Adaptec USB2CONNECT User Guide

Adaptec USB2CONNECT - High Speed USB 2.0 Card Manual

Get Adaptec USB2CONNECT - High Speed USB 2.0 Card PDF manuals and user guides
UPC - 760884151303
View all Adaptec USB2CONNECT manuals
Add to My Manuals
Save this manual to your list of manuals

Adaptec USB2CONNECT manual content summary:

  • Adaptec USB2CONNECT | User Guide - Page 1
    USB2connect Host Bus Adapter User's Guide R
  • Adaptec USB2CONNECT | User Guide - Page 2
    are trademarks of Adaptec, Inc., which may be registered in some jurisdictions. Windows 98, Windows 2000, and Windows Me are trademarks of Microsoft Corporation in the U.S. and other countries, used under license. Macintosh and Power Macintosh are registered trademarks of Apple Computer, used under
  • Adaptec USB2CONNECT | User Guide - Page 3
    -Friday, 3:00 A.M. to 5:00 P.M., Pacific Time. For RAID and Fibre Channel call +1 321-207-2000 Monday-Friday, 3:00 A.M. to 5:00 P.M., Pacific Time. To expedite your service, have your computer in front of you. I To order Adaptec products, including accessories and cables, call +1 408-957-7274. ii
  • Adaptec USB2CONNECT | User Guide - Page 4
    a Technical Support Specialist, call +49 89 456 40660, Monday-Thursday, 9:30 to 12:30 and 13:30 to 16:30; Friday, 9:30 to 12:30 and 13:30 to 15:00, Central European Time. To expedite your service, have your computer in front of you. I To order Adaptec products, including accessories and cables: I UK
  • Adaptec USB2CONNECT | User Guide - Page 5
    and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, is connected. • Consult the dealer or an experienced radio/television technician for help. • Use a shielded and properly grounded I/O cable and power cable to
  • Adaptec USB2CONNECT | User Guide - Page 6
    Overview USB2connect Host Bus Adapter The Adaptec USB2connect Host Bus Adaper is a USB 2.0 PCI host adapter for PC and Macintosh computers that provides connectivity to USB 1.1 and USB 2.0 devices. USB 2.0, or Enhanced Host Controller Interface (EHCI), is the fastest USB standard - capable of
  • Adaptec USB2CONNECT | User Guide - Page 7
    USB 1.1 drivers included with Windows are compatible with USB2connect, so you can ignore the warning. For updated driver information, check the Adaptec Web site at http://www.adaptec.com. I Without a USB 2.0 driver, USB 2.0 devices will run at USB 1.1 speeds even when connected to a USB 2.0 adapter
  • Adaptec USB2CONNECT | User Guide - Page 8
    One Adaptec USB2Connect Host Bus Adapter (AUA-3100LP or AUA-5100) I One 10-foot (3-meter), USB 2.0 certified, high-speed cable used to connect USB devices I Hardware Installation Guide I USB2connect Installation CD Required Operating Systems Microsoft Windows Macintosh Windows 98 SE, Windows 2000
  • Adaptec USB2CONNECT | User Guide - Page 9
    back of your computer) before handling the USB2connect adapter. WARNING: Turn OFF power to the computer and disconnect the power cord. 1 After you turn OFF your computer and unplug the power cord, open the computer cabinet. Note: See your computer documentation for specific instructions on opening
  • Adaptec USB2CONNECT | User Guide - Page 10
    4 Replace the slot cover screw. When installed properly, the card should be level with the expansion slot. 5 Close the computer cabinet and reattach the power cord. The USB2connect AUA-5100 adapter shares one internal and external connector so that only five can be used at one time. The default
  • Adaptec USB2CONNECT | User Guide - Page 11
    USB2connect User's Guide Installing the Windows Drivers Once the USB2connect is installed in your computer, complete the following steps as appropriate for your operating system to install a software driver for the adapter. Note: It is important that you complete the New Hardware Wizard for your
  • Adaptec USB2CONNECT | User Guide - Page 12
    the Windows Drivers 2 If you see a message that the PCI Universal Serial Bus driver was not located, select the option Automatic search for a beetter driver (Recommended). Click Next. 3 If you do not have a USB 2.0 driver for USB2connect, the Add New Hardware Wizard displays the message Windows was
  • Adaptec USB2CONNECT | User Guide - Page 13
    devices, a yellow ! appears before PCI Universal Serial Bus because at this writing there are no 2.0 drivers for USB2connect. However, the USB 1.1 drivers included with Windows Me operating system are compatible with USB2connect. For updated driver information, check the Adaptec Web site at http
  • Adaptec USB2CONNECT | User Guide - Page 14
    on as Administrator or have administrator privileges to install USB2connect in the Windows 2000 operating system. 1 Power up the computer. During the operating system startup, the adapter will be detected and Windows will load embedded drivers for the adapter. Note: It may take longer than usual for
  • Adaptec USB2CONNECT | User Guide - Page 15
    USB2connect User's Guide 3 On the Install Hardware Device Drivers window, select the option Search for a suitable driver for my device (recommended). Click Next. 4 On the Locate Driver Files window, uncheck all the options. Click Next. 10
  • Adaptec USB2CONNECT | User Guide - Page 16
    Installing the Windows Drivers 5 On the Driver Files Search Results window, select the default option Disable the device. Otherwise the operating system will attempt to locate a USB 2.0 driver each time you start the computer. Click Finish. 11
  • Adaptec USB2CONNECT | User Guide - Page 17
    ! appears before Universal Serial Bus (USB Controller) because at this writing there is no 2.0 driver for the USB2connect. However, the USB 1.1 drivers included with the Windows 2000 system are compatible with USB2connect. For updated driver information, check the Adaptec Web site at http://www
  • Adaptec USB2CONNECT | User Guide - Page 18
    Installing the Windows Drivers Windows 98 SE Because the USB2connect has three controllers, (two OCI USB 1.1 and one EHCI USB 2.0) Windows 98 SE requires all these devices to be installed. Please follow these instructions carefully. 1 When the Add New Hardware Wizard opens, click Next. 2 Select
  • Adaptec USB2CONNECT | User Guide - Page 19
    USB2connect User's Guide 4 Select The updated driver (recommended). Click Next. 5 You may see a message that Windows is searching for the driver. Click Next. 6 When you see the following prompt, insert your Windows 98 CD in your CD-ROM drive and click OK. 14
  • Adaptec USB2CONNECT | User Guide - Page 20
    files from box as shown below and click OK. Note: If you have copied your driver files onto your hard drive and know where they are located, you can browse to that folder instead of inserting the Windows 98 CD. Also, your CD-ROM drive may not necessarily be D. 8 When the third
  • Adaptec USB2CONNECT | User Guide - Page 21
    USB2connect User's Guide 9 At this point, the driver for the first OHCI (USB 1.1) controller is installed. To install the driver for the second OHCI controller, repeat steps 1-8. To install the USB 2.0 EHCI driver, repeat steps 1-3. The following window will display. Click Next. 10 Windows displays
  • Adaptec USB2CONNECT | User Guide - Page 22
    Note: Under Other devices, a yellow ! appears before PCI Universal Serial Bus if there is no 2.0 driver for USB2connect. However, the USB 1.1 drivers included with the Windows 98 SE system are compatible with USB2connect. For updated driver information, check the Adaptec Web site at http://www
  • Adaptec USB2CONNECT | User Guide - Page 23
    's Guide Installing the Macintosh Driver 1 Power up the computer. Insert the USB2connect CD into your CD-ROM drive. 2 Double-click the Start Installation Here file on the CD. 3 Follow the instructions to install the latest Macintosh USB drivers, if necessary. 4 Double-click the USB2connect Installer
  • Adaptec USB2CONNECT | User Guide - Page 24
    , high-speed cable is included. This cable plugs into the external connectors on the adapter and then to the external device such as a scanner, as shown below: Note: The USB2connect supports hot-plugging, allowing USB devices to be attached and recognized even when the computer is powered ON
  • Adaptec USB2CONNECT | User Guide - Page 25
    loading the drivers on your Windows 2000 operating system. I Check the troubleshooting section of your operating system user's guide. I Check the Readme file on the USB2connect CD if you encounter any problems with the software. I If the driver fails to load, move the adapter to a different PCI slot
  • Adaptec USB2CONNECT | User Guide - Page 26
    Troubleshooting c In the window that appears, scroll down to the PCI area and click the arrow next to each PCI slot to reveal the PCI adapter information. If the USB2connect adapter is installed properly, you will see the following information listed under one of the slots: If the card is not seen,
  • Adaptec USB2CONNECT | User Guide - Page 27
    R © 2001 Adaptec, Inc. All rights reserved. P/N: 512882-06, Ver AA KM 05/01
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
R
USB2connect Host Bus Adapter
User’s Guide