Adaptec 2120S Installation Guide
Adaptec 2120S - SCSI RAID Controller Manual
 |
UPC - 760884139639
View all Adaptec 2120S manuals
Add to My Manuals
Save this manual to your list of manuals |
Adaptec 2120S manual content summary:
- Adaptec 2120S | Installation Guide - Page 1
R INSTALLATION GUIDE ADAPTEC SCSI CARD 19160 ULTRA160 SCSI CONTROLLER - Adaptec 2120S | Installation Guide - Page 2
- Adaptec 2120S | Installation Guide - Page 3
Adaptec SCSI Card 19160 INTRODUCTION The Adaptec SCSI Card 19160 Ultra160 SCSI controller enables you to connect up to 15 SCSI devices-such as hard disk drives, scanners, and CD-ROM drives-to any Intel-based computer with 32-bit PCI expansion slots. You can connect newer LVD SCSI devices, such as - Adaptec 2120S | Installation Guide - Page 4
™ technology. SpeedFlex technology ensures that you get the best performance from your LVD SCSI devices by electronically isolating the LVD/SE segment from the SE segment on the SCSI bus. This allows the Adaptec SCSI Card 19160 to support LVD SCSI devices at speeds up to 160 MBytes/sec on the - Adaptec 2120S | Installation Guide - Page 5
Adaptec SCSI Card 19160 INSTALLING THE ADAPTEC SCSI CARD 19160 STEP 1 Discharge any static electricity build-up before handling the SCSI card by touching a grounded metal object (like the exposed metal parts on the back of your computer). WARNING Turn OFF power to the computer and disconnect the - Adaptec 2120S | Installation Guide - Page 6
Installation Guide STEP 4 Computers may have vertical or horizontal expansion slots. Refer to your computer manual to locate the PCI slots. If your computer is a tower model, lay it on its side to make it easier to install the Adaptec SCSI Card 19160. Insert the Adaptec SCSI Card 19160 into the - Adaptec 2120S | Installation Guide - Page 7
device to device, always refer to the device's documentation for specific instructions. Below are some guidelines for checking SCSI IDs, setting termination, and mounting devices in your computer. Refer to the Adaptec SCSI Card 19160 User's Reference for more information on these topics. Check the - Adaptec 2120S | Installation Guide - Page 8
end of the cable. NOTE External LVD devices are not supported by the Adaptec SCSI Card 19160. Terminating Fast/Ultra SCSI Devices On most internal Fast/Ultra SCSI devices, the termination setting is controlled by setting a jumper or a switch, or by physically removing or installing a resistor module - Adaptec 2120S | Installation Guide - Page 9
Adaptec SCSI Card 19160 CONNECTING SCSI DEVICES You can connect up to 15 SCSI devices to the Adaptec SCSI Card 19160. Before connecting devices, be sure to review Setting Up SCSI Devices on page 5. For additional details on connecting devices, refer to the Adaptec SCSI Card 19160 User's Reference. - Adaptec 2120S | Installation Guide - Page 10
Installation Guide STEP 2 Plug the nonterminated end of the cable to the internal LVD/SE connector. 68-pin Internal LVD SCSI Cable 68-pin Internal LVD/SE Connector STEP 3 Plug the internal LVD SCSI devices to the other cable connectors, starting with the connector at the terminated end of the - Adaptec 2120S | Installation Guide - Page 11
Adaptec SCSI Card 19160 STEP 4 Connect a power cable from your computer's internal power supply to each internal SCSI device. Power Cable (From the Power Supply Inside the Computer) Power Input Connector on the Back of the Device STEP 1 Connecting Internal Fast/Ultra SCSI Devices Connect - Adaptec 2120S | Installation Guide - Page 12
Installation Guide J STEP 2 Plug one end of the cable to the 50-pin internal Fast/Ultra-SE SCSI connector on the Adaptec SCSI Card 19160. 50-pin Internal Narrow SCSI Connector 50-pin Internal Ultra Narrow SCSI Cable STEP 3 Plug the other end of the cable to a terminated Fast/Ultra SCSI device. - Adaptec 2120S | Installation Guide - Page 13
Adaptec SCSI Card 19160 STEP 5 Connect a power cable from your computer's internal power supply to each internal device. Power Cable (From the Power Supply Inside the Computer) Power Input Connector on the Back of the Device STEP 1 Connecting External Fast/Ultra SCSI Devices Connect external - Adaptec 2120S | Installation Guide - Page 14
Installation Guide STEP 2 Connect the other end of the external SCSI cable to a SCSI connector on the back of an external SCSI device. SCSI Terminator 4 4 STEP 3 If you are installing only one external device, STEP 4 Connect power cables to all external devices and to the computer. 12 - Adaptec 2120S | Installation Guide - Page 15
driver support for the Adaptec SCSI Card 19160. To determine if the card is supported by the operating system you are using, read the operating system manual or contact the operating system vendor for information. TROUBLESHOOTING If you have any problems while installing the Adaptec SCSI Card - Adaptec 2120S | Installation Guide - Page 16
- Adaptec 2120S | Installation Guide - Page 17
Adaptec, the Adaptec logo, and SpeedFlex are registered trademarks of Adaptec, Inc., which may be registered in some jurisdictions. Windows, Windows 98, and Windows if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, - Adaptec 2120S | Installation Guide - Page 18
must accept any interference received, including interference that may cause undesired operation. Adaptec, Inc. Adaptec SCSI Card 19160 Tested to Comply With FCC Standards FOR HOME OR OFFICE USE B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada. Japanese Compliance 16 - Adaptec 2120S | Installation Guide - Page 19
- Adaptec 2120S | Installation Guide - Page 20
R We move the information that moves your world.™ © 1999 Adaptec, Inc. All rights reserved. Printed in Singapore Stock No.: 512507-03, Rev. A RQ 12/99 (SRC: 512507-00, Ver. AA)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
R
I
NSTALLATION
G
UIDE
A
DAPTEC
SCSI C
ARD
19160
U
LTRA
160 SCSI C
ONTROLLER