AEG L61271BI Product Manual

AEG L61271BI Manual

Get AEG L61271BI PDF manuals and user guides View all AEG L61271BI manuals
Add to My Manuals
Save this manual to your list of manuals

AEG L61271BI manual content summary:

  • AEG L61271BI | Product Manual - Page 1
    LAVAMAT 61271 BI LAVAMAT 61470 BI EN User manual
  • AEG L61271BI | Product Manual - Page 2
    SAFETY INFORMATION 3 2. SAFETY INSTRUCTIONS 4 3. TECHNICAL INFORMATION 5 4. PRODUCT DESCRIPTION 6 5. CONTROL PANEL 7 6. WASHING PROGRAMMES 9 7. CONSUMPTION VALUES 12 8. FIRST USE 13 9. USING THE APPLIANCE 13 10. HELPFUL HINTS AND TIPS 17 11. CARE AND CLEANING 18 12. TROUBLESHOOTING 22 13
  • AEG L61271BI | Product Manual - Page 3
    above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Do not let children play with the appliance. • Keep all
  • AEG L61271BI | Product Manual - Page 4
    4 www.aeg.com • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in 0 °C or where it is exposed to the weather. • Obey the installation instruction supplied with the appliance. • Make sure that the floor where you install the
  • AEG L61271BI | Product Manual - Page 5
    Do not change the specification of this appliance. • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items container to collect possible water leakage under the appliance. Contact the Service to ensure which accessories can be used. 2.3 Care and Cleaning
  • AEG L61271BI | Product Manual - Page 6
    6 www.aeg.com Level of protection against ingress of solid particles (0,8 MPa) Water supply 1) Cold water Maximum load Cotton 7 kg Spin speed Maximum 1200 rpm (L 61271 BI) 1400 rpm (L 61470 BI) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 4. PRODUCT DESCRIPTION 1
  • AEG L61271BI | Product Manual - Page 7
    the removal of the transit bolts. 3 Anti-flood inlet hose To prevent possible leakage 4 Plastic hose guide To connect the drain hose on the edge of a sink. 5. CONTROL PANEL 1 2 3 4 button 9 DELAY START button 10 Indicator pilot lights: • A - Washing phase • B - Door locked • C - Extra Rinse
  • AEG L61271BI | Product Manual - Page 8
    8 www.aeg.com 5.1 Display The display shows the following information: Duration problems, some alarm codes can be displayed, for example (see chapter «Troubleshooting»). End of programme When the programme has finished, the display shows a blinking zero . The DOOR light B, the WASHING light
  • AEG L61271BI | Product Manual - Page 9
    events of operating problems). By pressing these two buttons again, the acoustic signal is reactivated. 5.4 Child safety lock This device permits you to leave the appliance unsupervised and not to worry After you have pressed the button 8, the WASHING light (A) comes on. The machine is operating
  • AEG L61271BI | Product Manual - Page 10
    Main wash Rinses Short spin Wool/Silk 40° - Cold Max. load 2 kg Machine washable wool as well as for hand washable woollens and delicate fabrics. Note: A single or bulky item may cause imbalance. If the appliance doesn't perform the final spin phase, add more items, redistribute the load manually
  • AEG L61271BI | Product Manual - Page 11
    kg White and fast coloured cotton. Normally and slightly soiled cotton items. The appliance decreases the temperature and extends the washing time to obtain a good washing efficiency so saving energy. Main wash Rinses Long spin Off For cancelling the running programme or to switch the machine off
  • AEG L61271BI | Product Manual - Page 12
    12 www.aeg.com 1) Stain option can be selected only at the temperature of 40 °C 7 1.35 Cottons 40 °C 7 0.85 Synthetics 40 °C 3 0.55 Delicates 40 °C 3 0.55 Wool/Hand wash 30 °C 2 0.25 Standard cotton programmes Standard 60 °C cotton 7 1.01 Standard 60 °C cotton 3.5 0.78 Standard 40
  • AEG L61271BI | Product Manual - Page 13
    /125/EC. 8. FIRST USE 1. To activate the drain system, put 2 litre of water in the main wash compartment of the detergent dispenser. 2. Put a small quantity of detergent in the main wash compartment of the detergent dispenser. Set and start a programme for cotton at the highest temperature without
  • AEG L61271BI | Product Manual - Page 14
    of liquid additives. Always obey the instructions that you find on the packaging of washing temperature according to the type of laundry. The pilot light of button 8 starts blinking. The programme dial can be turned either clockwise or anticlockwise. = Reset programme / switching OFF of the machine
  • AEG L61271BI | Product Manual - Page 15
    again. Set the delay before you press the button 8. You can delay the wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours the delay time the door will be locked): • Press the button 8 to put the machine in pause • Add the laundry, close the door . • Press the button 8 again
  • AEG L61271BI | Product Manual - Page 16
    aeg.com • Press the button 8 to set the washing machine to PAUSE; • Press the button 9 once until the display shows the symbol '; • Press the button 8 again to start the programme. You can change the set delay only after you set the washing drain. Follow the below instructions to empty out the water
  • AEG L61271BI | Product Manual - Page 17
    washing bag to wash small items. • A very small load can cause balance problems with the spin phase. If this occurs, adjust manually washing machines. • Do not mix different types of detergents. • To help the environment, do not use more than the correct quantity of detergent. • Obey the instructions
  • AEG L61271BI | Product Manual - Page 18
    18 www.aeg.com Water hardness table Level 1 2 3 4 Type soft medium hard very hard °dH 0-7 8-14 15-21 a water softener to remove limescales. Use a special product made for washing machines. Obey the instructions that you find on the packaging of the manufacturer. Do this separately from the
  • AEG L61271BI | Product Manual - Page 19
    does not empty and/or spin; • the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump; • a problem with water draining is detected (see chapter "Troubleshooting" for more details). WARNING! Before unscrewing the pump cover, switch the
  • AEG L61271BI | Product Manual - Page 20
    20 www.aeg.com 3. Place a container close to the pump to collect any spillage. A B 4. Release the emergency emptying hose (B), place it in the from the pump impeller. 7. Check carefully whether the pump impeller rotates (it rotates jerkily). If it doesn't rotate, please contact your Service Centre.
  • AEG L61271BI | Product Manual - Page 21
    pump by inserting it correctly into the special guides. Screw the pump cover firmly by turning . Never remove the pump cover during a wash cycle, always wait until the appliance has the display shows the related alarm. Refer to 'Troubleshooting'. WARNING! Disconnect the mains plug from the mains
  • AEG L61271BI | Product Manual - Page 22
    22 www.aeg.com 6. Install again the inlet hose. Make TROUBLESHOOTING Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below. During machine
  • AEG L61271BI | Product Manual - Page 23
    ENGLISH 23 Problem Possible cause/Solution The washing machine does not start: The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the
  • AEG L61271BI | Product Manual - Page 24
    aeg.com Problem will not open: The programme is still running. • Wait the end of washing cycle. The door lock has not been released. • Wait until the machine vibrates or is noisy: The transit bolts and packing have not been removed. • Check the correct installation of the appliance. The support
  • AEG L61271BI | Product Manual - Page 25
    spin. • The laundry load is perhaps to little, add more items, redistribute the load manually and then select the spinning programme. The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and more even
  • AEG L61271BI | Product Manual - Page 26
    26 www.aeg.com 2. Remove the cardboard top. 3. Remove the polystyrene packaging materials. 4. Remove the internal film. 5. Open the door. Remove the polystyrene piece from the door seal
  • AEG L61271BI | Product Manual - Page 27
    with the appliance. 11. Pull out the plastic spacers. 12. Put the plastic caps in the holes. You can find these caps in the user manual bag.
  • AEG L61271BI | Product Manual - Page 28
    28 www.aeg.com WARNING! Remove all the packaging and the transit bolts before you install the appliance. We recommend that you keep the packaging and the transit bolts for when you move the appliance. 13.2 Positioning and levelling • Install the machine on a flat hard floor. • Make sure that air
  • AEG L61271BI | Product Manual - Page 29
    ! Make sure that there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replacement of the inlet hose. Water pressure The appliance works correctly if the water pressure is not less than 0.05 MPa (0.5 bar
  • AEG L61271BI | Product Manual - Page 30
    .aeg.com Water-stop device A 13.4 Water drainage There are different procedures to connect the drain hose: With the plastic hose guide. the service centre to replace the hose. • On the edge of a sink. • Make sure that the plastic guide can- not move when the appliance drains. Attach the guide to
  • AEG L61271BI | Product Manual - Page 31
    is this (see the drawing), you can push it directly into the stand pipe. Without the plastic hose guide. • To a sink spigot. Refer to the illustration. Put the drain hose in the spigot and tighten drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension.
  • AEG L61271BI | Product Manual - Page 32
    32 www.aeg.com 13.5 In the interest of the environment • Connect the appliance to the FOUL system for the drain water. The sewage works keeps the drain
  • AEG L61271BI | Product Manual - Page 33
    ENGLISH 33 Preparation and assembly of the door • The machine is originally pre-arranged for the assembly of a door opening from right to left (Fig. 2). Fig. 2 16-22 mm Ø 35 mm 14 mm Fig. 3 Fig. 4 X
  • AEG L61271BI | Product Manual - Page 34
    34 www.aeg.com A B Fig. 5 A B C Fig. 6 E Fig. 7 D A C B • Mounting the door Fix the hinges to the appliance by means of the M5x15 screws . The hinges can be adjusted to
  • AEG L61271BI | Product Manual - Page 35
    ENGLISH 35
  • AEG L61271BI | Product Manual - Page 36
    www.aeg.com/shop 132927081-A-482012
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
LAVAMAT 61271 BI
LAVAMAT 61470 BI
EN
User manual