BenQ WDC20 White Paper

BenQ WDC20 Manual

Get BenQ WDC20 PDF manuals and user guides View all BenQ WDC20 manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ WDC20 manual content summary:

  • BenQ WDC20 | White Paper - Page 1
    WDC10/20 InstaShowTM Series Security White Paper
  • BenQ WDC20 | White Paper - Page 2
    module system ...8 The light module system...8 The EMI/ESD module system ...8 The PCB module system ...9 BenQ ecoFACTS self declaration ...9 Streaming flow protection...9 InstaShowTM Series system architecture...9 InstaShowTM Series network architecture...12 Conclusion ...16 2 January 2020
  • BenQ WDC20 | White Paper - Page 3
    the InstaShowTM Series supports two types of video input interfaces, HDMI and USB Type-C. USB Type-C supports the InstaShowTM Series Setup The main device of InstaShowTM WDC10/WDC10C comes with one receiving device (Host) and two transmission devices (Button).The user just needs to connect one Button
  • BenQ WDC20 | White Paper - Page 4
    control signals on the HID device to the Button through the USB cable.Therefor the USB cable on the Button in the InstaShowTM S not only provides power, but also supports receiving of HID commands to send back the HID commands received from the USB Type A port on the host with encryption wirelessly
  • BenQ WDC20 | White Paper - Page 5
    InstaShowTM Setup InstaShowTM S Setup 5 January 2020
  • BenQ WDC20 | White Paper - Page 6
    with Client .Wi-Fi: Web UI Communication with Client . USB Micro-B(InstaShow TM)/ DC Jack(InstaShowTM S) Power supply .USB Type A(InstaShowTM S only) Connect to HID device .HDMI Video / Audio output Physical I/O on the Button: .LED GPIO control .Button(s) GPIO Scan .Wi-Fi: Communication with Host
  • BenQ WDC20 | White Paper - Page 7
    USB Type-C. USB Type-C transmits DisplayPort A/V signals through supporting DisplayPort alternate mode. Because HDMI and DisplayPort are fully digitalized A/V signals, they support uncompressed audio and video signals and both are protected by HDCP regulations.The Host and Button in the InstaShowTM
  • BenQ WDC20 | White Paper - Page 8
    belongs to client side equipment, the Button uses a closed system design.Therefore external threats cannot go through HDMI, USB Type A, or USB Type-C channels to threaten, penetrate and attack the system.The wireless transmission in the InstaShowTM Series has also acquired RF safety certifications
  • BenQ WDC20 | White Paper - Page 9
    InstaShowTM Series a clean and friendly workspace. BenQ ecoFACTS self declaration Since 2001 all BenQ products have the ecoFACT label added to clearly tell you that BenQ presentations. InstaShowTM Series system architecture The operating procedure of the InstaShowTM Series is that the Button receives
  • BenQ WDC20 | White Paper - Page 10
    Wireless AP Video Decode HDMI Transmitter HDMI w or w/o HDCP 1080P / 4K(InstaShowTM S) Video Sink (TV, Project) Wi-Fi 802.11ac WPA2 PSK AES 128 w/o HDCP/DPCP HDMI cable HDMI / USB Type-C cable 1080P Video Source (DVD, PC, NB) Flow HDMI/DP source ↓ Button ↓ Host ↓ HDMI sink Transmission medium
  • BenQ WDC20 | White Paper - Page 11
    -Fi (4) Video and audio signal decompress (5) HDMI signal encode (6) HDMI output w/o HDCP Wireless AP Video Decode HDMI Transmitter HDMI w/o HDCP 1080P / 4K(InstaShowTM S) Video Sink (TV, Project) Wi-Fi 802.11ac WPA2 PSK AES 128-bit Wireless Station Video Encode Screen Capture by Framework HDMI
  • BenQ WDC20 | White Paper - Page 12
    layers of the system. USB Type A: Only provides the Button with DC 5V/0.9A power, does not support simplex/duplex data transmission functions. The USB Type A of InstaShowTM S supports HID command transmissions, but does not support simplex/duplex data transmissions. USB Micro-B: Only provides Host
  • BenQ WDC20 | White Paper - Page 13
    firmware updates but does not support Internet access functions. The Ethernet of InstaShowTM S supports Internet w/ firewall function. Since the authentication mechanism for communication connections between the Host and the Button will not go through the above-mentioned physical ports, hackers
  • BenQ WDC20 | White Paper - Page 14
    the TLS (Transport Layer Security) layer of the network layer, the Host end needs to ensure if the Button has passed the security authentication mechanism in the InstaShowTM Series upon creation of the identity authentication. After connection is established between the two parties, the Host still
  • BenQ WDC20 | White Paper - Page 15
    InstaShowTM Series system configuration uses a Web UI to ensure authenticated connections through HTTP service 2. . Make sure the MAC address of the Button is in the Host list for the Host and the supports InstaShare before a connection can be established with the Host from that device. (InstaShowTM
  • BenQ WDC20 | White Paper - Page 16
    : ll pure H/W solution, plug & play, no need to execute or install software, intuitive operation without additional learning.The InstaShowTM Series can provide comprehensive protection of transmitted data, BenQ will keep on protecting the environment and delivering a friendly product use experience
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
WDC10/20
InstaShow
TM
Series
Security White Paper