Adaptec 2126900-R Hardware Installation Guide

Adaptec 2126900-R - 2PORT USB 2.0 Pci Card Manual

Adaptec 2126900-R manual content summary:

  • Adaptec 2126900-R | Hardware Installation Guide - Page 1
    R HARDWARE INSTALLATION GUIDE AUA-3100LP/AUA-5100 USB2CONNECT ADAPTER
  • Adaptec 2126900-R | Hardware Installation Guide - Page 2
    The Adaptec USB2connect Adapters (AUA-3100LP and AUA-5100) are Universal Serial Bus (USB) host adapters for PC-compatible or Macintosh computers Refer to the Readme file on the CD for operating system support. The USB2connect 3100LP adapter is shown below: External Connectors Internal Connector
  • Adaptec 2126900-R | Hardware Installation Guide - Page 3
    USB2connect card into your computer. NOTE For information on installing the drivers for the USB2connect, see the User's Guide located on the computer and unplug the power cord, open the computer cabinet. NOTE See your computer documentation for specific instructions on opening your computer cabinet
  • Adaptec 2126900-R | Hardware Installation Guide - Page 4
    force to insert the card completely. Note: This figure shows the AUA3100LP card. The 5100 fits in the slot the same way. STEP 6 Close the computer cabinet and reattach the power cord. 3
  • Adaptec 2126900-R | Hardware Installation Guide - Page 5
    . See the User's Guide on your USB2connect CD for more information. Macintosh® Installation STEP 1 STEP 2 Power up the computer. Insert the USB2connect CD into your Macintosh CD-ROM drive. Double-click the Start Installation Here file. STEP 3 STEP 4 STEP 5 Follow the instructions to install the
  • Adaptec 2126900-R | Hardware Installation Guide - Page 6
    be attached and recognized even when the computer is powered ON. • Some peripheral manufacturers support hot-plugging in different ways. See instructions for each device to determine the best way to attach and mount the peripheral. • Check http://www.adaptec.com for the latest driver avail- ability
  • Adaptec 2126900-R | Hardware Installation Guide - Page 7
    prob- lems loading the drivers on your Windows 2000 operating system. • Check the Troubleshooting section of your operating system user's guide. • Check the User's Guide and Readme file on the CD if you encounter any problems with the software. • If the driver fails to load, move the card to
  • Adaptec 2126900-R | Hardware Installation Guide - Page 8
    still unable to resolve a problem, see the Adaptec Web site at http://www.adaptec.com or the Adaptec Support Knowledgebase at http://ask.adaptec.com for additional troubleshooting information. You can also find more detailed installation instructions in the User's Guide located on the USB2connector
  • Adaptec 2126900-R | Hardware Installation Guide - Page 9
    are trademarks of Adaptec, Inc., which may be registered in some jurisdictions. Windows 98, Windows 2000, and Windows Me are trademarks of Microsoft Corporation in the U.S. and other countries, used under license. Macintosh and Power Macintosh are registered trademarks of Apple Computer, used under
  • Adaptec 2126900-R | Hardware Installation Guide - Page 10
    . To expedite your service, have your computer in front of you. I To order Adaptec products, including software and cables, call +1 800-442-7274 or +1 408-957-7274. Europe I Visit our Web site at http://www.adaptec-europe.com. I English and French: To speak with a Technical Support Specialist, call
  • Adaptec 2126900-R | Hardware Installation Guide - Page 11
    expedite your service, have your computer in front of you. Hong Kong and China I Visit our Web site at http://www.adaptec.com. I To speak with a Technical Support Specialist, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
  • Adaptec 2126900-R | Hardware Installation Guide - Page 12
    is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take corrective action. R © 2001 Adaptec, Inc. All rights reserved. P/N: 512879-06, Ver. AA KM 05/01 11
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

R
H
ARDWARE
I
NSTALLATION
G
UIDE
AUA-3100LP/AUA-5100
USB2
CONNECT
A
DAPTER