Brother International Innov-is 6750D Operation Manual for Premium Pack III Opt
Brother International Innov-is 6750D Manual
View all Brother International Innov-is 6750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International Innov-is 6750D manual content summary:
- Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 1
Upgrade KITIII Operation Manual - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 2
Frame 3 Selecting a Pattern ...4 Hooping the Fabric in the Border Embroidery Frame 6 Attaching the Border Embroidery Frame to the Embroidery Unit 7 Embroidering the First Pattern 8 Removing the Border Embroidery Frame 9 Embroidering the Next Pattern 9 USING THE CAMERA TO CONNECT PATTERNS - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 3
BEFORE YOU START It is important to perform the upgrade according to the procedure described in the Installation Guide. The machine can then be used as described in the Operation Manual. The border embroidery frame (30 cm × 10 cm (approx. 113/4 inches × 4 inches)) will show on the LCD screen of the - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 4
frame is not being used, unlock it before storing it. • Due to its construction, the border embroidery frame does not hold fabric as tightly as other frames. Since fabric shrinkage may occur, depending on the fabric and pattern used, be sure to sew trial embroidery on a piece of scrap fabric before - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 5
border function to repeat the pattern. Memo • For details for the border function, refer to "Designing Repeated Patterns" in chapter 6 of the Operation Manual for the sewing machine. a b a Border embroidery frame embroidering area (30 cm × 10 cm (approx. 11-3/4 inches × 4 inches)) b Center mark 4 - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 6
pattern. When you are finished, press . Memo • Select the location where the thread mark is to be added according to the direction that the embroidery is repeated. → Touch and , or and to highlight the design for inserting thread marks. Note • Do not add thread marks to character patterns - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 7
stabilizer material larger than the fabric, and then firmly secure the fabric and excess part of the stabilizer material within the border embroidery frame (in the same way as when the normal embroidery frame is used). Otherwise, misaligned patterns may result. Hooping the Fabric in the Border - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 8
in the upper frame, align the center mark (line) on the fabric with the guide line on the embroidery sheet, and then press down on the left and right locking levers until they click into place. f Remove the embroidery sheet, and then gently pull the four sides of the fabric to remove any - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 9
the pattern may not embroider correctly or the presser foot may strike the border embroidery frame and cause injuries. b Thread the machine, and then start embroidering. CAUTION • Do not touch the border embroidery frame while embroidering. → When embroidering is finished, the thread mark is sewn - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 10
to its initial position, even after the thread is cut, turn off the machine, manually gently move the carriage, and then remove the border embroidery frame. • Only move the embroidery unit carriage when the machine is turned off. a Pattern embroidered first b Position of pattern to be embroidered - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 11
c Use to select the needle position that will align with the thread mark at the end of previous embroidery. For this example, align the needle position with the upper center of the next pattern. When you are finished, press . d Use to align the needle - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 12
. To continue embroidering a repeating pattern, repeat the procedure starting with "Removing the Border Embroidery Frame". CAUTION • If the sewing machine is turned off, then turned on again with the border embroidery frame attached or if you try to select a stitch from the Utility Stitch screen - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 13
USING THE CAMERA TO CONNECT PATTERNS Instead of using thread marks, the camera can be used to connect patterns in the Embroidery Edit screen. An area of 27 cm × 17 cm (10-1/2 inches × 6-1/2 inches) can be embroidered when the camera is used to connect patterns. Select the - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 14
or without embroidery unit attached to machine. If attached, message screens will appear regarding movement of embroidery unit. c Press the "Automatic Threading" button. d Follow the on-screen instructions to complete is dirty. If you have no new stickers, contact your nearest Brother dealer. 13 - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 15
. If "NG" appears, remove the sticker, and then follow the on-screen instructions to repeat steps 3 and 4 of Stepd. If multiple attempts to set the position are not successful, contact your nearest Brother dealer. Practice (Connecting Three Patterns) In order to practice aligning pattern edges - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 16
attach the frame to the embroidery machine. f Lower the presser foot, and then embroider the first pattern. g After embroidering of the first pattern is finished, the following message appears. Press . d Press e Press to display the sewing screen. in the sewing screen. h When the following - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 17
i Select the second pattern (2) for practicing, and then press . k When the pattern connection setting screen appears, select the reference edge and reference point of the first pattern for connecting the next pattern. Since, in this example, we will connect the center point of the bottom - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 18
BE CONNECTED" on page 29. m Prepare two embroidery positioning stickers. We will follow the on-screen instructions to affix these two stickers to the fabric so Brother dealer. If any other sticker is used, the camera may not recognize it. • The 182 mm × 257 mm (7 inches × 10 inches) embroidery - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 19
both the positioning stickers are within the embroidery sewing area. Reattach the frame and press . → The camera detects the second positioning sticker. a Pattern to be embroidered next b Centers of large circles for stickers c Embroidery sheet Note • If the machine detects that the next pattern and - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 20
either of the following messages appear, rehoop the fabric so that the next pattern and both the positioning stickers are within the embroidery sewing area as indicated in the screen. Press , and then press the positioning stickers. to detect r After the positioning stickers have been detected - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 21
t When the following message appears, press . v Before embroidering, press to display the pattern connection setting screen. Select the reference edge and reference point for connecting the second and third patterns, and then press . In this example, we will select the bottom point of the - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 22
reference point b Second pattern (2) c Third pattern (3) → Message appears on screen and carriage will move after pressing . x Follow the on-screen instructions to perform steps m through r. → After embroidering is finished, is no longer highlighted or located at the top right of LCD screen - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 23
that appear after step o on page 18 in order to move the positioning stickers. For an example, the on-screen instruction appears when you use the embroidery frame with a size of 10 cm × 10 cm (4 inches × 4 inches) to connect patterns as shown below. Note • When referring to steps a through - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 24
next pattern or affixed positioning stickers are close to being out of the embroidering area. Follow the instructions and then press . c Select the area containing one of the two positioning stickers, and then the screen, and then press . a Pattern to be embroidered next b Embroidery sheet 23 - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 25
second sticker and then press . e Affix the two positioning stickers again according to the on-screen instructions so that the next pattern or positioning marks can fit in the embroidery area. → The camera detects the second positioning sticker. → Press so that the camera detects the first - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 26
While making sure that the positioning stickers do not peel off, rehoop the fabric according to the example displayed on the on-screen instruction. a a Embroidering area a Pattern to be embroidered next b Embroidery sheet h Continue the operation from step q on page 19 after pressing . 25 - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 27
CONNECTING ROTATED PATTERNS Greater design variations can be created by rotating patterns. The following procedure describes how to connect patterns that are rotated. b Press in the pattern editing screen. A: First pattern B: Second pattern a Select the pattern, and then press . → The pattern - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 28
CONNECTED" listed on page 29, to join the first and the second patterns along an edge. Rectangles and patterns (not angled) A A B B a Rectangle • Pressing in the sewing screen changes the angle at which patterns are connected. d Press to display the - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 29
k Select the reference edge and reference point for connecting this pattern to the next one. Press . l Select the reference edge and reference point corresponding to those for the first pattern, and then press . a a a Reference edge and reference point of first pattern a Reference edge and - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 30
can be set up to ±99.9 mm. Note • The arrangement of patterns displayed in the screen may differ slightly from the actual embroidery. Use a ruler to measure the vertical and horizontal a shifts before changing the settings. b a b a First pattern b Second pattern a First pattern b Second - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 31
slide distance is to be measured. A: First pattern B: Second pattern ■ Measuring the Distance That the Pattern Will Be Slid a Set "Embroidery Basting Distance" in the settings screen to "0.0". c Continue to the sewing screen, and then press to select the basting function. → changes to . 30 - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 32
e Select the reference edge and reference point for connecting this pattern to the next one, and then press . a Vertical: 32.8 mm b Horizontal: 42.8 mm ■ Trial Sewing Sew trial embroidery to check that the pattern will be slid the correct distance. a Select the pattern, and then continue to the - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 33
. h Continue with step m of "Practice (Connecting Three Patterns)" to finish connecting the patterns. Note • After checking that the trial embroidery results are satisfactory, sew the actual embroidery. If you decide to change the distance that the pattern is slid after checking the trial - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 34
pattern. Press the pattern connection key . Begin embroidering the first pattern. È Finish embroidering the first pattern. (A) If the machine is turned off during any operation in this box, the machine will return to (A) when it is turned on again. Finish detecting positioning stickers. (B) If the - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 35
with z have been rotated. Check your design placement prior to embroidering. • In this section, the sizes of embroidery patterns describe the sizes when you recall the pattern to your sewing machine. No. 01 : XKIT3B01.pes 43 min 1 (406) 2 (420) 3 (399) 4 (420) 5 (399) 6 (420) 7 (406) 28.1 cm 9.2 cm - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 36
No. 07 : XKIT3B07.pes 17 min 1 (406) 2 (509) 3 (206) 4 (337) 5 (406) 6 (509) 7 (206) 8 (337) 9 (406) 10 (509) 11 (206) 12 (337) 13 (406) 28.4 cm 9.4 cm z No. 09 : XKIT3B09.pes 27 min 1 (420) 6 (420) 11 (399) 16 (399) 2 (079) 7 (079) 12 (420) 17 (420) 3 (017) 8 ( - Brother International Innov-is 6750D | Operation Manual for Premium Pack III Opt - Page 37
Version 3.1 or later English 111-001
Upgrade KIT
III
Operation Manual