2012 Toyota Prius Navigation Manual - Page 351

2. ADVANCED PARKING GUIDANCE SYSTEM WHEN THE PRE-SUPPORT FUNCTION IS IN USE Press the pre-support switch once Sensor detection range 1 2 Check that the assist mode switch is ON. With the vehicle speed at less than 9 mph (15 km/h) and the vehicle on the near side of the parking space, press the pre-support switch once. Confirm that the display has switched to the "Parallel Parking Mode" screen. The mode will switch with each press of the pre-support switch. If the shift position is in "P" or if the vehicle speed is 9 mph (15 km/h) or above, two beeps will sound when the pre-support switch is pressed, and the display will not change. (If the shift position is in "R", the display will not change.) 3 Move the vehicle to a position parallel to the road (or road shoulder) that is also approximately 3 ft. (1 m) away from the parked vehicle, and then proceed straight forward. Approx. 3 ft. (1 m) Desired parking location To cancel the guidance function, turn off the pre-support function by pressing the pre-support switch twice. 344 PRIUS v (US) NAVI 47675U 11.09.08 12:54