Brother International RJ-3055WB ESC/POS Emulation Command Reference
Brother International RJ-3055WB Manual
 |
View all Brother International RJ-3055WB manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International RJ-3055WB manual content summary:
- Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 1
Software Developer's Manual ESC/POS Emulation Guide RJ-2035B/RJ-2055WB/RJ-3035B/RJ-3055WB Version 1.00 - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 2
The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. © 2020 Brother Industries, Ltd. All rights reserved. Epson ESC/POS is a registered trademark of Seiko Epson Corporation. QR Code is registered trademark of DENSO WAVE - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 3
Important Notices This document provides information for the mobile printer RJ-2035B/2055WB/3035B/3055WB (hereinafter referred to as "RJ Printer") and is available for use only if you agree to the following conditions: Use Conditions This document may be used and duplicated only to the extent - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 4
Table of Contents 1. Introduction 2 2. Printer Setup 3 2.1 Perform Firmware Update 3 2.2 Enter Line Mode 6 2.3 Exit Line Mode 7 3. ESC/POS Emulation Support Commands 8 Appendix: Font Specification 10 - 1 - - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 5
1. Introduction ESC/POS emulation allows RJ Printers to interpret ESC/POS commands. To use this feature, change the printer settings as described in Section 2. - 2 - - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 6
download both the EZP Firmware update kit and the Brother Management Tool (BPM) from your model's Downloads page at support.brother.com. 2.1 Perform Firmware Update The EZP firmware supports the use of ESC/POS commands in the Brother Printer Management Tool (BPM). When you update the EZP firmware - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 7
4. Click Browse to navigate to and select the EZP firmware file (*.NEW), and then click Open. 5. Click Send file. The firmware update starts. - 4 - - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 8
6. Check the Version value to confirm that the firmware has been updated. 7. If the printer successfully updated the firmware, it enters Line Mode and starts a test print. 8. To stop the test print, close the BPM. Otherwise the BPM continues to send ESC/POS print commands to the printer. - 5 - - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 9
2.2 Enter Line Mode When you update the firmware into EZP, the printer enters Line Mode automatically. However, every time you launch the BPM, the printer automatically exits Line Mode and returns to Page Mode. Make sure to set the printer to Line Mode again before using ESC/POS commands. 1. Run the - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 10
2.3 Exit Line Mode Exit Line Mode and return to Page Mode to change print settings (such as print speed or density) using the BPM. • The printer automatically exits Line Mode and returns to Page Mode every time you launch the BPM. • If the BPM is already running in Line Mode, click Printer Function - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 11
3. ESC/POS Emulation Support Commands Function Initialize Print Line Spacing Print Position Page Mode Text Characteristics ESC/POS ESC @ CRLF FF ESC J n ESC d n ESC 2 ESC 3 n HT ESC $ nL nH - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 12
Function Barcode Two-dimensional Barcode Kanji Others ESC/POS ESC R n ESC t n ESC { n GS ! n GS B n GS H n GS f n GS h n GS k m n1 ...nk NUL GS w n GS ( k ESC Z GS ( B FS ! FS & FS FS . FS C FS S FS W ESC = n GS ( H Description Select international character set Select character code set Apply/ - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 13
Appendix: Font Specification The font specifications compatible with RJ Printer ESC/POS Emulation are as follows: Font A (EPL font 3：12 x 20 dots) Built-in Font Fixed Font Font B (EPL font 2：10 x 16 dots) Japanese Font (24 x 32 dots) - 10 - - Brother International RJ-3055WB | ESC/POS Emulation Command Reference - Page 14
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
Software Developer’s Manual
ESC/POS Emulation Guide
RJ
-
2035B/RJ
-
2055WB/RJ
-
3035B/RJ
-
3055WB
Version 1.00