2010 Yamaha Motorsports RS Vector LTX GT Owners Manual
2010 Yamaha Motorsports RS Vector LTX GT Manual
2010 Yamaha Motorsports RS Vector LTX GT manual content summary:
- 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 1
OWNER'S MANUAL Read this manual carefully before operating this vehicle. RS90GTZ RS90LTGTZ LIT-12628-02-91 8JA-28199-10 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 2
ESU10041 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 3
sporting and touring snowmobiles. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will give you an understanding of the operation, inspection, and basic maintenance of this snowmobile. If you have any questions concerning the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 4
information ESU10151 Particularly important information is distinguished in this manual by the following notations. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 5
Contents Location of the important labels ...1 Safety information ...5 Description ...7 Control functions ...10 Main switch ...10 Throttle lever ...10 Throttle override system (T.O.R.S.) ...10 Multi-function meter unit ...11 High beam indicator light ...13 Low coolant temperature indicator light ... - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 6
Contents Troubleshooting ...74 Storage ...78 Specifications ...80 Consumer information...82 Identification number records ...82 Vehicle Emission Control Information label ...83 YAMAHA MOTOR CORPORATION, U.S.A. SNOWMOBILE LIMITED WARRANTY...84 YAMAHA EXTENDED SERVICE (Y.E.S.)...87 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 7
Location of the important labels ESU10215 Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 8
TYPE 250 cm³ (8.5 oz) GL-3 75W or 80W 3. TRACK TENSION 30 ~ 35 mm (1.18 ~ 1.38 in)/100 N (10 kg, 22 lb) * FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL. * SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. SPECIFICATIONS DE LA MISE AU POINT ENTRAÎNEMENT 1. CAPACITÉ D'HUILE DU CARTER DE CHAÎNE 250 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 9
Location of the important labels 7 8FR-77763-E0 8 RS90LTGT 9 • CMVSS ANADA • •C This spark ignition system meets all requirements of the Canadian Interference Causing Equipment Regulations. Ce syst è me d ' allumage par é tincelle de vé hicule respecte toutes les exigences du R è glement sur le - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 10
Location of the important labels 11 8FA-E0 12 JUMPER CABLE CONNECTION LEADS • For connecting procedures, refer to Owner's Manual. FILS DE BRANCHEMENT DES CÂBLES DE DÉMARRAGE • Effectuer le branchement des câbles de démarrage conformément aux instructions du Manuel du propriétaire. 8FA-2389C-E0 4 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 11
are prohibited. Carrying a passenger can cause loss of control. While using your snowmobile G Before you operate your snowmobile G G Read the Owner's Manual and all labels. Become familiar with all of the operating controls and their function. Consult a Yamaha dealer about any control or - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 12
Safety information G Many surfaces such as ice and hardpacked snow require much longer stopping distances. Be alert, plan ahead and begin decelerating early. The best braking method on most surfaces is to release the throttle and apply the brake gently-not suddenly. Avoid carbon monoxide poisoning - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 13
Description ESU10260 RS90GT 1,2,3 4 5,6,7 8,9 10 14 13 12 11 RS90LTGT 1,2,3 4 5,6,7 8,9 10 14 1. Battery 2. Main fuse 3. Air filter 4. Oil filler cap 5. Fuse box 6. Coolant reservoir 7. Coolant recovery tank 8. Storage compartment 9. Tool kit 10. Tail/brake light 11. Slide rail suspension 12. - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 14
Description 12 3 45 10 9 8 6 7 11 12 13 14 15 18 20 22 24 16 17 19 21 23 25 FHI E LO 27 1. Brake lever 2. Parking brake lever 3. Grip/thumb warmer adjustment switch 4. Engine stop switch 5. Throttle lever 6. Main switch 7. Shift lever 8. Auxiliary DC jack 9. Helmet shield heater jack 10. - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 15
Description TIP G G The snowmobile you have purchased may differ slightly from those shown in the figures of this manual. Design and specifications are subjected to change without notice. 9 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 16
If the T.O.R.S. is activated, make sure that the cause of the malfunction has been corrected and that the engine can be operated without a problem before restarting the engine. Continuing to operate with a malfunction could cause loss of control or damage. If the throttle valves or throttle cable - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 17
Control functions TIP If the T.O.R.S. is activated, the warning light and self-diagnosis warning indicator will flash, and the two-digit code "84" will be displayed in the meter display. If this occurs, have a Yamaha dealer check the system as soon as possible. a warning light (which shows warnings - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 18
it by pushing the "SELECT" button, and then push the "RESET" button for at least 1 second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically, and the display will return to the prior mode after the snowmobile has been refueled and traveled 5 km (3 mi). TIP - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 19
Control functions been reached), the tripmeter must be reset after the oil change for the next periodic oil change to be indicated at the correct time. In that case, reset the oil change tripmeter as follows. 1. Push the "SELECT" button until "ODO" is displayed, then push the "RESET" button for - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 20
Control functions ESU10433 Fuel meter and grip/thumb warmer level indicator The fuel meter and grip/thumb warmer level indicator have eight segments which show the amount of fuel remaining in the fuel tank, the grip warmer level, or the thumb warmer level. 1. High beam indicator light " ESU10472 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 21
, fuel meter indicator, and all segments of the fuel meter start to flash to warn the rider of any of the above problems. If this occurs, have a Yamaha dealer inspect the snowmobile as soon as possible. 1 3 4 1 2 1. Grip/thumb warmer adjustment switch 1. 2. 3. 4. Fuel level warning indicator - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 22
the engine if it is overheating. ESU13364 Self-diagnosis device This model is equipped with a self-diagnosis device for various electrical circuits. If a problem is detected in any of those circuits, the warning light and the self-diagnosis warning indicator flash, and an error code displays in the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 23
Control functions 2 3 1 1. Warning light " " 2. Self-diagnosis warning indicator " 3. Error code display ESU10531 " 1. Headlight beam switch "LIGHTS" 2. High beam "HI" 3. Low beam "LO" ESU10674 Engine stop switch " " The engine stop switch is used to stop the engine in an emergency. Simply push - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 24
Control functions ESU10692 Auxiliary DC jack The auxiliary DC jack is located in the front panel and can be used for accessories. Maximum rated capacity: DC 12 V, 2.5 A (30 W) ESU13261 TIP The auxiliary DC jack cannot be used if the engine is not running. To use the auxiliary DC jack 1. Start the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 25
Control functions ESU13520 Brake lever The snowmobile is stopped by braking the entire drive system. Squeeze the brake lever towards the handlebar grip to stop the snowmobile. 3. Tighten the locknut securely after adjusting the brake lever. ESU10581 Parking brake lever When parking the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 26
Control functions ESU10722 Shroud and covers Securely fasten the shroud and covers before operating the snowmobile. (See page 42 for removal and installation procedures.) 1. Shift lever 1. Shroud 2. Right side cover 1 2 3 1 1. Pull out. 2. Slide to "FWD" (forward). 3. Release. 1. Left side - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 27
Control functions ESU13312 Drive guard EWS00401 2. WARNING G Lift up the rear of the drive guard as shown, and then pull the guard rearward to remove it. G Coming in contact with the rotating Vbelt or clutch parts can cause severe injury or death. Never run the engine with the drive guard - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 28
WARNING Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions. Make sure there is sufficient gasoline in the tank. 1. Before refueling, turn off the engine and be sure that nobody is on the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 29
Control functions in your eyes, see your doctor immediately. If gasoline spills on your skin, wash with soap and water. If gasoline spills on your clothing, change your clothes. Recommended fuel: REGULAR UNLEADED GASOLINE ONLY Fuel tank capacity: 35.6 L (9.41 US gal, 7.83 Imp.gal) Your Yamaha engine - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 30
. G Do not dispose of a damaged or worn out shock absorber yourself. Take the shock absorber to a Yamaha dealer for any service. ESU10894 3 1 (a) 2 (b) 1. Locknut 2. Distance A 3. Spring preload adjusting nut TIP The spring preload setting is determined by measuring distance A, shown in the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 31
Control functions ESU10926 Adjusting the damping forces of the front shock absorbers EWS00740 WARNING The damping forces of the left and right shock absorbers must be adjusted to the same settings. Uneven settings can cause poor handling and loss of stability. Compression damping force The - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 32
Control functions ECS00291 (a) NOTICE Be sure to stop the remote adjusting dial at a marked position around the dial where there is a click. (b) 1. Spring preload adjusting ring To increase the spring preload and thereby harden the suspension, turn the adjusting ring in direction (a). To - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 33
Control functions to the control rod, and that it is tightly fitted on the locknut and against the control rod adjuster. [ECS00323] 4. Tighten the locknut while holding the adjuster in place. Locknut tightening torque: 35 Nm (3.5 m·kgf, 25 ft·lbf) 3 1 2 1. Special wrench 2. Control rod length 3. - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 34
inspection and maintenance procedures and schedules described in the Owner's Manual. EWS00191 WARNING Failure to inspect or maintain the vehicle operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 35
Pre-operation checks ITEM CHECKS Check the deflection. Adjust if necessary. Check for wear and damage. If necessary, have a Yamaha dealer replace track. PAGE Drive track 64 Slide runners Steering Lights, signals and switches Throttle lever Throttle override system (T.O.R.S.) • Check for wear - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 36
Operation ESU13500 Read the Owner's Manual carefully to become familiar with all controls. If there is a control or function you do not understand, ask your Yamaha dealer. EWS00201 WARNING Failure to - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 37
must be changed and the oil filter cartridge replaced. If any engine trouble should occur during the engine break-in period, immediately have a Yamaha riding safely. Before operating the snowmobile, read this Owner's Manual completely and understand the operation of the controls. ESU11310 Break- - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 38
control of the throttle and brake, and master turning techniques in this area before trying more difficult terrain. Set the parking brake and follow the instructions on page 30 to start the engine. Once the engine has warmed up, you are ready to begin riding your snowmobile. G Many surfaces such as - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 39
of your snowmobile. Riding uphill EWS00231 WARNING Operation on slopes can lead to loss of control if proper techniques are not used. Follow these instructions to reduce your risk of an accident. Do not try steeper or more difficult inclines until you have developed your skill on gentle slopes - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 40
WARNING Driving across the face of a slope ("sidehilling") can lead to overturn or loss of control if proper techniques are not used. Follow these instructions to reduce your risk of an accident. Do not try steeper or more difficult inclines until you have developed your skill on gentle slopes - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 41
Operation Sand Rocks G Grass G Bare pavement Other surfaces that should be avoided for the sake of drive track and slide runner life are: G Glare ice surfaces G Snow mixed with a lot of dirt and sand All of the above surfaces have one thing in common in regard to drive track and slide runners: - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 42
Operation ESU11393 Driving EWS00300 WARNING Be sure to read the "SAFETY INFORMATION" section on page 5 and the "Riding your snowmobile" section on page 31 carefully before operating the snowmobile. 1 2 3 TIP Make sure that the engine is warmed up enough before riding. EWS00310 1. Pull out. 2. - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 43
Operation 3. 4. 5. 6. Squeeze the throttle lever slowly to start out. Turn the handlebar in the desired direction. Squeeze the brake lever to stop the snowmobile. Apply the parking brake by moving the parking brake lever to the left. for your snowmobile is best. This will help keep foreign objects - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 44
has moving parts that can catch on body parts or clothing, and electrical parts that can cause shocks or fires. G Running the engine while servicing can lead to eye injury, burns, fire, or carbon monoxide poisoning-possibly leading to death. See page 5 for more information about carbon monoxide - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 45
Periodic maintenance and adjustment INITIAL ITEM REMARKS 1 month or 800 km (500 mi) (40 hr) EVERY Seasonally or 4000 km (2500 mi) (200 hr) PAGE * * Valve clearance Crankcase breather system Fuel line Fuel injection Exhaust system • Check and adjust valve clearance when engine is cold. • Check - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 46
Periodic maintenance and adjustment ESU11563 General maintenance and lubrication chart INITIAL ITEM REMARKS 1 month or 800 km (500 mi) (40 hr) EVERY Seasonally or 4000 km (2500 mi) (200 hr) PAGE Engine oil * Engine oil filter cartridge Cooling system • Change (warm engine before draining). • - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 47
Periodic maintenance and adjustment INITIAL ITEM REMARKS 1 month or 800 km (500 mi) (40 hr) EVERY Seasonally or 4000 km (2500 mi) (200 hr) PAGE * * Skis and ski runners Steering system • Check for wear and damage. • Replace if necessary. • Check toe-out. • Adjust if necessary. • Check bearing - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 48
and adjustment ESU11741 Tool kit The service information included in this manual and the tools provided in the owner the fasteners. TIP If you do not have a torque wrench available during a service operation requiring one, take your snowmobile to a Yamaha dealer to check the torque settings - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 49
the fuel tank cover. 3. 1 1. Auxiliary DC jack coupler Remove the screws, and then remove the cable guide. 2 1 2. Fit the projections on the side cover into the slots as shown. 1. Screw 2. Cable guide 4. Loosen the quick fastener screws. 3. 4. Tighten the fasteners. Install the shroud. 43 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 50
the top cover in the original position, making sure to fit the projections on the cover into the slots in the headlight unit. 1. Cable guide 5. 6. Connect the auxiliary DC jack coupler. Install the left side cover and the shroud. ECS00372 NOTICE G G Make sure that all cables, hoses and leads - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 51
For example, a very white center electrode porcelain color could indicate an intake track air leak or carburetion problem for that cylinder. Do not attempt to diagnose such problems yourself. Instead, take the snowmobile to a Yamaha dealer for inspection and possible repairs. You should periodically - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 52
Periodic maintenance and adjustment ESU12911 Adjusting the throttle cable free play 1. 2. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud, the left and right side covers, and the top cover. (See page 42 for removal procedures.) Remove the headlight unit bolt - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 53
Periodic maintenance and adjustment 9. Fit the weatherstrip on the headlight unit into the recess in the top of the air filter case cover. 1 1. Weatherstrip Check the T.O.R.S. for proper operation. 1. Start the engine. TIP Refer to the "Starting the engine" section on page 30. 2. Hold the pivot - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 54
Periodic maintenance and adjustment 1. Remove the shroud, the left and right side covers, and the top cover. (See page 42 for removal procedures.) Remove the headlight unit bolt on each side of the snowmobile. 2. 1 1. Headlight unit bolt 3. 1. Throttle lever pivot 2. Engine stop switch housing - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 55
Periodic maintenance and adjustment 7. 1 Place the headlight unit in the original position, making sure to insert the projections on the headlight unit stay into the slots on the bottom of the headlight unit. 1 1. Air filter case cover fastener 5. Lift up the air filter element frame and check - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 56
Periodic maintenance and adjustment because there is less air as altitude increases. Less air means less oxygen available for combustion. Your snowmobile utilizes an electronic fuel injection system that delivers the optimal air/fuel ratio required by the engine. Therefore, the fuel injection system - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 57
Periodic maintenance and adjustment G After operating the snowmobile, allow the engine to idle for at least 10 seconds before turning it off. Remove the shroud and the right side cover. (See page 42 for removal procedures.) Disconnect the oil level gauge coupler. NOTICE: Disconnect the oil level - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 58
Periodic maintenance and adjustment 8. 3 Remove the oil filler cap, the cylinder head cap, and the engine oil drain bolt to drain the oil from the oil tank. 1 1 1. Screw 2. Bolt 3. Right lower cover 2 1 5. Remove the bottom panel by removing the bolts. 1. Cylinder head cap 2 1 1. Engine oil - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 59
Periodic maintenance and adjustment TIP G G G A " " mark is stamped on the crankcase near the engine oil drain bolt. Dispose of used oil according to local regulations. Skip steps 10-12 if the oil filter cartridge is not being replaced. 15. Add 2.0 L (2.11 US qt, 1.76 Imp.qt) of the recommended - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 60
Periodic maintenance and adjustment gine oil drain bolts, the cylinder head cap, and the oil filler cap are installed correctly. 19. Turn the engine off, and then connect the oil level gauge coupler. NOTICE: If oil is leaking or the oil level warning indicator comes on when the engine is running, - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 61
Periodic maintenance and adjustment ant as soon as possible, otherwise the cooling system will not be protected against frost and corrosion. If water has been added to the coolant, have a Yamaha dealer check the antifreeze content of the coolant as soon as possible, otherwise the effectiveness of - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 62
Periodic maintenance and adjustment Recommended antifreeze: High-quality ethylene glycol antifreeze containing corrosion inhibitors Antifreeze and water mixing ratio: 3:2 Total amount: RS90GT 5.62 L (5.94 US qt, 4.95 Imp.qt) RS90LTGT 6.13 L (6.48 US qt, 5.39 Imp.qt) 5. 6. Start the engine, allow it - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 63
Periodic maintenance and adjustment Have a Yamaha dealer make this adjustment. 1. 2. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud and the left side cover, and then remove the drive guard. (See pages 21 and 42 for removal procedures.) Remove the screws and - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 64
Periodic maintenance and adjustment Standard V-belt position: From 1.5 mm (0.06 in) above the edge of the secondary sheave assembly to 0.5 mm (0.02 in) below the edge 8. If the V-belt position is incorrect, adjust it by removing or adding a spacer on each V-belt position adjusting bolt. 9. Tighten - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 65
Periodic maintenance and adjustment maximum level mark. NOTICE: Make sure that no foreign material enters the drive chain housing. [ECS00531] 1 1. Left lower cover 14. Install the drive guard, and then install the left side cover and the shroud. ESU12104 Drive chain housing To check the drive - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 66
1. Notch 2. Projection A soft, spongy feeling in the brake lever indicates a failure in the brake system. Do not operate the snowmobile if you find any problems in the brake system. You could lose braking ability, which could lead to an accident. Ask a Yamaha dealer to inspect and repair the brake - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 67
Periodic maintenance and adjustment Brake pad wear limit: 4.7 mm (0.19 in) 4. Install the right side cover and the shroud. 4. Turn the parking brake cable adjusting bolt in or out to adjust the cable length. Checking the parking brake pads Check the parking brake pads for wear according to the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 68
Periodic maintenance and adjustment 7. 8. Tighten the parking brake pad adjusting bolt locknut. Install the right side cover and the shroud. Brake fluid replacement is necessary when the following components are replaced during the periodic maintenance or if they are damaged or leaking. G All oil - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 69
Periodic maintenance and adjustment 1. Ski runner wear limit 1. Distance A 2. Distance B Ski toe-out (distance A - distance B): 0.0-15.0 mm (0.00-0.59 in) TIP Move the front tip of each ski fully inward before measuring or aligning. 3. 1. Ski wear limit If the alignment is not correct, consult - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 70
to allow the drive track to spin, a suitable stand must be used to support the rear of the snowmobile. Never allow anyone to hold the rear of the is damaged to the depth where fabric reinforcement material is visible or support rods are broken. Otherwise, track damage or failure could result in - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 71
Periodic maintenance and adjustment Standard drive track deflection: 30.0-35.0 mm (1.18-1.38 in) 3. If the deflection is incorrect, adjust the drive track. Adjusting the drive track 1. Loosen the rear axle nut. Drive track alignment Left adjusting bolt Right adjusting bolt Shifted to right Turn out - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 72
Periodic maintenance and adjustment Shifted to left If the slide runners reach the wear limit, they should be replaced. 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal 1. Slide runner 2. Wear limit height 5. Adjust the drive track deflection to specification. NOTICE: The right - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 73
Periodic maintenance and adjustment 1 1 1. Lubrication point 1. Lubrication point RS90GT 1 1. Throttle cable end 1. Lubrication point RS90LTGT 1 1. Lubrication point 1. Lubrication point ESU12221 Replacing a headlight bulb 1. 2. Remove the top cover. (See page 42 for removal procedures.) - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 74
Periodic maintenance and adjustment 1. Screw 1. Bulb holder 6. 7. Remove the bulb. Install the new bulb, and then hook the bulb holder onto the headlight unit. NOTICE: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 75
Periodic maintenance and adjustment 2. Use a Phillips screwdriver to turn the headlight beam adjusting screw and adjust the headlight beams. To lower the headlight beams, turn the headlight beam adjusting screw in direction (a). To raise the headlight beams, turn the headlight beam adjusting screw - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 76
Periodic maintenance and adjustment dealer charge your battery. Using a conventional battery charger will damage the battery. Do not charge the battery quickly. G 1 ESU12952 Replacing a fuse EWS00550 WARNING Be sure to use the specified fuse. A wrong fuse could cause electrical system damage or - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 77
Periodic maintenance and adjustment 9. 2 1 Unhook the battery band, and then remove the battery cover. 1 1. Air filter case fastener 2. Air temperature sensor coupler 2 1. Battery cover 2. Battery band 7. Slide the oil tank breather hose clamp away from the air filter case, and then disconnect - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 78
Periodic maintenance and adjustment Specified fuses: Main fuse: 40.0 A Fuel injection system fuse: 10.0 A Ignition fuse: 15.0 A Radiator fan fuse: 5.0 A Headlight fuse: 20.0 A Signaling system fuse: 7.5 A Auxiliary DC jack fuse: 3.0 A Helmet shield heater jack fuse: 3.0 A Spare fuses: 20.0 A, 15.0 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 79
Periodic maintenance and adjustment 1 1. Weatherstrip 17. Install the headlight unit bolts, and then tighten them to the specified torque. Tightening torque: Headlight unit bolt: 3 Nm (0.3 m·kgf, 2.2 ft·lbf) 18. Install the top cover, the left and right side covers, and the shroud. TIP If the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 80
Troubleshooting ESU12384 Engine turns over but does not start 1. Fuel system No fuel supplied to combustion chamber • No fuel in tank: Supply fuel. ↓ • Clogged fuel line: - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 81
Troubleshooting G Be sure to pull the lead covers back over the terminals completely. If the terminals are exposed, they could come into contact with the frame - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 82
Troubleshooting 7. Pull the black (-) connecting lead cover to expose the terminal through the slit in the cover, and then connect the black (-) jumper cable to the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 83
Troubleshooting V-belt twists G G G Improper V-belt: Replace with the correct Vbelt. Incorrect V-belt dealer to inspect. Oily or dirty V-belt or primary and secondary sheave assembly surfaces: Clean. Problem with the driveline: See "V-belt twists" above. V-belt slips or becomes extremely hot G G - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 84
Storage ESU12433 Long-term storage requires some preventive procedures to guard against deterioration. marks. If the windshield is scratched, use a quality plastic polishing compound after washing. Cleaning Thoroughly clean the snowmobile, inside and out, to remove the corrosive salts and acids - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 85
a plastic or vinyl cover-condensation could be trapped underneath which could increase the chances of rusting. Returning to service after storage When returning your snowmobile to service, install the V-belt and battery and adjust the drive track. Remove the spark plugs and clean or replace them - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 86
parallel 3-cylinder Displacement: 1049 cm³ Bore × stroke: 82.0 × 66.2 mm (3.23 × 2.61 in) Idling speed: 1250-1350 r/min Engine oil: Recommended grade: API service SG type or higher, JASO standard MA Recommended brand: YAMALUBE Type: SAE 0W-30 Fuel injection: ID mark: 8JA1 00 Fuel: Type: REGULAR - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 87
Specifications Fuel tank capacity: 35.6 L (9.41 US gal, 7.83 Imp.gal) Engine oil quantity: With oil filter cartridge replacement: 3.3 L (3.49 US qt, 2.90 Imp.qt) Without oil filter cartridge replacement: 3.1 L (3.28 US qt, 2.73 Imp.qt) Total amount: 4.0 L (4.23 US qt, 3.52 Imp.qt) Brake: Type: - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 88
Consumer information ESU12480 Identification number records Record the frame serial number, engine serial number (Primary ID), and key identification number in the spaces provided for assistance when ordering spare parts from a Yamaha dealer. Also, record and keep the ID numbers in a separate place - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 89
Consumer information ESU13460 Vehicle Emission Control Information label 1 1. Vehicle Emission Control Information label The Vehicle Emission Control Information label is affixed at the location in the illustration. This label shows specifications related to exhaust emissions as required by - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 90
and maintain the snowmobile as specified in the appropriate Owner's Manual. WARRANTY TRANSFER: To transfer any remaining warranty from the original . An inspection and registration fee will be charged for this service. EMISSION CONTROL SYSTEM WARRANTY Yamaha Motor Corporation, USA also warrants - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 91
of having the dealer do them? A. Yes, if you are a qualified snowmobile mechanic and follow the procedures specified in the Owner's and Service Manual. We do recommend, however, that items requiring special tools or equipment be done by a Yamaha snowmobile dealer. Q. Under what conditions is the - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 92
machine requires warranty service, you must take it to any authorized Yamaha snowmobile dealer within the continental United States. Be sure to bring your warranty identification card or other valid proof of the original date of purchase. If a question or problem arises regarding warranty, first - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 93
Consumer information ESU12510 YAMAHA EXTENDED SERVICE (Y.E.S.) 87 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 94
Suspension ...23 T Throttle cable free play, adjusting ...46 Throttle lever ...10 Throttle override system (T.O.R.S.) ...10 Throttle override system (T.O.R.S.), checking...47 Tool kit...42 Transporting ...37 Troubleshooting ...74 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 95
Index V Valve clearance...50 V-belt...56 V-belt holders ...22 Vehicle Emission Control Information label ...83 - 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 96
- 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 97
- 2010 Yamaha Motorsports RS Vector LTX GT | Owners Manual - Page 98
YAMAHA MOTOR CO., LTD. PRINTED IN JAPAN 2009.05-0.5×1 CR PRINTED ON RECYCLED PAPER
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
 |
 |
OWNER’S MANUAL
RS90GTZ
RS90LTGTZ
8JA-28199-10
LIT-12628-02-91
Read this manual carefully
before operating this vehicle.