Acer PREDATOR X25 Quick Start Guide

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1.

To clean the LCD monitor screen:

•

Turn off the LCD monitor and unplug the power cord.

•

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2.

Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3.

Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4.

Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5.

Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6.

Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

•

Monitor-to-PC signal cable is frayed or damaged.

•

Liquid spills onto the LCD monitor or the monitor is exposed to rain.

•

The LCD monitor or case is damaged.

Attaching the monitor to the base

1.

Remove the monitor from the packaging.

2.

Attach the footstand to the base. (for selected models).

3.

Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4.

Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1.

Turn off your computer and unplug your computer's power cord.

2.

Connect the signal cable to the DP (optional) and/or HDMI (optional) input socket of the monitor, and the

DP(optional) and/or HDMI (optional) output socket of the graphics card on the computer.

3.

Connect the USB Cable(Optional)

Connect the USB cable to port for fast charge.

Connect the USB cable to port.

4.

Insert the monitor power cable into the power port at the back of the monitor.

5.

Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.

Note: Audio output is only for audio output model. Please check user

manual for more instruction.

DP

USB

DP

HDMI 1(2.0)

HDMI 2(2.0)

Reflex Latency Analyzer

G-SYNC :

G-SYNC requires an NVIDIA GeForce GTX 1070 BOOST GPU or higher. For more information, visit the nVidia

®

website: