Adaptec ANA-62022 User Guide

Adaptec ANA-62022 - Duo 64 Enet PCI 10/100MBs 10/100 BT Manual

Get Adaptec ANA-62022 - Duo 64 Enet PCI 10/100MBs 10/100 BT PDF manuals and user guides
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals

Adaptec ANA-62022 manual content summary:

  • Adaptec ANA-62022 | User Guide - Page 1
    DuraLAN™ Fast Ethernet NICs with Duralink64™ Software ANA™-62000/64000 Family User's Guide R
  • Adaptec ANA-62022 | User Guide - Page 2
    , photocopying, recording or otherwise, without the prior written consent of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035. Trademarks Adaptec, the Adaptec logo, DuraLAN, Duralink64, and Single64 are trademarks of Adaptec, Inc., which may be registered in some jurisdictions. Windows
  • Adaptec ANA-62022 | User Guide - Page 3
    , and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is may cause undesired operation. Adaptec, Inc. ANA-62044 ANA-62022 ANA-62011/TX ANA-64044 ANA-62011LV ANA-64022LV ANA-64044LV Tested to Comply with
  • Adaptec ANA-62022 | User Guide - Page 4
    B Information Technology equipment based on VCCI (Voluntary Control Council for Interface). This equipment is designed for home use but it may causes radio frequency interference problem if used too near to a television or radio. Please handle it correctly per this documentation. iv
  • Adaptec ANA-62022 | User Guide - Page 5
    don't lose it. Support Options n Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for articles, troubleshooting tips, and frequently asked questions for your product. n For support via Email, submit your question to Adaptec's Technical Support Specialists at ask.adaptec.com. North
  • Adaptec ANA-62022 | User Guide - Page 6
    13:30 to 15:00, Central European Time. To expedite your service, have your computer in front of you. n French: For support via e-mail, submit your question to Adaptec's Technical Support Specialists at ask-fr.adaptec.com. n To order Adaptec products, including accessories and cables, call +32 11 300
  • Adaptec ANA-62022 | User Guide - Page 7
    workstations, systems and servers which incorporate an Adaptec RAID controller and may be accessed by may not use the Software in a computer service business, including in time sharing applications. The MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN, RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE
  • Adaptec ANA-62022 | User Guide - Page 8
    or workmanship under normal use and service for a period of thirty (30) days from the date of delivery to you. ADAPTEC AND ITS LICENSORS DO NOT AND , INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR
  • Adaptec ANA-62022 | User Guide - Page 9
    gives its express consent, including an express waiver of the terms of this Agreement, in writing signed by an officer of Adaptec. You assume full responsibility for the use of the Software and agree to use the Software legally and responsibly. This Agreement shall be governed by
  • Adaptec ANA-62022 | User Guide - Page 10
    3-Year Hardware Warranty: Adaptec DuraLAN ANA-64044LV Adaptec DuraLAN ANA-64022LV Adaptec DuraLAN ANA-62011LV Adaptec DuraLAN ANA-64044 Limited 5-Year Hardware Warranty: Adaptec DuraLAN ANA-62044 Adaptec DuraLAN ANA-62022 Adaptec DuraLAN ANA-62011/TX 1. Adaptec, Inc. ("Adaptec") warrants to the
  • Adaptec ANA-62022 | User Guide - Page 11
    LAW, ARE HEREBY EXCLUDED BOTH FOR PROPERTY DAMAGE, AND TO THE EXTENT NOT UNCONSCIONABLE, FOR PERSONAL INJURY DAMAGE. 7. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, AND SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
  • Adaptec ANA-62022 | User Guide - Page 12
    1-4 Performance 1-4 Physical Views 1-5 Link Configurations 1-7 Driver Configurations for Adaptec DuraLAN NICs 1-8 Duralink64 Failover 1-9 Duralink64 Port Aggregation 1-9 FEC (Fast EtherChannel) 1-10 Network Configuration Examples 1-11 Traditional Network Configurations 1-11 Servers with Duralink64
  • Adaptec ANA-62022 | User Guide - Page 13
    Ethernet NICs User's Guide 3 Duralink64 Driver Installation for Windows Before You Begin 3-1 Note on DuraLAN NIC Ports 3-2 Installing the Duralink64 Driver 3-2 HotPlug and Windows 2000/XP 3-2 Windows 2000 and Windows XP with GUI 3-3 Installing Windows NT 4.0 3-7 Installing Windows 98 3-7 Installing
  • Adaptec ANA-62022 | User Guide - Page 14
    5-5 Installing the Duralink64 Driver during NetWare 4.x OS Installation (Not supported) 5-6 Installing the NetWare Driver after OS Installation 5-6 Installing the NetWare Port Aggregation and Failover Drivers 5-7 Configuring the Ports 5-7 Creating the Failover Pair, Port Aggregation or FEC Groups
  • Adaptec ANA-62022 | User Guide - Page 15
    DuraLAN Fast Ethernet NICs User's Guide Verifying Configuration 5-14 Modifying Driver Configurations 5-15 Removing or Uninstalling Drivers 5-15 6 7-3 Restarting the Server 7-4 Removing Drivers 7-4 A Cables and LEDs Connection Types A-2 Full Duplex Support A-2 Cable Requirements A-3 Straight-through
  • Adaptec ANA-62022 | User Guide - Page 16
    Tips Isolating Faulty Hardware B-2 Troubleshooting B-2 Configuring the BIOS B-3 Frequently Asked Questions B-4 Duralink64 Software and DuraLAN NICs - General Questions B-4 Duralink64 v5.x Failover Software Questions B-6 Duralink64 v5.x Port Aggregation Software Questions B-7 Duralink64
  • Adaptec ANA-62022 | User Guide - Page 17
    Driver Configurations for Adaptec DuraLAN NICs Duralink64 Failover Duralink64 Port Aggregation FEC (Fast EtherChannel) Network Configuration Examples 1-1 1-3 1-4 1-7 1-8 1-9 1-9 1-10 1-11 General Information This user's guide describes how to install your Adaptec DuraLAN™ Fast Ethernet Network
  • Adaptec ANA-62022 | User Guide - Page 18
    DuraLAN Fast Ethernet NICs User's Guide Fast Ethernet Fast Ethernet is a networking standard defined by the Institute of existing networks. Reference Sources s To use Duralink64 drivers with the Linux OS, or to download Linux drivers, refer to Adaptec's web site at: http://www.adaptec.com
  • Adaptec ANA-62022 | User Guide - Page 19
    -PCI bridge chip s Multiport NICs require PCI 2.1-compliant bus Note: Each port on an Adaptec DuraLAN NIC needs an IRQ (Interrupt Request) number/line. The system BIOS allocates the IRQs to the various ports. Adaptec NICs support IRQ sharing and can share interrupts with other PCI devices that are
  • Adaptec ANA-62022 | User Guide - Page 20
    Although Duralink64 drivers support older versions of Windows and NetWare, Adaptec does not support any OS that is no longer supported by its developer. Hardware Overview Adaptec provides the following PCI 10/100 DuraLAN Fast Ethernet NIC models: 64-Bit 33 MHz PCI ANA-62044 ANA-62022 ANA-62011/TX
  • Adaptec ANA-62022 | User Guide - Page 21
    MB/sec Increased Efficiency Data moves at more efficient rates with the DuraLAN 64-bit NICs: 128 bytes are transferred in 16-PCI cycles. Physical s Selection of single-, two-, and four-port NICs s Autosensing s Full Duplex Mode support s Ports can run at independent speeds for maximum flexibility
  • Adaptec ANA-62022 | User Guide - Page 22
    DuraLAN Fast Ethernet NICs User's Guide ANA-64044LV, ANA-64044, and 62044 RJ-45 Port 1 RJ-45 Port 2 RJ-45 Port 3 RJ-45 Port 4 64-bit PCI 2.1 bus ANA-64022LV and ANA-62022 RJ-45 Port 1 RJ-45 Port 2 64-bit PCI 2.1 bus ANA-62011LV and ANA-62011/TX Single64™ Single RJ-45 Port 1-6 64-bit PCI 2.1
  • Adaptec ANA-62022 | User Guide - Page 23
    Link Configurations Adaptec DuraLAN NICs provide a standard (standalone) port configuration on all supported OSs (see Software Requirements on page 1-3). In a Standalone configuration, each port is independent with its own address. It typically connects to a physically separate network. In addition
  • Adaptec ANA-62022 | User Guide - Page 24
    User's Guide Driver Configurations for Adaptec DuraLAN NICs A number of driver configurations are available for the Adaptec DuraLAN NICs. With the Standalone driver configuration, each port acts like a separate NIC and has its own protocol level address. In this driver configuration, each port or
  • Adaptec ANA-62022 | User Guide - Page 25
    Product Overview Always use the latest software version available for your DuraLAN NIC. Drivers are updated regularly on Adaptec's Web sites, thereby providing enhanced performance and new features. Duralink64 Failover Duralink64 Failover software provides protection from networklink failures on
  • Adaptec ANA-62022 | User Guide - Page 26
    in the event of link failure. Duralink64 software and all of Adaptec DuraLAN NICs support FEC technology, allowing redundancy and high-speed aggregation between switches supporting FEC and servers configured with Adaptec's FEC driver option. FEC is available on select Cisco Catalyst switches and
  • Adaptec ANA-62022 | User Guide - Page 27
    Examples This section provides examples of typical network configurations, and compares them to configurations using Duralink64 Port Aggregation and Duralink64 Failover. It also shows the benefits of using Duralink64 Failover. Traditional Network Configurations The following figure shows a single
  • Adaptec ANA-62022 | User Guide - Page 28
    DuraLAN Fast Ethernet NICs User's Guide server is active while the other is ready to take over if the active server fails. Data is kept current between servers via an MSL.
  • Adaptec ANA-62022 | User Guide - Page 29
    the existing load. The following figure shows a 12-port server using three Adaptec DuraLAN 4-port NICs. In this configuration, the server has a cumulative bandwidth of 1.2 Gigabits/sec on a single virtual segment. Further, the network is fault tolerant; data transmission is uninterrupted if any
  • Adaptec ANA-62022 | User Guide - Page 30
    NICs User's Guide Network without Duralink64 Failover Protection The primary and backup Adaptec DuraLAN Fast Ethernet NICs or ports reside in the server. Duralink64 Failover operates on these NICs to provide redundancy on the server. The backup port does not operate until the primary port fails. The
  • Adaptec ANA-62022 | User Guide - Page 31
    Product Overview Dual Hubs The following figure shows each Adaptec DuraLAN NIC connected to a separate hub to provide redundancy. If the hub port being used by the primary NIC fails, the backup NIC becomes active, and all network traffic is immediately directed through it. Clients Ethernet Hub
  • Adaptec ANA-62022 | User Guide - Page 32
    DuraLAN Fast Ethernet NICs User's Guide Failover Protection with Dual Hubs and Ethernet Switch The following figure shows how Duralink64 Failover, with two failover groups, provides network redundancy to a switched network. Ethernet switches provide network traffic segmentation. Clients Ethernet
  • Adaptec ANA-62022 | User Guide - Page 33
    figure shows failover protection using an Adaptec DuraLAN 4-port NIC. Ports 1 and 3 are used as the primary ports to each Ethernet hub. Ports 2 and 4 are backup ports connected to each hub. Clients Ethernet Hub Port 1 Port 2 Ethernet Hub Port 3 Port 4 NIC Primary Backup Server Clients 1-17
  • Adaptec ANA-62022 | User Guide - Page 34
    2 DuraLAN NIC Installation In This Chapter Installing the DuraLAN NIC 2-2 Connecting the Network Cable 2-4 2-1
  • Adaptec ANA-62022 | User Guide - Page 35
    . 5 Carefully remove the DuraLAN NIC from its antistatic container. 6 Verify the model name on the NIC. 7 Check the NIC for any visible signs of damage that may have occurred during shipment. If you find a problem, immediately notify your network supplier and the shipping service that delivered your
  • Adaptec ANA-62022 | User Guide - Page 36
    DuraLAN NIC Installation 8 Insert the NIC into the expansion slot, pressing down firmly until the bus contacts are seated in place. The slot 64-bit PCI expansion slots Notch 32-bit PCI expansion slots 10 Replace the computer cover. Continue with Connecting the Network Cable on page 2-4. 2-3
  • Adaptec ANA-62022 | User Guide - Page 37
    Ethernet NICs User's Guide Connecting the Network Cable Cable requirements for Adaptec DuraLAN NICs vary according to network speed, cabling standard, and the connector used. See Appendix A, Cables and LEDs on page A-1 for detailed information on cabling. To connect the network cable, follow these
  • Adaptec ANA-62022 | User Guide - Page 38
    : s Verify that all system, memory, and NIC requirements are met. (See System Requirements on page 1-3.) s Verify that the new Adaptec DuraLAN NIC is installed properly in the server. (See Chapter 2, DuraLAN NIC Installation on page 2-1.) s Check your system for installed DuraLAN NIC drivers. 3-1
  • Adaptec ANA-62022 | User Guide - Page 39
    rearrange the network cards, the port names change as well. Installing the Duralink64 Driver In the following sections, aspects relating to driver installation are discussed. Note: All NICs must be updated with the same version driver after installing an Adaptec Duralink64 5.2 driver. This process
  • Adaptec ANA-62022 | User Guide - Page 40
    port name to confirm selection, and click OK. The green LED on the top of the slot where the NIC is located will start to flash. This indicates that the NIC is no longer in service port(s) to the system. Windows 2000 and Windows XP with GUI Windows 2000 and Windows XP include a DuraLAN NIC driver
  • Adaptec ANA-62022 | User Guide - Page 41
    Fast Ethernet NICs User's Guide Installing Windows 2000 To install the DuraLAN driver on a Windows 2000 platform, follow these steps: 1 Hardware tab, and click Device Manager... . 5 Double-click Network adapters. 6 Double-click the appropriate Adaptec DuraLAN NIC. 7 Click the Driver tab. 3-4
  • Adaptec ANA-62022 | User Guide - Page 42
    Upgrade Device Driver window, click Finish to close the wizard. 16 In the Port Properties window, click Close. 17 Repeat Steps 6 through 16 for each Adaptec DuraLAN NIC port that is to be configured. Note: If you are updating Adaptec drivers, make sure to upgrade all Adaptec-based network cards. 3-5
  • Adaptec ANA-62022 | User Guide - Page 43
    Guide Installing Windows XP (Classic View) Installing Windows XP in classic view is almost identical to the Windows 2000 procedure. Windows XP includes a DuraLAN NIC driver -click Network adapters. 7 Double-click the appropriate Adaptec DuraLAN NIC. 8 Click the Driver tab. 9 Click Update Driver... .
  • Adaptec ANA-62022 | User Guide - Page 44
    Network Adapter window, click Have CD. 7 When the Insert CD window appears, insert the Duralink64 for Windows CD, and click OK. 8 In the Select OEM Option window, click the DuraLAN NIC model that is installed, and click OK. 9 In the Adaptec DuraLAN NIC Driver Installation window, select the driver
  • Adaptec ANA-62022 | User Guide - Page 45
    DuraLAN Fast Ethernet NICs User's Guide 3 In the new window, click Search for the best driver for your device (Recommended). 4 Check Removable Media (Floppy, CD-ROM ... ), and Specify a location. 5 Also in the text box under Specify a location, enter the driver path-for example: d:\ (The CD-ROM
  • Adaptec ANA-62022 | User Guide - Page 46
    Installing Windows Me For the initial installation of a DuraLAN driver on your Windows Me platform, follow these steps: In the New Browse Folder, search for the correct directory. Select the directory where the driver for Windows Me resides, and click OK. (If you have more NICs to install, Windows
  • Adaptec ANA-62022 | User Guide - Page 47
    NDIS (Network Driver Interface Specification) driver. Do not use an ODI (Open Data-Link Interface) driver. See Chapter 6, Installing Duralink64 Novell Client on page 6-1. Removing Previously Installed Drivers This section provides instructions for removing the previously installed DuraLAN Standalone
  • Adaptec ANA-62022 | User Guide - Page 48
    Panel. 3 Double-click Network. 4 In the Network window, click the Adapters tab. 5 In the Network Adapters list, click the Adaptec DuraLAN NIC you want to remove, and click Remove. 6 When asked if you wish to continue, click Yes. 7 Repeat Step 5 until all Adaptec DuraLAN drivers are removed. 8 When
  • Adaptec ANA-62022 | User Guide - Page 49
    NICs User's Guide 3 From the System Properties window, select the Device Manager tab, and double-click Network adapters. 4 Select the Adaptec DuraLAN NIC you want to remove, and click Remove. 5 Confirm the device removal by clicking OK. 6 Repeat Steps 4 and 5 for each existing DuraLAN NIC. 7 Restart
  • Adaptec ANA-62022 | User Guide - Page 50
    In This Chapter Note on DuraLAN NIC Ports 4-2 Configuring the Standalone Driver Ports 4-2 Configuring the Ports for Duralink64 Failover 4-6 Creating the Failover Pair 4-8 Monitoring Failover Pairs in Windows NT 4.0 4-10 Configuring Ports for Duralink64 Port Aggregation and FEC 4-11
  • Adaptec ANA-62022 | User Guide - Page 51
    order that the system scans these ports at boot time. Consequently, whenever you physically rearrange the network cards, the port names change as well. Note: Windows 2000 currently does not support SNMP. Configuring the Standalone Driver Ports General Port Configuration in Windows OSs Windows 2000
  • Adaptec ANA-62022 | User Guide - Page 52
    in Windows 2000 and Windows XP To configure the Standalone driver ports in Windows 2000/XP and select the connection type for your Adaptec DuraLAN NIC, follow these steps: 1 Open the Control Panel. 2 In the Control Panel, double-click the Adaptec Duralink icon. 3 In the Duralink64 window, select the
  • Adaptec ANA-62022 | User Guide - Page 53
    mode. To configure the Standalone driver ports in Windows NT 4.0 and select the connection type for your Adaptec DuraLAN NIC, follow these steps: Note: If you are required to insert the Windows NT CD, you must reinstall the latest version of the Microsoft Windows NT Service Pack, then restart the
  • Adaptec ANA-62022 | User Guide - Page 54
    system. Configuring the Ports in Windows 98/Me To configure ports in Windows 98/Me, follow these steps: 1 From the Start menu, point to Settings, and click Control Panel. 2 In the Control Panel, double-click Network. 3 In the Network window, click the appropriate DuraLAN NIC, and click Properties
  • Adaptec ANA-62022 | User Guide - Page 55
    DuraLAN Fast Ethernet NICs User's Guide 4 In the Properties window, click the Advanced tab. Ports in Windows 2000/XP There is no need to configure the ports unless you want to change a specific property value (for example, connection type, receive buffers, and so forth). See Note on DuraLAN NIC Ports
  • Adaptec ANA-62022 | User Guide - Page 56
    the DuraLAN NIC ports appear. Note: Generally, PCI Bus 0 is the PCI Bus on the motherboard. For example, PCI Bus 1 or above is an ANA-6x022 or ANA-6x044 NIC. The PCI Slot represents the port on the NIC starting from the top. The top port starts at PCI Slot 4. 2 In the New Adaptec NIC Ports Available
  • Adaptec ANA-62022 | User Guide - Page 57
    this step, the system assigns a default group name (GroupX). 5 In the Link Aggregation Type field, select Adaptec's Failover. 6 The Available Adaptec Ports list shows all the network ports available in the system. From the Available Adaptec Ports list, select the appropriate port, and click Add. 4-8
  • Adaptec ANA-62022 | User Guide - Page 58
    per group are supported for Failover. To assign TCP/IP addresses to your ports, refer to Assigning the TCP/IP Address on page 4-16. Configuring the Failover Pair in Windows NT 4.0 To create Failover pairs in Windows NT 4.0, follow these steps: 1 From the Available Adaptec Ports list, select the
  • Adaptec ANA-62022 | User Guide - Page 59
    Guide 6 When you are done, click OK. You will return to the Adapters tab of the Network window. indicates that Port 2 is the backup port for Port 1. Note: The Adapters tab identifies one model only, even when several DuraLAN NIC models are installed. The DuraLAN Windows NT Service Pack,
  • Adaptec ANA-62022 | User Guide - Page 60
    Windows NT 4.0 In the Adaptec New Hardware Found window, each port is assigned to Autodetect, the default connection type that always detects port connection and negotiates a compatible speed and transmission mode. ! Caution: This procedure is critical. Only one DuraLAN driver can exist in a system
  • Adaptec ANA-62022 | User Guide - Page 61
    NICs User's Guide To configure the ports in Windows NT 4.0, follow these steps: 1 In the Adaptec New Hardware Found window, make sure all the DuraLAN NIC ports appear. Note: Generally, PCI Bus 0 is the PCI Bus on the motherboard. For example, PCI Bus 1 or above is an ANA-62022 or ANA-62044 NIC
  • Adaptec ANA-62022 | User Guide - Page 62
    . Creating Port Aggregation or FEC Groups in Windows 2000/XP To create Port Aggregation or FEC groups in Windows 2000 and Windows XP, both with GUI, follow these steps: 1 From the Start menu, point to Settings, and click Control Panel. 2 In the Control Panel, double-click the Adaptec Duralink icon
  • Adaptec ANA-62022 | User Guide - Page 63
    DuraLAN Fast Ethernet NICs User's Guide 3 In the Group(s) field, click Create New Group, and 5 From the Available Adaptec Ports box, select the available port you want to add to the group, and click Add. 6 Repeat Step 5 for each additional port. Note: We recommend that all ports in the same group be
  • Adaptec ANA-62022 | User Guide - Page 64
    system assigns a default group name (GroupX). . 2 In the Link Aggregation Type field, click the appropriate link type. For a brief description of Adaptec's Port Aggregation, see Duralink64 Port Aggregation on page 1-9; for Cisco's FEC, see FEC (Fast EtherChannel) on page 1-10. 3 From the Available
  • Adaptec ANA-62022 | User Guide - Page 65
    DuraLAN Fast Ethernet NICs User's Guide 4 Repeat Step 3 for each additional port. Note: We recommend that the same connection type be assigned to each port in the same group. 5 OPTIONAL. To remove a port from the group, click the appropriate port from the Group Ports box, and click Remove. 6 When
  • Adaptec ANA-62022 | User Guide - Page 66
    Control Panel, double click the Adaptec DuraLink icon. 4 On the Duralink64 GUI, select the Status tab. 5 Select the appropriate Group. The primary port will have a [P] next to it. To identify the primary Local Area Connection port, look under Port Name (all network settings will be taken from this
  • Adaptec ANA-62022 | User Guide - Page 67
    DuraLAN Fast Ethernet NICs User's Guide 10 The Local Area Connection 2 Properties screen appears. 11 Check the box for Internet Protocol (TCP/IP). 12 Click Properties. The Internet Protocol (TCP/IP) Properties screen appears. 4-18
  • Adaptec ANA-62022 | User Guide - Page 68
    . If your LAN system does not automatically assign IP addresses, you can manually assign the TCP/IP address and Subnet mask. - Use the following DNS preferred and alternate addresses. 14 To assign an IP address to the next Adaptec NIC port, repeat Steps 3 through 8. 15 Click OK. This takes you back
  • Adaptec ANA-62022 | User Guide - Page 69
    tab. 2 From the Adapter drop-down list, select Adaptec DuraLAN NIC. 3 In the IP Address field, type the IP address. 4 In the Subnet Mask field, type the subnet mask number. You will be prompted to assign a different IP address for each port or group of ports. After all ports have been assigned an
  • Adaptec ANA-62022 | User Guide - Page 70
    Duralink64 Configurations for Windows Modifying Groups This section provides instructions for modifying the group or port configurations. You may rename groups as well as add or remove ports from existing groups. Renaming Groups in Windows 2000/XP To rename a group in Windows 2000/XP, follow these
  • Adaptec ANA-62022 | User Guide - Page 71
    DuraLAN Fast Ethernet NICs User's Guide 2 From the Group(s) field, select the appropriate group, and type the new name. 3 Click Apply. Adding or Removing Ports in Windows 2000/XP Note: If you add or remove a port to or from a group, any existing group or port IP address is removed automatically.
  • Adaptec ANA-62022 | User Guide - Page 72
    Windows - To remove ports from the group, select the appropriate port from the Group Ports box, and click Remove. 3 Repeat Step 2 for each appropriate port. 4 To save changes 7 When adding or removing a group or port, you will receive a message such as the ones shown below. Click OK. This message
  • Adaptec ANA-62022 | User Guide - Page 73
    NICs User's Guide Checking System Status in Windows 2000/XP To view group and independent port status, follow these steps. See Field Descriptions on page 4-25 for details. 1 From the Start menu, point to Settings, and click Control Panel. 2 In the Control Panel, double-click Adaptec Duralink icon
  • Adaptec ANA-62022 | User Guide - Page 74
    Duralink64 Configurations for Windows Understanding the Status Tab in Windows 2000/XP a b c de f g h Field Descriptions a Model Adaptec DuraLAN NIC model number. b Port Name Local area connection assigned by the system. c Trans Kbps Total kilobits per second (Kilobits/sec) transmitted
  • Adaptec ANA-62022 | User Guide - Page 75
    DuraLAN Fast Ethernet NICs User's Guide Viewing the Groups You can view the Groups list in two ways: s Clicking a plus sign [+] next to port group will display the individual ports within a specific group. s Clicking a minus sign [-] next to port group will hide the individual ports within a
  • Adaptec ANA-62022 | User Guide - Page 76
    point to Settings, and click Control Panel. 2 In the Control Panel, double-click Network. 3 In the Network window, click the Adapters tab. 4 In the Adapters tab, select and double-click Adaptec DuraLAN NIC. The Duralink64 Port Aggregation window appears. 5 Click the Status tab to view the group and
  • Adaptec ANA-62022 | User Guide - Page 77
    NICs User's Guide Understanding the Status Tab in Windows NT 4.0 a b c de fg h Field Descriptions a Model Adaptec DuraLAN NIC model number. b Port No. Port identification assigned by the system. c Trans Kbps Total kilobits per second (Kilobits/sec) transmitted per port (standalone and
  • Adaptec ANA-62022 | User Guide - Page 78
    with a red X, such as ADPTSF5 shown below: or [FEC] Windows NT/2000/XP Performance Monitor You can view system traffic for selected groups and standalone ports in the Performance Monitor, as shown in the following figure. In this window, each line represents the performance of the group or
  • Adaptec ANA-62022 | User Guide - Page 79
    DuraLAN Fast Ethernet NICs User's Guide Performance Monitor example below is for Windows NT 4.0 only. Add Counter 2 are similar). Note: In Windows 2000 and Windows XP, the Failover, Port Aggregation, and FEC groups of ports will appear as a single port. 3 From the Object list box, select ADPTSF. 4-30
  • Adaptec ANA-62022 | User Guide - Page 80
    groups in the Performance Monitor, adjust the following parameters: - Color-is preset by the program for each selected group or port. You can set a specific color from the Color list box. - Scale-can be adjusted. You can set the scale of the plot for better viewing. -
  • Adaptec ANA-62022 | User Guide - Page 81
    5-5 Installing the Duralink64 Driver during NetWare 4.x OS Installation (Not supported) 5-6 Installing the NetWare Driver after OS Installation 5-6 Installing the NetWare Port Aggregation and Failover Drivers 5-7 Configuring the Ports 5-7 Creating the Failover Pair, Port Aggregation or FEC
  • Adaptec ANA-62022 | User Guide - Page 82
    installed properly in the server; see Chapter 2, DuraLAN NIC Installation on page 2-1. s Check your system for installed Adaptec DuraLAN NIC drivers. If a Duralink64 Standalone driver, Duralink64 Failover driver, or Duralink64 Port Aggregation driver exists, it must be removed. For information about
  • Adaptec ANA-62022 | User Guide - Page 83
    IHV Web site for the latest updates. Refer to the Novell user's manual for HotPlug modules and support. HotPlug Support in SA Mode In SA mode, using Novell Configuration Manager Console (ncmcon.nlm), follow the GUI onscreen options to HotPlug/ HotReplace Adaptec's DuraLAN NICs. Either let Novell 5-3
  • Adaptec ANA-62022 | User Guide - Page 84
    unload adptsf (which will unload all drivers and groups for the mode you've selected). 3 Launch the ncmcon.nlm HotPlug support module. 4 Select the Adaptec DuraLAN NIC to HotPlug or HotReplace, and follow the onscreen GUI instructions. 5 Insert the new Adaptec DuraLAN NIC in the same PCI slot as
  • Adaptec ANA-62022 | User Guide - Page 85
    during the installation of NetWare 6.0/5.x. Install NetWare following the NetWare on-screen instructions until you reach the Network Boards screen. Note: If you are using the ANA-62011LV, ANA-64022LV, or ANA-64044LV NIC with NetWare 5.1, you must use the driver that came with the NIC. Do not use the
  • Adaptec ANA-62022 | User Guide - Page 86
    DuraLAN Fast Ethernet NICs User's Guide 5 Press Insert, then press Insert again. 6 Press F3. The Specify a Directory Path window appears. 7 Insert the floppy disk you created in Step 1 (with the Duralink64 drivers) into the floppy disk drive of the NetWare server, and press Enter. 8 Type a:\nwserver
  • Adaptec ANA-62022 | User Guide - Page 87
    at the end of the file: set minimum packet receive buffers = 2000 set maximum packet receive buffers = 10000 To install the Failover or Port Aggregation driver for NetWare, follow these steps: 1 Insert the Duralink64 NetWare CD into the CD-ROM. 2 Mount the CD-ROM, refer to NetWare documentation (as
  • Adaptec ANA-62022 | User Guide - Page 88
    DuraLAN Fast Ethernet NICs User's Guide 2 In the Ports screen, make sure you know which port names are assigned to the actual ports on the NIC. The port names (Adptsf1, Adptsf2, and so on) do not correspond to the physical PCI slot numbers on the motherboard. 3 OPTIONAL. The Autodetected (Default)
  • Adaptec ANA-62022 | User Guide - Page 89
    Duralink64 Drivers for NetWare Creating the Failover Pair, Port Aggregation or FEC Groups The Failover pair consists of only two ports: the primary port and the backup port. FEC supports either two or four ports. One, three, or more than four ports are not supported. After configuring ports, you may
  • Adaptec ANA-62022 | User Guide - Page 90
    DuraLAN Fast Ethernet NICs User's Guide ports. Note: The IPX protocol supports all four frame types and multiple-frame types simultaneously. IP protocol supports select the frame type, and press Enter. b In the IPX Network Number box, type the network number, and press Enter. c Repeat Steps 4a and 4b
  • Adaptec ANA-62022 | User Guide - Page 91
    Duralink64 Drivers for NetWare 5 To assign an IP protocol, follow these steps: a In press Enter. f Press Esc. g Repeat Steps a through f for each appropriate port or pair. h Press Esc until you return to the List of Ports/Failover Pairs box. 6 Repeat Steps 1 through 5 for any other Groups you wish
  • Adaptec ANA-62022 | User Guide - Page 92
    DuraLAN Fast Ethernet NICs User's Guide When the preceding selection is executed, the following display appears listing the protocols available in this example configuration. Saving the Configuration Once you have established and verified all port and group configurations in configsf, you are ready
  • Adaptec ANA-62022 | User Guide - Page 93
    Duralink64 Drivers for NetWare screen. This program opens automatically whenever you restart the server. To manually enter the Status screen, at the system prompt type: load status System Status Data s Adaptec NIC model number. s Total Kilobits/sec transmitted per port (Standalone and Group). Total
  • Adaptec ANA-62022 | User Guide - Page 94
    DuraLAN Fast Ethernet NICs User's Guide Setting Time Intervals By default, the System Status screen refreshes every second. You may change the time interval using F8. Verifying Configuration You should verify the current port configurations before saving them to the server. To verify the
  • Adaptec ANA-62022 | User Guide - Page 95
    an Adaptec DuraLAN NIC. To modify driver configurations, follow these steps: 1 At the system console prompt, type load configsf, and press Enter. 2 Once you have opened configsf, refer to Configuring the Ports on page 5-7 for more instructions. Removing or Uninstalling Drivers If a new driver must
  • Adaptec ANA-62022 | User Guide - Page 96
    . Please note that DuraLAN products do not support 16-bit drivers. 1 Download the latest version of Novell NetWare Client32 via the Novell Web site, www.novell.com. 2 Start DOS. 3 Insert your Novell NetWare Client32 package. 4 Type install, then press Enter. 5 Follow the instructions on your screen
  • Adaptec ANA-62022 | User Guide - Page 97
    . Do not choose Adaptec PCI Ethernet Driver Failover. Insert the Duralink64 driver for NetWare (CD), and type a:\nwserver. Select Adaptec DuraLAN Network Adapters. Set IOMAP to 1. Set Connection Type to Autodetect Default or None. Editing startnet.bat To assign multiple ports, follow these steps
  • Adaptec ANA-62022 | User Guide - Page 98
    that Adaptec does not support 16-bit drivers. Note: This procedure requires the NDIS driver with Client32. Do not use an ODI driver. 1 If you are using Windows NT 4.0, install the latest Microsoft service packs that are available for the Windows OS. Then restart the system. 2 Install the DuraLAN
  • Adaptec ANA-62022 | User Guide - Page 99
    DuraLAN Fast Ethernet NICs User's Guide Connecting Clients to the NetWare SA, FO, PA, or FEC Double-click hkey_local_machine. c Double-click System. d Double-click CurrentControlSet. e Double-click Services. f Double-click NetWare Workstation. g Double-click Parameters. h Double-click Retry Count to
  • Adaptec ANA-62022 | User Guide - Page 100
    on page 1-3. s Verify that the new Adaptec DuraLAN NIC(s) have been installed properly in the server; see Chapter 2, DuraLAN NIC Installation on page 2-1. s Check your system for installed Adaptec DuraLAN NIC drivers. If a Duralink64 Standalone (Standard) driver exists, it must be removed. For
  • Adaptec ANA-62022 | User Guide - Page 101
    the prompt, type pkgadd -d /mnt/uw7x/duralan.pkg and press Enter to add the package (driver). 6 Run netcfg to open the Network Configuration Manager window. 7 Go to the Hardware menu. 8 Select Add new LAN adapter. 9 Select Ethernet-Adaptec DuraLAN NIC Driver, then select Continue. 10 Select Advanced
  • Adaptec ANA-62022 | User Guide - Page 102
    Duralink64 Standalone Driver for UnixWare 15 Repeat Steps 8 through 14 for additional LAN configurations. 16 To exit, click Hardware, then select Exit. Assigning the Protocols To assign IP or IPX protocols to standalone ports, follow these steps: Note: The IPX protocol supports all four frame types
  • Adaptec ANA-62022 | User Guide - Page 103
    DuraLAN Fast Ethernet NICs User's Guide Restarting the Server After installing the Standalone driver and configuring the ports, you must restart the server. If loading only TCP/IP, a reboot is not required. To restart the server, follow these steps: 1 Login as root, and
  • Adaptec ANA-62022 | User Guide - Page 104
    exhaustive explanation of connecting Ethernet networks but will provide some useful information on cabling suitable for Adaptec DuraLAN NICs. The following table outlines the two cable specifications of IEEE 802.3u: 100BaseTX and 100BaseFX. Cable supported
  • Adaptec ANA-62022 | User Guide - Page 105
    Duplex Support To implement Full Duplex on your network, you need both an NIC and a switch that supports Full Duplex. Full Duplex support instructions in this User's Guide describe how to enable Full Duplex. Additional information can be found in the readme.txt files. Adaptec PCI TX NICs support
  • Adaptec ANA-62022 | User Guide - Page 106
    for Adaptec DuraLAN NICs vary according to network speed, cabling standard, and the connector to be used. The table below identifies appropriate cabling, based on these variables. The table applies to both Half Duplex and Full Duplex (for selected models) environments. NIC TX Adapters Connector
  • Adaptec ANA-62022 | User Guide - Page 107
    DuraLAN Fast Ethernet NICs User's Guide Pin-out and Color Requirements Straight-through Cable - 10BaseT or 100BaseTX Pin Colors - Both Ends 1 Orange/White 2 Orange 3 Green/White 4 Blue 5 Blue/White 6 Green 7 Brown/
  • Adaptec ANA-62022 | User Guide - Page 108
    ls, p1 ls, p2 Speed100, p2 act, p2 Speed10, p2 act, p3 act, p4 ls, p3 ls, p4 ANA-6x022 ANA-6x044 act = network activity, p = port, ls = link status LED Functions For ANA-6x011, and ANA-6x022: s Speed100 The Speed100 LED is green. When on, it indicates that a valid 100 Megabits/sec link has
  • Adaptec ANA-62022 | User Guide - Page 109
    DuraLAN Fast Ethernet NICs User's Guide s act The act LED is amber. The act LED lights up to signal the presence of incoming or outgoing traffic. For ANA-6x044: s ls When on and green, it indicates that a valid 100 Megabits/sec link has been made. When on and amber, it indicates that a valid
  • Adaptec ANA-62022 | User Guide - Page 110
    Tips This appendix explains how to troubleshoot problems with your DuraLAN NIC. If your NIC is not functioning properly, first make sure that it was set up according to the instructions in this User's Guide. s Verify that your NIC is installed properly and configured correctly; see Chapter
  • Adaptec ANA-62022 | User Guide - Page 111
    - There are problems with the cables or connectors Troubleshooting Use the following table to help answer common questions. For more information on FAQs, see the www.adaptec.com support site. Symptom Solution Adaptec NIC is conflicting with an installed PCI SCSI Adapter Workstations cannot
  • Adaptec ANA-62022 | User Guide - Page 112
    Troubleshooting Tips Symptom (Continued) Solution Driver fails to load or fails to recognize the DuraLAN NIC Check the BIOS settings. Sometimes the bus master is disabled by default; if this is the case, enable the bus master. Persistent problems with an adapter configure the Adaptec PCI NICs
  • Adaptec ANA-62022 | User Guide - Page 113
    Duralink64 standard drivers, Port Aggregation, and Failover. This software is supported by Adaptec's DuraLAN 32-bit and 64-bit NICs. Duralink64 Port Aggregation software makes it possible to aggregate the outbound bandwidth of 2 to 12 Fast Ethernet ports into one virtual network interface for
  • Adaptec ANA-62022 | User Guide - Page 114
    Windows NT, and Windows 2000) that support routing. s What is the difference between the Duralink64 v4.2 or 5.0 and Duralink v3.0 software? Duralink64 v4.2 and v5.0 are the software drivers written for Adaptec's DuraLAN ASIC (used on the ANA-6x011/TX, ANA-6x022, and ANA-6x044). Duralink v3.0 is the
  • Adaptec ANA-62022 | User Guide - Page 115
    software only works with Adaptec DuraLAN NICs but is fully interoperable with network devices (such as switches and hubs) from other vendors. s Does Duralink64 Failover work with a switch or a hub? Duralink64 Failover works with any switch or any hub. s How many ports can I configure for the
  • Adaptec ANA-62022 | User Guide - Page 116
    you can install the Duralink64 Failover drivers. Duralink64 v5.x Port Aggregation Software Questions s What is Duralink64 Port Aggregation software? Adaptec's Duralink64 Port Aggregation technology builds upon standards-based Fast Ethernet to provide network managers a reliable high-speed solution
  • Adaptec ANA-62022 | User Guide - Page 117
    is reassigned back to the primary port. s What NICs support Duralink64 Port Aggregation? Adaptec's ANA-6x011/TX, ANA-6x022, and ANA-6x044 NICs support Duralink64 Port Aggregation. s Which network switches support Duralink64 Port Aggregation? Duralink64 Port Aggregation has been tested with all
  • Adaptec ANA-62022 | User Guide - Page 118
    Duralink64 Port Aggregation support Cisco's FEC? Yes. s Where can I learn more about Duralink64 Port Aggregation? Go to the Adaptec Web site at: http://www.adaptec.com. Duralink64 v5.x Windows NT - General Questions s Which service pack has been tested with DuraLAN and Duralink Failover 4.0 drivers
  • Adaptec ANA-62022 | User Guide - Page 119
    DuraLAN Fast Ethernet NICs User's Guide s How can I determine the status of a Failover group under Windows NT? You can view the status of any Failover group using the status screen (Control Panel, Network Adapters, Status tab). s Do the Duralink64 v5.x Failover drivers support AppleTalk under
  • Adaptec ANA-62022 | User Guide - Page 120
    failover configuration. s Does Duralink64 v5.x support Novell's 32-bit client for Windows 98, Windows 2000, or Windows NT? Yes. However, connecting clients to the NetWare Duralink64 server requires the NDIS driver. Do not use an ODI driver. See the User's Guide Windows 98, Windows 2000, or Windows
  • Adaptec ANA-62022 | User Guide - Page 121
    network management station with SNMP (version 1) support. The following information is provided: s Information group-containing card, port information table-describing each Adaptec network card on the system. s Card port information table-sorted by network card listing all ports and the interface to
  • Adaptec ANA-62022 | User Guide - Page 122
    Service using the Windows NT CD, then reinstall SP3. The driver installation enables an SNMP agent to provide management information to the SNMP management station. The agent supports both the DuraLAN the DuraLAN network adapter. Note: Duralink64 software does not support SNMP for Windows 2000 or
  • Adaptec ANA-62022 | User Guide - Page 123
    D The Diagnostics Utility Your Adaptec DuraLAN NIC is supplied with a DOS Diagnostics utility that is found on the LAN and Duralink64 Failover Drivers NetWare CD. Use the Diagnostics utility to check the functionality of your DuraLAN NICs. Running the Diagnostics From the Hard Disk Drive To run the
  • Adaptec ANA-62022 | User Guide - Page 124
    DuraLAN Fast Ethernet NICs User's Guide From the CD-ROM Drive To prepare a DOS diagnostics boot disk, be run on the Adaptec DuraLAN Fast Ethernet NIC(s). The diagnostics commands are case sensitive and must be typed exactly as they appear in the table. Command selftest port X display loop EEPROM
  • Adaptec ANA-62022 | User Guide - Page 125
    The Diagnostics Utility Command hbi_slave hbi_dma mac address_filter internal_10_mac internal_100_mac internal_10_phy internal_100_phy external_10 external_100 autonegotiate (speed is one of five options) checksum statistics Test Tests slave accesses, checks serial EEPROM, and checks
  • Adaptec ANA-62022 | User Guide - Page 126
    DuraLAN Fast Ethernet NICs User's Guide Command echoer #/sender # (where # is the number of packets to send) pause mem (default) io timer powermanagement mod (mac offset data) help or ? Test This test requires two computers on a private network: one as the sender, and the other as the echoer. This
  • Adaptec ANA-62022 | User Guide - Page 127
    Index A adding or removing ports 4-22 ANA-6x044 1-13 AppleTalk compatibility B-5, B-10 architecture 1-2 assigning TCP/IP address Windows 2000 4-16 Windows NT 4.0 4-19 B bandwidth 1-5, B-7 BIOS setup B-3 C cable specification 100BaseFX A-1 100BaseTX A-1 cables 100BaseTX A-3
  • Adaptec ANA-62022 | User Guide - Page 128
    User's Guide driver configuration Novell Client for Windows 6-3 UnixWare 7.x 7-2 Windows OSs 4-4 driver configurations 1-8 NetWare OSs 5-5 UnixWare OSs 7-2 drivers conditions for removal B-7 modifying 5-15 removing 3-10, 3-12 requirements (OS specific) 5-5 Standard B-4 DuraLAN driver installation
  • Adaptec ANA-62022 | User Guide - Page 129
    installation DuraLAN NIC 2-2 Duralink64 5.2 driver 3-2 Duralink64 driver ports 3-2 tips 3-10 IP/IPX (Internet Packet EXchange) protocols 5-10, 7-3 IPX, compatible protocol B-5, B-6 IRQ (Interrupt Request) 1-3 L LEDs See diagnostic LEDs legacy Adaptec DEC-based NIC compatibility B-5 Linux support
  • Adaptec ANA-62022 | User Guide - Page 130
    's Guide dual hubs 1-15 dual hubs with 4-port NIC 1-17 dual hubs with routers 1-16 dual hubs with switch 1-16 examples 1-11 Windows NT utility 4-21 NIC drivers DuraLAN FEC driver 1-8 DuraLAN standard driver 1-8 Duralink64 Failover 1-8 Duralink64 Port Aggregation 1- 8 NIC models 1-4 NICs (network
  • Adaptec ANA-62022 | User Guide - Page 131
    1-9 TSID Number See Technical Support Identification Number U uninstalling drivers 5-15, 7-4 utilities, diagnostics D-1 V verifying ports 5-14 viewing configuration 7-3 configuration screen 5-14 system status 5-12 VLANs (Virtual Local Area Networks), support B-9 voltage support 1-4 W Windows 2000
  • Adaptec ANA-62022 | User Guide - Page 132
    DuraLAN Fast Ethernet NICs User's Guide 8 Windows NT performance monitor 4-29 server clustering 1-12 Windows NT 4.0 Duralink64 driver installation 37 Windows XP 3-6 Index-6
  • Adaptec ANA-62022 | User Guide - Page 133
    R Adaptec, Inc. 691 South Milpitas Boulevard Milpitas, CA 95035 © 2002 Adaptec, Inc. All rights reserved. Adaptec, and the Adaptec logo are trademarks of Adaptec, Inc. which may be registered in some jurisdictions. PART NUMBER: 512872-06, Ver. AA DR 8/02
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
R
DuraLAN
™
Fast Ethernet NICs
with Duralink64
™
Software
ANA
™
-62000/64000 Family
User’s Guide