Brother International IntelliFax-2840 Software Users Manual - English
Brother International IntelliFax-2840 Manual
View all Brother International IntelliFax-2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International IntelliFax-2840 manual content summary:
- Brother International IntelliFax-2840 | Software Users Manual - English - Page 1
Software User's Guide Not all models are available in all countries. For FAX users; This documentation is for both MFC and FAX models. Where it says 'MFC' in this User's Guide, please read 'MFC-xxxx' as 'FAX-xxxx'. Version 0 USA - Brother International IntelliFax-2840 | Software Users Manual - English - Page 2
LCD messages of the FAX-2940 are used unless specified. Before using this manual, please be sure to install available drivers and software from the download page for your machine in the Brother Solutions Center (http://solutions.brother.com/). For FAX-2840 users: You can download printer drivers - Brother International IntelliFax-2840 | Software Users Manual - English - Page 3
I Machine operation keys 1 Using the control panel 2 Using the printer keys ...2 Job Cancel...2 Section II Windows® 2 Printing 4 Using the Brother printer driver...4 Printing a document...5 Manual duplex (two-sided) printing...6 Guidelines for printing on both sides of the paper 6 Manual - Brother International IntelliFax-2840 | Software Users Manual - English - Page 4
paper 55 Manual duplex printing ...55 Simultaneous scanning, printing and faxing 56 Choosing page setup options ...56 Choosing printing options ...58 Cover Page...59 Layout ...59 Print Settings ...60 Removing the Printer driver for Macintosh 64 Status Monitor...65 Updating the machine's status - Brother International IntelliFax-2840 | Software Users Manual - English - Page 5
Hiding or showing the window ...65 Quitting the window ...66 Sending a fax...67 Using the Addresses panel...70 7 Scanning (For FAX-2940) 73 Scanning a document using the ICA driver (Mac OS X 10.6.x - 10.7.x) ...73 Choosing your machine from Print & Fax or Print & Scan 75 8 Remote Setup 76 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 6
Section I Machine operation keys I Using the control panel 2 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 7
1 Using the control panel 1 1 Using the printer keys 1 You can access the following features from your machine's control panel. Job Cancel 1 To cancel the current print job, press Stop/Exit. You can clear the data that is left in the machine's memory by pressing Stop/Exit. 2 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 8
Section II Windows® II Printing 4 Scanning (For FAX-2940) 29 Remote Setup 41 Brother PC-FAX Send Software (For FAX-2940) 43 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 9
operating system. Using the Brother printer driver 2 A printer driver is software that translates data from the format used by a PC into the format needed by a particular printer, using a printer command language or page description language. The printer drivers are available from the download page - Brother International IntelliFax-2840 | Software Users Manual - English - Page 10
information about the Paper Tray and Recommended paper, see Basic User's Guide.) 2 a From your application, choose the Print command. If any other printer drivers are installed on your computer, choose Brother FAX-XXXX* as your printer driver from the Print or Print Settings menu in your software - Brother International IntelliFax-2840 | Software Users Manual - English - Page 11
jam, see Basic User's Guide: Error and maintenance messages. If you have a print quality problem, see Basic User's Guide: Improving the print quality. Manual duplex printing 2 The machine prints all the even-numbered pages on one side of the paper first. Then, the printer driver instructs you (with - Brother International IntelliFax-2840 | Software Users Manual - English - Page 12
printing. However, when the machine is copying or receiving a fax on paper, it pauses the computer printing operation, and then 2 continues printing when copying or fax receiving has finished. Note Even if Toner Low or Toner Ended is displayed on the LCD, fax sending and scanning are available - Brother International IntelliFax-2840 | Software Users Manual - English - Page 13
Multiple Page Duplex / Booklet Paper Source Scaling Reverse Print Use Watermark Header-Footer Print Toner Save Mode Administrator Density Adjustment Improve Print Output Skip Blank Page Print Profiles The following pages provide an overview of the printer driver settings. For - Brother International IntelliFax-2840 | Software Users Manual - English - Page 14
Accessing the printer driver settings a (For Windows® XP) Click Start, and then Printers and Faxes. (For Windows Vista®) Click the button, Control Panel, Hardware and Sound, and then Printers. (For Windows® 7) Click the button and then click Devices and Printers. b (For Windows® XP and Windows Vista - Brother International IntelliFax-2840 | Software Users Manual - English - Page 15
Type, Resolution and Print Settings (1). b Choose Multiple Page and Duplex / Booklet (2). c Choose Paper Source (3). d Confirm your current settings in the window (4). e Click OK to apply your chosen settings. To return to the default settings, click Default, then OK. Paper Size 2 From the drop - Brother International IntelliFax-2840 | Software Users Manual - English - Page 16
selected before the next page of the document is printed. Media Type 2 You can use the following types of media in your machine. For the best print quality, select the type of media that you wish to use. Plain Paper Thin Paper Thick Paper Thicker Paper Bond Paper Envelopes Env. Thick - Brother International IntelliFax-2840 | Software Users Manual - English - Page 17
ordinary plain paper (60 to 105 g/m2, 16 to 28 lb) choose Plain Paper. When using heavier weight paper or rough paper choose Thick Paper or Thicker Paper. For bond paper, choose Bond Paper. 2 • When printing on envelopes choose Envelopes. If the toner is not fixed to the envelope correctly when - Brother International IntelliFax-2840 | Software Users Manual - English - Page 18
. • Duplex (Manual) The machine prints all the even-numbered pages first. Then the printer driver will stop and show the instructions required to re-install the paper. When you click OK the odd-numbered pages will be printed. When you choose Duplex (Manual), the Duplex Settings... button becomes - Brother International IntelliFax-2840 | Software Users Manual - English - Page 19
Printing Paper Source 2 You can choose Auto Select, Tray1 or Manual and specify separate trays for printing the first page and for printing from the second page onwards. 2 14 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 20
Printing Advanced tab Change the tab settings by clicking one of the following selections: Scaling (1) Reverse Print (2) Use Watermark (3) Header-Footer Print (4) Toner Save Mode (5) Administrator (6) Other Print Options (7) Scaling You can change the print image scaling. Reverse Print - Brother International IntelliFax-2840 | Software Users Manual - English - Page 21
Printing Use Watermark 2 You can put a logo or text into your document as a watermark. You can choose one of the preset Watermarks, or you can use a bitmap file that you have created. Check Use Watermark and then click the Settings... button. 2 Watermark Settings 2 16 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 22
then choose Use Text or Use Bitmap File in Watermark Style. You can change the additional watermark's size and position on the page by selecting the watermark, and clicking the Settings button. Title Enter a title you like in the field. Text Enter your Watermark Text into the Text box, and then - Brother International IntelliFax-2840 | Software Users Manual - English - Page 23
information. 2 ID Print If you select Login User Name, your PC login user name will be printed. If you select Custom and enter the text in the Custom edit box, the text you entered will be printed. Toner Save Mode 2 You can conserve toner use with this feature. When you set Toner Save Mode to - Brother International IntelliFax-2840 | Software Users Manual - English - Page 24
pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to the thin setting. Note This operation will decrease the temperature of the machine's fusing process. Improve Toner Fixing If you choose this setting, the toner fixing on paper - Brother International IntelliFax-2840 | Software Users Manual - English - Page 25
If Skip Blank Page is checked, the printer driver automatically detects blank pages and excludes them from printing. 2 Note This option does not work when you choose the following options: • Use Watermark • Header-Footer Print • N in 1 or 1 in NxN Pages in Multiple Page • Duplex (Manual) or Booklet - Brother International IntelliFax-2840 | Software Users Manual - English - Page 26
profile view(5) a Choose your profile from the print profile list box. b If you want to display the Print Profiles tab at the front of the window from the next time you print, check Always show Print Profiles tab first. c Click OK to apply your chosen profile. Edit a Profile 2 The Save your - Brother International IntelliFax-2840 | Software Users Manual - English - Page 27
Printing b Enter the desired title in Name. c Choose the print profile you want to overwrite, then click OK. Note 2 You can overwrite the preset print profiles. 22 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 28
dialog box. 2 2 1 2 3 4 5 Brother Solutions Center (1) The Brother Solutions Center (http://solutions.brother.com/) is a Web site offering information about your Brother product including FAQs (Frequently Asked Questions), User's Guides, driver updates and tips for using your machine. 23 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 29
this button. Brother CreativeCenter (3) You can visit our Web site for free and easy online solutions for business and home users by clicking this 2 button. Check Setting (4) You can check the current driver settings. About (5) This will show the list of the printer driver files and version - Brother International IntelliFax-2840 | Software Users Manual - English - Page 30
2 Note To access the Tray Settings tab, see Accessing the printer driver settings uu page 9. 2 You can define the paper size for each paper tray and auto detect the serial number in the Tray Settings tab as follows. (5) (6) (1) (2) (4) (3) Paper Source Setting (1) This feature lists the - Brother International IntelliFax-2840 | Software Users Manual - English - Page 31
No. (5) By clicking Auto Detect (6), the printer driver will query the machine and display its serial number. If it fails to receive the information, the screen will display Auto Detect (6) 2 The Auto Detect function obtains the machine's serial number by initiating communication between the - Brother International IntelliFax-2840 | Software Users Manual - English - Page 32
notification of error messages such as paper empty or paper jam. 2 You can check the device status at anytime by double-clicking the icon in the tasktray or by choosing Status Monitor located in Start/All Programs/Brother/FAX-XXXX on your PC. (Windows® 7) If you have set the Enable Status - Brother International IntelliFax-2840 | Software Users Manual - English - Page 33
Printing A yellow icon indicates a warning. A red icon indicates a printing error has occurred. 2 There are two locations where you can display the Brother Status Monitor on your PC - in the tasktray or on the desktop. 28 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 34
on your operating system. The machine uses a TWAIN compliant driver for scanning documents from your applications. Two scanner drivers are installed. A TWAIN compliant scanner driver (See Scanning a document using the TWAIN driver uu page 35) and a Windows® Imaging Acquisition (WIA) driver (See - Brother International IntelliFax-2840 | Software Users Manual - English - Page 35
Scanning (For FAX-2940) 1 3 2 3 4 5 6 e Choose Document Feeder from the Paper source drop-down list (1). f Choose the picture type (2). g Choose the Page size from the drop-down list (4). h If you need advanced settings, click Adjust the quality of the scanned picture (3). You can choose - Brother International IntelliFax-2840 | Software Users Manual - English - Page 36
located in Start/All Programs/Brother/FAX-XXXX (where XXXX is your model name)/ Scanner Settings/Scanner Utility. Screens on your computer may vary depending on your operating system or the model of your machine. Note (Windows Vista® and Windows® 7) When the User Account Control screen appears, do - Brother International IntelliFax-2840 | Software Users Manual - English - Page 37
Scanning (For FAX-2940) • For users who do not have administrator rights: Enter the administrator password and click OK. 3 32 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 38
2940) Scanning a document using the WIA driver (Windows Photo Gallery and Windows Fax and Scan) Scanning a document into the PC You can use the ADF (automatic document feeder) to scan a whole page. a Load your document. b Open your software application to scan the document. c Do one of the following - Brother International IntelliFax-2840 | Software Users Manual - English - Page 39
Scanning (For FAX-2940) 1 2 3 3 4 5 10 6 7 8 9 11 g Click Scan in the Scan dialog box. The machine starts scanning the document. 34 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 40
Scanning (For FAX-2940) Scanning a document using the TWAIN driver A TWAIN compliant scanner driver is available from the download page for your model on the Brother Solutions Center (http://solutions.brother.com/). TWAIN drivers meet the standard universal protocol for communicating between - Brother International IntelliFax-2840 | Software Users Manual - English - Page 41
FAX-2940) Note After you select a document size, you can adjust the scanning area further by clicking the left mouse button and dragging it. This is required when you want to crop an image when scanning. (See Pre-Scanning to crop a portion you want to scan uu page page 35. b Choose the settings for - Brother International IntelliFax-2840 | Software Users Manual - English - Page 42
FAX window. g In your application window, use the options available to refine the image. Settings setting. The default settings are listed in the table below: Scan (Image Type) Resolution Photo Use for scanning photo images. 300 x 300 dpi Web Use for attaching the scanned image to web pages - Brother International IntelliFax-2840 | Software Users Manual - English - Page 43
Scanning (For FAX-2940) Resolution 3 You can choose a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you can choose. Resolution Black & White/ Gray (Error - Brother International IntelliFax-2840 | Software Users Manual - English - Page 44
(For FAX-2940) Note The Contrast setting is only available when Gray (Error Diffusion) or True Gray is chosen. When scanning photographs or other images for use in a word processor or other graphics application, try different settings for the contrast and resolution to see which setting best - Brother International IntelliFax-2840 | Software Users Manual - English - Page 45
(For FAX-2940) Note • You can see the actual paper size you chose on the screen. 3 • Width: shows the width of scanning area. • Height: shows the height of scanning area. • Data Size: shows the rough data size in Bitmap format. The size will be different for other file formats such as JPEG. • User - Brother International IntelliFax-2840 | Software Users Manual - English - Page 46
you change the settings, you can upload them directly to the machine. Click the Start button, All Programs, Brother, FAX-XXXX and Remote Setup. 4 OK Lets you start uploading data to the machine and exit the Remote Setup application. If an error message is displayed, enter the correct data again - Brother International IntelliFax-2840 | Software Users Manual - English - Page 47
Remote Setup Import Lets you read the settings from a file. Note You can use the Export button to save Quick Dial or all your settings for your machine. 4 42 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 48
sending 5 The Brother PC-FAX feature lets you use your PC to send a document from an application as a standard fax. All you have to do is set up the receiving parties as members or groups in your PC-FAX Address Book or simply enter the destination address or fax number into the user interface. You - Brother International IntelliFax-2840 | Software Users Manual - English - Page 49
Start. Setting up user information 5 Note You can access User Information from the PC-FAX sending dialog box by clicking the (See Sending a file as a PC-FAX uu page 43.) icon. a Click the Start button, All Programs, Brother, FAX-XXXX, PC-FAX Sending, then PC-FAX Setup. The PC-FAX Setup dialog - Brother International IntelliFax-2840 | Software Users Manual - English - Page 50
to the top of your sent faxes, check the Include header box. (See Setting up user information uu page 44.) Setting up a cover page 5 From the PC-FAX sending dialog box, click the icon to access the Brother PC-FAX Cover Page Setup screen. The Brother PC-FAX Cover Page Setup dialog box appears: 45 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 51
Brother PC-FAX Send Software (For FAX-2940) 5 Entering cover page information 5 Note If you are sending a fax to more than one recipient, the recipient information will not be printed on the cover page. To Choose the recipient information you want to add to the cover page. From Choose the sender - Brother International IntelliFax-2840 | Software Users Manual - English - Page 52
Brother PC-FAX Send Software (For FAX-2940) Address Book 5 If Outlook or Outlook Express is installed on your PC, you can choose in the Select Address Book dropdown list which address book to use for PC-FAX sending. There are five types: PC-FAX Address Book, Outlook, Outlook Express (Windows® XP - Brother International IntelliFax-2840 | Software Users Manual - English - Page 53
Address Book 5 a Click the Start button, All Programs, Brother, FAX-XXXX (where XXXX is your model name), PC-FAX Sending, then PC-FAX Address Book. The Address Book dialog box appears: 5 Setting up a member in the Address Book 5 In the Address Book dialog box you can add, edit and delete members - Brother International IntelliFax-2840 | Software Users Manual - English - Page 54
Brother PC-FAX Send Software (For FAX-2940) Setting up a group for broadcasting You can create a group to send the same PC-FAX to several recipients at one time. a In the Address Book dialog box, click the icon to create a Group. The Address Book Group Setup dialog box - Brother International IntelliFax-2840 | Software Users Manual - English - Page 55
Brother PC-FAX Send Software (For FAX-2940) c When the confirmation dialog box appears, click OK. Exporting the can also export the Address Book as Remote Setup Dial Data that can be used by the Remote Setup application of your machine. (See Remote Setup uu page 41.) If you are creating a vCard, - Brother International IntelliFax-2840 | Software Users Manual - English - Page 56
Brother PC-FAX Send Software (For FAX-2940) e Enter the name of the file, and then click Save. 5 Importing to the Address Book 5 You can import ASCII text files (*.csv), vCards (electronic business cards) or Remote Setup Dial Data into your Address Book. Importing an ASCII text file 5 a Do one of - Brother International IntelliFax-2840 | Software Users Manual - English - Page 57
Brother PC-FAX Send Software (For FAX-2940) e Enter the name of the file, and then click Open. 5 Note If you chose Text file in step a, Files of type: will be Text files {*.txt; *.csv}. 52 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 58
Section III Apple Macintosh III Printing and Faxing 54 Scanning (For FAX-2940) 73 Remote Setup 76 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 59
6 Printing and Faxing 6 Features in the printer driver (Macintosh) 6 This machine supports Mac OS X 10.5.8 - 10.6.x - 10.7.x. Note The screens in this section are from Mac OS X 10.5. The screens on your Macintosh will vary depending on your operating system version. 6 54 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 60
may be paper jams or poor print quality. If there is a paper jam, see Basic User's Guide: Error and maintenance messages. If you have a print quality problem, see Basic User's Guide: Improving the print quality. 6 Manual duplex printing 6 The machine prints all the even-numbered pages on one - Brother International IntelliFax-2840 | Software Users Manual - English - Page 61
machine is copying or receiving a fax on paper, it pauses the computer printing operation, and then continues printing when copying or fax receiving has finished. *(FAX-2940 only) Note Even if Toner Low or Toner Ended is displayed on the LCD, fax sending and scanning are available. Choosing page - Brother International IntelliFax-2840 | Software Users Manual - English - Page 62
Printing and Faxing 6 Note You can save the current settings as a preset by choosing Save As from the Presets pop-up menu. (For Mac OS X 10.7.x) For more page setup options, click Show Details. 57 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 63
Printing and Faxing Note You can save the current settings as a preset by choosing Save Current Settings as Preset from the 6 Presets pop-up menu. Choosing printing options 6 To control special printing features, choose the options you want to change from the Print dialog box. 58 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 64
and Faxing Cover Page 6 You can choose the following cover page settings: 6 Print Cover Page If you want to add a cover page to your document, use this function. Cover Page Type Choose a template for the cover page. Billing Info If you want to add the billing information to the cover page - Brother International IntelliFax-2840 | Software Users Manual - English - Page 65
do manual duplex printing, see Duplex Printing uu page 62. Print Settings 6 You can change settings by choosing a setting in the Print Settings list: Media Type You can change the media type to one of the following: • Plain Paper • Thin Paper • Thick Paper • Thicker Paper • Bond Paper • Envelopes - Brother International IntelliFax-2840 | Software Users Manual - English - Page 66
• HQ 1200 Paper Source You can choose Auto Select, Tray 1 or Manual. 6 Advanced print settings When you click the triangle mark (c) beside Advanced, the advanced print settings appear. Toner Save Mode You can conserve toner use with this feature. When you set Toner Save Mode to On, print - Brother International IntelliFax-2840 | Software Users Manual - English - Page 67
pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a thin setting. Note This operation will decrease the temperature of the machine's fusing process. • Improve Toner Fixing 6 If you choose this setting, the toner fixing on paper - Brother International IntelliFax-2840 | Software Users Manual - English - Page 68
Printing and Faxing 6 63 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 69
Printing and Faxing Removing the Printer driver for Macintosh 6 a Log in as an 'Administrator'. b From the Apple menu, choose System Preferences. Click Print & Fax or Print & Scan, then choose the printer you want to remove and remove it by clicking the - button. 6 64 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 70
, letting you see error messages such as paper empty or paper jam at pre-set update intervals. You can check the device status by launching Brother Status Monitor. Follow these steps: For Mac OS X 10.5.8 a Run the System Preferences, select Print & Fax, then choose the machine. b Click the Open - Brother International IntelliFax-2840 | Software Users Manual - English - Page 71
Printing and Faxing Quitting the window 6 Click Brother Status Monitor in the menu bar and then choose Quit Status Monitor from the pop-up menu. 6 66 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 72
application. Note Fax documents will be sent in Black and White only. a Create a document in a Macintosh application. b From an application such as TextEdit, click File, then Print. (Mac OS X 10.5.8 to 10.6.x) For more page setup options, click the disclosure triangle beside the Printer pop-up - Brother International IntelliFax-2840 | Software Users Manual - English - Page 73
Printing and Faxing 6 68 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 74
Printing and Faxing c Choose Send Fax from the pop-up menu. 6 d Choose Facsimile from the Output pop-up menu. e Enter a fax number in the Input Fax Number box, and then click Print to send the fax. 69 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 75
Printing and Faxing Note If you want to send a fax to more than one number, click Add after entering the first fax number. The destination fax numbers will be listed in the dialog box. Using the Addresses panel You can choose a fax number using the Addresses button. 6 6 70 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 76
Printing and Faxing a Click Addresses. 6 b Choose the fax number from the Addresses panel and then click To. 71 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 77
Printing and Faxing c When you have chosen your fax, click Print. 6 72 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 78
. If you installed available drivers and software from the download page for your machine in the Brother Solutions Center (http://solutions.brother.com/), the ICA driver has been already installed to your Macintosh. If you don't see your machine in the Print & Fax or Print & Scan list, you can - Brother International IntelliFax-2840 | Software Users Manual - English - Page 79
machine. 7 Resolution: Choose the resolution you want to scan your document at. Scan Size or Size (Mac OS X 10.7.x only): Select the paper as one item and saved as one file. Image Correction: From the manual setting you can adjust Brightness, Contrast (Mac OS X 10.7.x only) and Threshold. - Brother International IntelliFax-2840 | Software Users Manual - English - Page 80
tab on the screen, remove your machine by clicking the - button from the Print & Fax or Print & Scan list. Then add the machine by clicking the + button. 7 e Click Scanner. f Go to step e of Scanning a document using the ICA driver (Mac OS X 10.6.x - 10.7.x) uu page 73 to continue. The screens vary - Brother International IntelliFax-2840 | Software Users Manual - English - Page 81
change the settings, you can upload them directly to the machine. Note The RemoteSetup application icon is in Macintosh HD/Applications/Brother. 8 OK Lets you start uploading data to the machine and exit the Remote Setup application. If an error message is displayed, enter the correct data again - Brother International IntelliFax-2840 | Software Users Manual - English - Page 82
Remote Setup Export Lets you save the current configuration setting to a file. Import Lets you read the setting from a file. Note You can use the Export and Import buttons to save Quick Dial or all your settings for your machine. 8 77 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 83
Minimum Speed Minimum RAM Recommended RAM Hard Disk Space to install For For Drivers Applications Supported PC Software Functions Windows® Operating System Windows® XP Home 1 Windows® XP Professional 1 Intel® Pentium® II or equivalent 128 MB 256 MB 150 MB 500 MB Printing, PC-Fax Send - Brother International IntelliFax-2840 | Software Users Manual - English - Page 84
party USB ports are not supported. 3 PC-Fax supports black and white only. PC-Fax is available only for FAX-2940. 4 Scanning is available only for FAX-2940. 5 Scanning is not available for Mac OS X 10.5.8 users. For the latest driver updates, visit us at http://solutions.brother.com/. All trademarks - Brother International IntelliFax-2840 | Software Users Manual - English - Page 85
15, 18 B Brightness Macintosh 74 Windows 38 C Contrast Macintosh 74 Windows 38 D Drivers Macintosh ICA 73 printer 54 Windows® printer 4 TWAIN 35 WIA 29 E Edit a Profile 21 F FAX (PC-FAX) Macintosh address book 70 sending 67 Windows® address book 48 cover page 45 group 49 sending 43 - Brother International IntelliFax-2840 | Software Users Manual - English - Page 86
Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, CANADA H9B 3H6 Visit us on the World Wide Web http://www.brother.com/ These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will only support machines purchased in their own countries.
Software User’s Guide
Not all models are available in all countries.
For FAX users; This documentation is for both MFC and FAX models. Where it says 'MFC' in this User’s
Guide, please read 'MFC-xxxx' as 'FAX-xxxx'.
Version 0
USA