2008 Toyota Tacoma Owners Manual - Page 42

08 02.19 -Activating alarm To lock and unlock all doors, push the switches of the transmitter slowly and securely. To lock: Push the " " (lock) switch. All the doors are locked simultaneously. At this time, the turn signal lights flash once. Check to see that the doors are securely locked. If any door is not securely closed, or if the key is in the engine switch, locking cannot be performed by the " " switch. When unlocking a door when all the doors are locked, the interior light comes on. The lights remain on for about 15 seconds unless either door is opened and closed. (For further information, see "Interior light" on page 145 in Section 1 −5.) You have 30 seconds to open a door after using the wireless remote unlock feature. If a door is not opened by then, all the doors will be automatically locked again. If the " " or " " switch is kept pushed in, the locking or unlocking operation is not repeated. Release the switch and then push again. LS12015a To unlock: Push the " " switch once to unlock the driver's door alone. Pushing the switch twice within 3 seconds unlocks all the doors simultaneously. At this time, the turn signal lights will flash twice. Pushing the " " (alarm) switch blows the horn intermittently and flashes the headlights, tail lights, turn signal lights, and interior light. The " " switch is used to deter vehicle theft when you witness anyone attempting to break into or damage your vehicle. The alarm will last for one minute. To stop alarm midway, push the " " switch once again, lock or unlock a door with transmitter, or turn the engine switch from the "LOCK" to "ON" position. The alarm does not work when the engine switch is in the "ON" position. 18 2008 TACOMA from Apr. '08 Prod. (OM35898U)