Asus P2-M3A3200 User Manual
Asus P2-M3A3200 Manual
 |
View all Asus P2-M3A3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus P2-M3A3200 manual content summary:
- Asus P2-M3A3200 | User Manual - Page 1
English E4233 P-Series ASUS PC (Desktop Barebone) Installation manual P2 P4 Download the latest manual from the ASUS website: www.asus.com - Asus P2-M3A3200 | User Manual - Page 2
descriptions, refer to the system User Guide. NOTE: **The system's power supply unit has a 115V / 230V voltage selector switch located beside the power connector. Use this switch to select the appropriate system input voltage according to the voltage supply in your area. Installation manual - Asus P2-M3A3200 | User Manual - Page 3
-inch optical drive and 3.5-inch hard disk drive cage Power supply unit PCI/PCIE card riser bracket (connected to the motherboard PCI/PCIE slot) ASUS motherboard* DIMM sockets CPU socket NOTE: *Refer to the system User Guide for motherboard details. Removing the cover 1. Remove the cover screws on - Asus P2-M3A3200 | User Manual - Page 4
English Installing an Intel® CPU 1. Locate the CPU socket on the motherboard the load plate window to remove (4B). 5. Position the CPU over the socket socket alignment key into the CPU notch. 6. Close the CPU fan cable to the connector on the motherboard. CAUTION. Do not forget to connect the CPU - Asus P2-M3A3200 | User Manual - Page 5
3 NOTE: To reinstall AMD CPU fan and heatsink assembly, follow the instructions in reverse order. CAUTION: After you reinstall a fan and heatsink assembly, do not forget to connect the CPU fan connector! Hardware monitoring error can occur if you fail to plug this connector. Installation manual - Asus P2-M3A3200 | User Manual - Page 6
intend to use. 3. Insert the card connector to the slot, then press the card firmly until it fits in place. Secure the card with a screw. 4. Reinstall the PCI/PCIE riser card assembly. Make sure that the riser card connector sits properly on the motherboard PCI/PCIE slot. Installation manual - Asus P2-M3A3200 | User Manual - Page 7
English Installing optical power (2B) plugs to the connectors at the back of the SATA/IDE hard disk drives. 3. Install the storage drive assembly to the chassis. 4. Secure the storage drive assembly with three screws. IDE 1B 1A SATA 1A 1B SATA IDE 2A 2B 2B 2A 3 R R 4 Installation manual - Asus P2-M3A3200 | User Manual - Page 8
stand to the direction of the arrow until the lock snaps in place. English NOTE: To remove the foot stand, lift the lock, then slightly push the section "Removing the cover" on page 3 in reverse order. NOTE: For P2 model, if your optical drive tray fails to eject when you press the eject button
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
English
P-Series
ASUS PC (Desktop Barebone)
Installation manual
E4233
Download the latest manual from the ASUS website: www.asus.com
P2
P4