BenQ PD2500Q Resolution file
BenQ PD2500Q Manual
 |
View all BenQ PD2500Q manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ PD2500Q manual content summary:
- BenQ PD2500Q | Resolution file - Page 1
monitor monitor supports this resolution. Software video drivers are often updated and available for new hardware video resolutions. If necessary, you may need to replace and update the PC video card hardware to be able to support the native resolution of the monitor with the monitor aspect ratio - BenQ PD2500Q | Resolution file - Page 2
click the Display icon in Control Panel. 2. From the Adjust resolution window and click the Advanced button. 3. Select the Monitor tab, and select an appropriate refresh rate to match one of the applicable factory modes as listed in the specification table. 4. Click Apply, OK, then Yes. 5. Close - BenQ PD2500Q | Resolution file - Page 3
with UHD panel Timing support PC / Video signal support Input port Resolution Frame v 60 v v 75 v v 60 v v 60 v v 60 v v 24 v v 25 v v 30 v v 50 v v 60 v v 60 v v 24 v v 25 v v 30 v v 50 v v 60 v v v v • To obtain the best image quality - BenQ PD2500Q | Resolution file - Page 4
Models with QHD panel Timing support PC / Video signal support Input port Resolution Frame frequency (Hz) DisplayPort 25, 30 v v 50, 60 v v 24, 25, 30 v v 50, 60 v v YCbCr 4:4:4 / RGB 4:4:4 8 bit 10 bit 24, 25, 30 v v 50, 60 v v 24, 25, 30 v v 50, 60 v v For PD2710QC / PD2500Q - BenQ PD2500Q | Resolution file - Page 5
situation by altering an automatic setting or by manually changing the phase setting and the pixel frequency from the "DISPLAY" menu. 2/17/2017 Preset display modes 5
-
1 -
2 -
3 -
4 -
5
 |
 |
1
Adjusting the screen resolution
Adjusting the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always
fixed. For the best display performance, please set the display to its maximum resolution that is
the same with the monitor aspect ratio. This is called “Native Resolution” or maximal resolution
– that is, the clearest picture. Lower resolutions are displayed on a full screen through an
interpolation circuit. Image blurring across pixel boundaries can occur with the interpolated
resolution depending upon the image type and its initial resolution.
1.
Open
Screen Resolution
.
You can open
Screen Resolution
by right-clicking on the Windows desktop.
2.
Use the slider in the
Resolution
section to adjust the screen resolution.
Select the recommended resolution (maximum resolution) then click
Apply
.
3.
Click
OK
then
Yes
.
4.
Close the
Screen Resolution
window.
If your input source does not provide an image which is the same with the monitor aspect ratio,
the displayed image may appear stretched or distorted. To maintain the original aspect ratio,
image scaling options can be found in the “Display Mode” adjustment. See the user manual for
more information.
To find out the monitor aspect ratio and native resolution of the purchased model, please check the Specification
document on the provided CD.
• To take full advantage of LCD technology you should select the native resolution setting of your PC screen as
described below. Be aware that not all PC video cards provide this resolution value. If yours doesn't, check
with the video card manufacturer's website for an updated driver for your particular model PC video card
which supports this resolution. Software video drivers are often updated and available for new hardware video
resolutions. If necessary, you may need to replace and update the PC video card hardware to be able to
support the native resolution of the monitor.
• Depending on the operating system on your PC, different procedures should be followed to adjust the screen
resolution. Refer to the help document of your operating system for details.
If you select some other resolution, be aware that this other resolution is interpolated and may not accurately
display the screen image as well as it could do at the native resolution setting.