Acer AW2000h-AW175h F1 Acer AW2000h-AW17xhx Service Guide - Page 9
Removal and replacement procedures
View all Acer AW2000h-AW175h F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Chapter 2 Removal and replacement procedures Required tools You need the following items for some procedures: • T-10/T-15 Torx screwdriver (included with the server) Preparation procedures To access some components and perform certain service procedures, you must perform one or more of the following procedures: • Extend the server from the rack If you are performing service procedures in an Acer branded, telco, or third-party rack cabinet, you can use the locking feature of the rack rails to support the server and gain access to internal components. For more information about telco rack solutions, refer to the RackSolutions.com website • Power down the server If you must remove a server from a rack or a non-hot-plug component from a server, power down the server. • Remove the server from the rack If the rack environment, cabling configuration, or the server location in the rack creates awkward conditions, remove the server from the rack. • Access the product rear panel If you are performing certain service procedures, access the product rear panel. Chapter 2 3