needle plate cover b Bobbin cover with tabs Note • Two bobbin covers may be included, depending on the country or region where this kit was - Brother International SB7500 | Users Manual - English - Page 9
trial stitches using same fabric and threads as your project in order to check the sewing results. • The bobbin thread may become tangled due to the type of pattern and thread that are being used. Since this may cause the needle to break, immediately stop sewing if this occurs. Turn off the machine - Brother International SB7500 | Users Manual - English - Page 10
bobbin thread, and then pass them under the presser foot toward the rear of the machine. m While gently holding threads at the rear of the machine, turn the handwheel to feed the needle into the punched hole again, and then lower the presser foot lever. i j Turn on the machine. Select a stitch - Brother International SB7500 | Users Manual - English - Page 11
sew reinforcement/reverse stitches or use a "Thread Cutter" button (if so equipped) at the end of the stitching; otherwise it will be difficult to pull the bobbin thread up to the wrong side of the fabric. In addition the threads may become tangled or the needle may break possibly causing machine - Brother International SB7500 | Users Manual - English - Page 12
instructions for "CREATING BOBBIN WORK" beginning on page 8. • Use the quilting foot provided with your machine. If you do not have a quilting foot, contact your nearest authorized dealer to purchase. For details on using the quilting foot, refer to the Operation Manual provided with your machine - Brother International SB7500 | Users Manual - English - Page 13
Templates for Free-Motion Sewing Note • Bobbin work is sewn with the wrong side of the fabric facing up. For this 20 No.20.pdf a b a b a b a b * These templates have the arrows to show you the sewing direction. Trace the arrows with design when transferring the design to the stabilizer. 12 - Brother International SB7500 | Users Manual - English - Page 14
to sew trial stitches again in order to check the sewing results. Adjusting the Upper Thread Tension We recommend an upper thread tension that is higher than the standard setting. Refer to the machine's Operation Manual for detailed instruction. Note • Turning the screw on the bobbin case (gray - Brother International SB7500 | Users Manual - English - Page 15
TROUBLESHOOTING Several solutions for minor problems are described below. If the problem persists, contact your nearest authorized dealer. - Brother International SB7500 | Users Manual - English - Page 16
English 111-001
Bobbin work kit
Operation Manual