BenQ XL2411P Resolution file

BenQ XL2411P Manual

Get BenQ XL2411P PDF manuals and user guides View all BenQ XL2411P manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ XL2411P manual content summary:

  • BenQ XL2411P | Resolution file - Page 1
    For the best display performance, please set the supports this resolution. Software video drivers are often updated and available for new hardware video resolutions. If necessary, you may need to replace and update the PC video card hardware to be able to support the native resolution of the monitor
  • BenQ XL2411P | Resolution file - Page 2
    highest possible refresh rate on an LCD display, because it is not technically possible for an LCD display to flicker. The best results are obtained by using the factory modes already set in your computer. Check next chapter to see the factory modes: Preset display modes on page 3. You can choose 60
  • BenQ XL2411P | Resolution file - Page 3
    on the available input source, the supported timing and resolution may vary. HDMI v v v v v v v v v v v v v v v v v v v v v v Supported resolution for 3D playback (through DVI-DL) 3D content can only be played when the display is set to 1920 x 1080 @ 120Hz. To obtain the best image quality, refer
  • 1
  • 2
  • 3
1
Adjusting the screen resolution
Adjusting the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always
fixed. For the best display performance, please set the display to its maximum resolution with an
aspect ratio of 16:9. This is called “Native Resolution” or maximal resolution – that is, the
clearest picture. Please refer to the table below for the native resolution of your LCD. Lower
resolutions are displayed on a full screen through an interpolation circuit. Image blurring across
pixel boundaries can occur with the interpolated resolution depending upon the image type and
its initial resolution.
1.
Open
Display Properties
and select the
Settings
tab.
You can open
Display Properties
by right-clicking on the Windows desktop and selecting
Properties
from the pop-up menu.
2.
Use the slider in the
Screen area
section to adjust the screen resolution.
Select the recommended resolution (maximum resolution) then click
Apply
.
3.
Click
OK
then
Yes
.
4.
Close the
Display Properties
window.
If your input source does not provide an image with a 16:9 aspect ratio, the displayed image may
appear stretched or distorted. To maintain the original aspect ratio, image scaling options can be
found in the
Display Mode
adjustment. See the user manual for more information.
• To take full advantage of LCD technology you should select the native resolution setting of your PC screen as
described below. Be aware that not all PC video cards provide this resolution value. If yours doesn't, check
with the video card manufacturer's website for an updated driver for your particular model PC video card
which supports this resolution. Software video drivers are often updated and available for new hardware video
resolutions. If necessary, you may need to replace and update the PC video card hardware to be able to
support the native resolution of the monitor.
• Depending on the operating system on your PC, different procedures should be followed to adjust the screen
resolution. Refer to the help document of your operating system for details.
If you select some other resolution, be aware that this other resolution is interpolated and may not accurately
display the screen image as well as it could do at the native resolution setting.