Acer AM501 AM501 Monitor Service Guide - Page 18
Internal connectors, Power Requirements
![]() |
View all Acer AM501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4.8 Internal connectors All internal connectors for the interconnection of sub assemblies must be distinct in their physical characteristics or polarization so as to prevent any misconnection which may cause permanent damage to the display. 4.9 Power Requirements The display device shall maintain the specified performances in the range described below: Frequency: Voltage: 50/60Hz± 3Hz 90 to 264 Vac RMS The following consumption requirements shall be met: Power consumption: 75W for MPRII & VLMF Yoke 70W for NORMAL Yoke Current consumption:1.2 Aac RMS Note: Current and power consumption are the maximum values allowed in the voltage ranges describe above. 4.9.1 Power Management Table 5: Power Management NO STATE STATE POWER SAVING HORIZONTAL VERTICA VIDEO 1 ON PLUSES PLUSES ACTIVE NONE 2 STAND-BY NO PLUSES PLUSES BLANKED