BenQ BenQ MW814ST Short-Throw Network Projector MW814ST User Manual
BenQ BenQ MW814ST Short-Throw Network Projector Manual
View all BenQ BenQ MW814ST Short-Throw Network Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ BenQ MW814ST Short-Throw Network Projector manual content summary:
- BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 1
MW814ST Digital Projector User Manual Welcome - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 2
of contents Important safety instructions 3 Introduction 7 Projector features 7 Shipping contents 8 Projector exterior view 9 Controls Maintenance 50 Care of the projector 50 Lamp information 51 Troubleshooting 57 Specifications 58 Projector specifications 58 Dimensions 59 Ceiling - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 3
this could cause the objects to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press BLANK on the projector or remote control. 4. Always open the lens shutter (if any) or remove the lens cap (if any) when the projector lamp is on. Important safety instructions 3 - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 4
operate lamps beyond the projector. There are dangerous high rated lamp life. Excessive operation of voltages inside which may cause death lamps beyond the rated life could if you should come into contact with cause them to break on rare occasions. live parts. The only user serviceable part - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 5
it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 3000 m (10000 feet) 0 m (0 feet) 16. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5 - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 6
projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply's power outlet and call BenQ to have the projector serviced the projector should its attachment to the mounting bracket become loose. Hg - Lamp contains mercury - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 7
optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features. • Network Settings allowing management of projector status from a computer using a web browser • 3D function to enjoy the 3D movies, videos, and sporting - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 8
. *The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Projector Power cord VGA cable Quick start guide User manual CD Warranty card* Remote control with battery Pull the tab before using the remote control. Optional accessories - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 9
Projector exterior view Front/upper side 1. Lamp cover 2. External control panel 2 (See "Controls and functions" on page 10 1 for details.) 3. Vent (heated air exhaust) 5 4. Quick-release button 5. Focus ring 3 6 6. Vent (cool air - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 10
light Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. 3. MENU/EXIT Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings. 11. 4. Left/ Decreases the projector volume. 12. 5. BLANK Used to hide - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 11
/ Up, / Down) 7 1 Manually corrects distorted images 8 resulting from an selection bar. 12. MODE/ENTER Toggles the projector between standby mode Selects an available picture setup picture. 14. Timer Set up 5. Digital Zoom (+, -) Enters presentation timer setting directly. Magnifies - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 12
sensors on the projector that might obstruct the infra-red beam. • Operating the projector from the front • Operating the projector from the rear • Dispose of the used battery according to the battery manufacturer's instructions. • Never throw a battery into a fire. There may be danger of an - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 13
is the suspended upside-down from the ceiling most common way to position the projector behind the screen. for quick setup and portability. Note that a special rear projection screen and the BenQ Projector Ceiling Mount Kit are required for this installation location. Set Rear Ceiling in the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 14
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size. For example, if you are using a 120-inch, 4:3-aspect-ratio screen and the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 15
(c) Vertical offset (mm) 50 62 75 93 112 125 137 149 168 187 B1 (a) Screen Center of lens B2 (a) Screen Center of lens (c) (b) (c) (b) Table B1: The screen aspect ratio is 4:3 and the projected picture is 4:3 (a) (mm) 91 114 137 171 206 229 251 274 309 343 Positioning your projector 15 - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 16
152 3429 5486 2681 171 3810 6096 2979 191 C (a) Screen Center of lens (c) (b) Table C: The screen aspect ratio is 16:10 and the BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 17
each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. • The connection illustrations below are for reference only. The - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 18
COMPUTER 1 jack. • If you wish to use this connection method when the projector is in standby mode, make sure the Monitor Out function is turned on in to YUV. See "Changing Color Space" on page 26 for details. • The projector is only capable of playing mixed mono audio, even if a stereo audio input - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 19
previous activity, it will run the cooling fan for approximately 90 seconds before energizing the lamp. 3. If the projector is activated for the first time, select your OSD language following the onscreen instructions. 4. If you are prompted for a password, press the arrow keys to enter a six-digit - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 20
or the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Switching input signal" on page 26 for details. 2 1 Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 21
refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, you will need to manually correct it following ONE of these steps. • Using the remote control Press / on the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 22
Zoom 3D Sync 3D Sync Invert Teaching Template Analog RGB Off Auto 0 0 Off Disable MENU Exit SYSTEM SETUP: Basic Presentation Timer Language Projector Color Splash Screen My Screen English Front Table Off BenQ BenQ 4. Press MENU/EXIT twice* on the projector or remote control to leave and save the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 23
forget the password. Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set and the power on lock is activated, the projector cannot be used unless the correct - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 24
a short time. Entering the password recall procedure 1. Press and hold Auto on the projector or remote control for 3 seconds. The projector RECALL PASSWORD will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 25
you should you ever forget it. Password Keep this manual in a safe place. 5. Confirm the new password by re-entering the new password. 6. You have successfully assigned a new password to the projector. Remember to enter the new password next time the projector is started. 7. To leave the OSD menu - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 26
display picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the "aspect ratio" setting, which may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" on - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 27
/ENTER to switch to the panning mode and press the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out function, and press Auto to restore the picture to its original size. You - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 28
suitable for images smaller than if resized to full screen. You which are already in a 16:10 could adjust the zoom setting or move the aspect, as it displays them without projector towards the screen to increase the aspect alteration. image size if necessary. You may also need to refocus the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 29
you can follow one of the following steps. • Press MODE/ENTER on the projector or remote control repeatedly until your desired mode is selected. • Go to the modes. See "Setting the User 1/User 2 mode" on page 29 for details. Setting the User 1/User 2 mode There are two user-definable modes if the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 30
According to the detected signal type, there are some user-definable functions available when User 1 or User 2 is selected. Based on your needs, you can make adjustments to these functions by highlighting them and pressing / on the projector or remote control. Adjusting Brightness The higher the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 31
disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc, you can project any image from the disc on the screen and enter the 3D Color Management menu to make adjustments. To adjust the settings: 1. Go to the PICTURE menu and - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 32
presentation timer, press and press / to highlight On and press MODE/ENTER. 8. A confirmation message displays. Highlight Yes and press MODE/ENTER on the projector or remote control to confirm. You will see the message "Timer is On" displaying on the screen. The timer starts counting when the timer - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 33
freeze the image. The word "FREEZE" will display in the upper left corner of the screen. To release the function, press any key on the projector or remote control. If your remote control has the following keys, please note that they cannot be pressed to release the function: LASER, #1, #4, PAGE UP - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 34
can operate under any and all harsh or extreme conditions. Creating your own startup screen In addition to selecting the projector preset startup screen from among BenQ logo, Black or Blue screen, you can make your own startup screen that is a picture projected from your computer or video source - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 35
the sound mute or changing the sound level will not affect the Power On/Off Ring Tone. Controlling the projector through a LAN environment You can manage and control the projector from a remote computer when they are properly connected to the same local area network. Cable connection If you are - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 36
you can use any computer that is on the same local area network to control the projector. • If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher. • The screenshots in this manual are for reference only, and may differ from the actual design. 1. Enter the address of the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 37
, Italian, Spanish, Traditional Chinese, Simplified Chinese, and Japanese. It will display the language of your computer operating system (OS) when connected to the projector. If the language of your OS is not available, it will display the English version. The tools page allows you to manage the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 38
. v. Press Exit to go back to the remote network operation page. The info page displays the information and status of this projector. Press Exit to go back to the remote network operation page. 6. For more information, visit http://www.crestron.com. If you are an IT administrator - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 39
shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector. To protect the lamp, the projector will not respond to any commands during the cooling process. To shorten the cooling time, you can also activate the Quick cooling function. See "Quick - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 40
and the projector model you are Zoom 3D Sync Off/Frame Sequential/Top-Bottom 3D User 1/User 2 Reference Mode Dynamic/Presentation/sRGB/Cinema Brightness Contrast Color Tint 2. Sharpness PICTURE Brilliant Color On/Off Color Temperature Cool/Normal/Warm Primary Color R/G/B/C/M/Y 3D - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 41
Count Down/Count Up Sound Reminder On/Off On/Off Language 4. SYSTEM SETUP: Basic Projector Position Menu Display Time Menu Settings Menu Position Reminder Message Direct Power On Signal Power On hr/2 hr/3 hr/4 hr/8 hr/12 hr On/Off Black/Blue/Purple/BenQ Black/Blue/BenQ/My Screen Operation 41 - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 42
Reset All Settings • Source • Picture Mode 6. INFORMATION Current System Status • Resolution • Color System • Equivalent Lamp Hour • Firmware Version Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 43
image distortion. H. Size Digital Zoom 3D Sync 3D Sync Invert This function is This projector features a 3D function which enables you to enjoy the 3D to wear a pair of 3D glasses to view the 3D images. Video timing: 480i SXGA+@60Hz for Top-Bottom When the 3D Sync function is on: • The brightness - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 44
modes are provided so you can optimize your projector image set-up to suit your program type. listed on the same page below. See "Setting the User 1/User 2 mode" on page 29 for details. Adjusts the brightness 30 for details. 3D Color Management See "3D Color Management" on page 31 for details - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 45
Space" on page 26 for details. Presentation Timer Language Projector Position Menu Settings Reminds the presenter to finish the presentation Display (OSD) menus. See "Using the menus" on page 22 for details. The projector can be installed on a ceiling or behind a screen, or with one or more - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 46
keys" on page 33 for details. Sets the background color for the projector. Splash Screen My Screen Allows you to select which logo screen will display during projector start-up. The following options are available: BenQ logo, My Screen, Black screen, Blue screen. Captures and stores the projected - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 47
using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 48
AMX controller. Mac Address Displays the mac adress of this projector. Returns all settings to the factory preset values. The following settings will still remain: Phase, H. Size, User 1, User 2, Color Space Conversion, Projector Position, High Altitude Mode, Security Settings, Network Settings and - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 49
the PICTURE menu. Resolution Shows the native resolution of the input signal. Color System Shows input system format: NTSC, PAL, SECAM, YUV, or RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. Firmware Version Shows the firmware version of your projector. Operation 49 - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 50
the lens and case clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the lens whenever case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 51
light output will be reduced and result in darker projected pictures. Setting the projector in Economic mode also extends the lamp operation life. To set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings > Lamp Mode menu and press / . • Setting Auto Power Off This function allows the - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 52
lamp at lamp.benq.com OK Notice Replace Lamp Now Lamp>XXXX Hours Order a new lamp at lamp.benq.com OK The lamp MUST be replaced before the projector will operate normally. Press MODE/ENTER to dismiss the message. WARNING Out of Lamp Usage Time Replace lamp (refer to User Manual) Then reset lamp - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 53
image quality by touching the lens, do not touch the empty lamp compartment when the lamp is removed. • This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a proper manner. • To assure optimal performance from the projector, it is recommended that - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 54
in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 8. As shown in - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 55
OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp Settings page displays. Highlight Reset Lamp Timer. A warning message is displayed asking if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be reset to "0". Do not - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 56
shut down automatically. If you try to re- start the projector, it will shut down again. Please contact your dealer for assistance. Lamp events Off Orange Flashing The projector has shut down automatically. If you try to restart the projector, it will shut down again. Please contact your dealer - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 57
direction as well as the height of the projector if necessary. Open the lens cover. Remedy Replace the battery with a new one. Remove the obstacle. Stand within 8 meters (26 feet) of the projector. Remedy Please see "Entering the password recall procedure" on page 24 for details. Troubleshooting 57 - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 58
Specifications Projector specifications All specifications are subject to change without notice. Optical Control Resolution 1280 x 800 WXGA Display system 1-CHIP DMD Lens F/Number F = 2.59 Lamp 220 W lamp Electrical Power supply AC100-240V, 3.3 A, 50-60 Hz (Automatic) Power consumption 295 W ( - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 59
Dimensions 287.3 mm (W) x 114.4 mm (H) x 232.6 mm (D) 232.6 114.4 Ceiling mount installation 207.6 Ceiling Mount screw: M4 x 8 (Max L = 8 mm) 287.3 62 62 77 76.5 34.5 Unit: mm 199.6 78 445.95 397.90 364.40 83.38 141.88 287.3 123.0 232.6 Specifications 59 - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 60
mm) H 1171 1171 Image Width (mm) W 1874 1874 Distance from floor f to bottom of image (mm) 900 900 Distance from a screen surface to projector lens (mm) 916 916 Distance from top case to the top of image(mm) b 1182 1182 Distance from top of c wall mount to ceiling (mm) 50 - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 61
BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector guide only and may differ depending on several factors relating to any specific installation. • The dimensions are based on the projector - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 62
.5 1024 x 576 BenQ Notebook Timing 60.0 35.820 46.966 1024 x 600 BenQ Notebook Timing 64.995 Supported timing for non-3D and 3D signal with Frame Sequential and Top-Bottom format. **Supported timing for non-3D and 3D signal with Frame Sequential format. ***Supported timing for non-3D and 3D - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 63
x 576@60Hz BenQ Notebook Timing 60.00 35.820 46.996 1024 x 600@65Hz BenQ Notebook Timing 64. Supported timing for non-3D and 3D signal with Frame Sequential and Top-Bottom format. **Supported timing for non-3D and 3D signal with Frame Sequential format. ***Supported timing for non-3D and 3D - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 64
67.5 148.5 Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. **Supported timing for non-3D and 3D signal with Frame Sequential format. Supported timing for Video and S-Video inputs Video mode NTSC** PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 Horizontal - BenQ BenQ MW814ST Short-Throw Network Projector | MW814ST User Manual - Page 65
BenQ's written instructions, especially the ambient humidity must be inbetween 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the projector manual or otherwise, without the prior written permission of BenQ Corporation. Disclaimer BenQ
Welcome
MW814ST Digital Projector
User Manual