2008 Toyota Tacoma Owners Manual - Page 154

08 02.19 To install a Child Restraint System in the rear seat properly, make sure the bottom seat cushion is flipped over. If the bottom seat cushion is already flipped over, proceed to step 3. 1. Pull the lock release strap. 2. Flip over the bottom cushion. CAUTION To install the child restraint system properly, make sure the bottom cushion is flipped over whenever you use a child restraint system in the rear seating area. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 119 in this Section.) 3. Be sure to follow the Child Restraint System manufacturer's instructions for the recommended installation procedure. 4. Push and pull the Child Restraint System in different directions to ensure a secure installation. 5. If the Child Restraint System shakes or vibrates when used, install a cushion between the Child Restraint System and the flipped−over surface of the seat. For installation details, refer to the instruction manual equipped with each product. LS13004a CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. 130 2008 TACOMA from Apr. '08 Prod. (OM35898U)