Acer AW2000h-AW175h F1 Acer AW2000h-AW17xhx Service Guide - Page 44

PCI Express card removal and installation Your server has two preinstalled riser cards designed specifically for use in the 1U rackmount chassis. These riser cards allow two low-profile PCI Express x16 cards to fit inside the chassis. Installing a PCI Express card 1. Remove the server node. See steps 1 and 2 of "Replacing a server node" on page 37. 2. Open the locking tab (1) on the PCI slot shield. 3. Remove the PCI slot shield (2). 4. Insert the card into the selected slot (3). Make sure that the card is properly seated. NOTE: Remove the expansion card from its protective packaging, handling it by the edges. 5. Secure the card with the locking tab (4). 6. Connect the appropriate cables to the card. 38 Chapter 7