BenQ HT3550 RS232 Control Guide

BenQ HT3550 Manual

Get BenQ HT3550 PDF manuals and user guides View all BenQ HT3550 manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ HT3550 manual content summary:

  • BenQ HT3550 | RS232 Control Guide - Page 1
    W2700/ HT3550 Projector RS232 Command Control Installation Guide
  • BenQ HT3550 | RS232 Control Guide - Page 2
    Table of Contents Introduction ...3 Wire arrangement...3 RS232 pin assignment ...3 Connections and communication settings 4 RS232 serial port with a crossover cable ...4 Settings ...4 RS232 via LAN...6 Settings ...6 RS232 via HDBaseT...6 Settings ...6 Command table ...8 2
  • BenQ HT3550 | RS232 Control Guide - Page 3
    describes how to control your BenQ projector via RS232 from a computer. Follow the procedures to complete the connection and settings first, and refer to the command table for RS232 commands. Available functions and commands vary by model. Check the specifications and user manual of the purchased
  • BenQ HT3550 | RS232 Control Guide - Page 4
    Choose one of the connections and set up properly before RS232 control. RS232 serial port with a crossover cable D-Sub 9 pin (male) on a projector PC or laptop Communication cable (crossover) D-Sub 9 pin (female) Settings On-screen images in this document are for reference only. The screens may
  • BenQ HT3550 | RS232 Control Guide - Page 5
    2. Choose Serial and the corresponding COM port as the communication port. In this given example, COM6 is selected. 3. Finish Serial port setup. Baud rate Data length Parity check Stop bit Flow control 9600 bps 8 bit None 1 bit None 5
  • BenQ HT3550 | RS232 Control Guide - Page 6
    the same network. 2. Input 8000 in the TCP port # field. RS232 via HDBaseT HDBaseT compatible device D-Sub 9 pin RJ45 RJ45 port on a projector PC or laptop D-Sub 9 pin LAN cable Settings 1. Determine the COM Port name used for the RS232 communications in Device Manager. 2. Choose Serial
  • BenQ HT3550 | RS232 Control Guide - Page 7
    3. Finish Serial port setup. Baud rate Data length Parity check Stop bit Flow control 9600 bps 8 bit None 1 bit None 7
  • BenQ HT3550 | RS232 Control Guide - Page 8
    specification, input sources, settings, etc..  Commands are working if the standby power is 0.5W or a supported baud rate of the projector is set.  Uppercase, lowercase, and a mixture of both types of characters are accepted for a command.  If a command format is illegal, it will echo Illegal
  • BenQ HT3550 | RS232 Control Guide - Page 9
    Write Volume level for customer *vol=value# YES Read Volume Status *vol=?# YES Write Mic.Volume + *micvol=+# NO Write Mic.Volume - *micvol=-# NO Read Mic.Volume Status *micvol=?# NO Write Audio pass Through off *audiosour=off# NO
  • BenQ HT3550 | RS232 Control Guide - Page 10
    Write Tint - *tint=-# YES Write Set Tint value *tint=value# YES Read Get Tint value *tint=?# YES Write Sharpness + *sharp=+# YES Write Sharpness - *sharp=-# YES Write Set Sharpness value *sharp=value# YES Read Sharpness value
  • BenQ HT3550 | RS232 Control Guide - Page 11
    search *QAS=on# NO Write Quick auto search *QAS=off# NO Read Quick auto search status *QAS=?# NO Read Projector Position Status *pp=?# YES Write Direct Power On-on *directpower=on# YES Write Direct Power On-off *directpower=off#
  • BenQ HT3550 | RS232 Control Guide - Page 12
    Read Standby Settings-Monitor *standbymnt=?# NO Out Status Write 2400 *baud=2400# NO Write 4800 *baud=4800# NO Write 9600 *baud=9600# NO Write 14400 *baud=14400# NO Baud Rate Write 19200 *baud=19200# NO Write 38400 *baud=
  • BenQ HT3550 | RS232 Control Guide - Page 13
    Read Freeze Status *freeze=?# YES Write Menu On *menu=on# YES Write Menu Off *menu=off# YES Write Up *up# YES Write Down *down# YES Write Right *right# YES Write Left *left# YES Write Enter *enter# YES
  • BenQ HT3550 | RS232 Control Guide - Page 14
    NO Write save Lens memory 10 *lenssave=m10# NO Write Reset Lens to center *lensreset=center# NO Only for service Service Write Service mode enable for *error=enable# YES error report Read Error code report *error=report# YES Read FAN 1 speed
  • BenQ HT3550 | RS232 Control Guide - Page 15
    =+# YES *tint=-# YES Write Set Tint value *tint=value# YES Read Get Tint value *tint=?# YES Write Set BenQ gamma value *gamma=value# YES Read Gamma value status *gamma=?# YES Write Set HDR Brightness value *hdrbri=value# YES
  • BenQ HT3550 | RS232 Control Guide - Page 16
    Write Set Blue Offset value *BOffset=value# YES Read Get Blue Offset value *BOffset=?# YES Write Primary Color *primcr=value# YES Read Primary Color Status *primcr=?# YES Write Hue + *hue=+# YES Write Hue - *hue=-# YES Write
  • BenQ HT3550 | RS232 Control Guide - Page 17
    BenQ.com © 2018 BenQ Corporation All rights reserved. Rights of modification reserved. Version: 1.01-C 17
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
W2700/ HT3550
Projector RS232 Command Control
Installation Guide