2008 Toyota Sienna Owners Manual - Page 274

08 SIENNA_U (L/O 0801) RESETTING TO A SLOWER SPEED Push the lever down in the "− SET" direction and hold it. The displayed speed will decrease in increments of 5 mph (for the U.S.A.) or 5 km/h (for Canada). Release the lever when the desired speed is attained. The vehicle speed will gradually decrease to the display speed. However, a faster way to reset is to depress the brake pedal and then push the lever down in the " − SET" direction. If the control lever is released when the vehicle speed exceeds the upper limit of the preset speed traveling downhill while you are pushing the lever down, the system will memorize the upper limit of the preset speed as a preset speed. Even if you downshift from "D" to "4" in the vehicle−to−vehicle distance control mode, engine braking will not be enabled because this mode is not cancelled. To decrease the vehicle speed, reset to a slower speed with the cruise control lever or depress the brake pedal. If you use the brake pedal, cruise control is cancelled. CHANGING DISTANCE VEHICLE−TO−VEHICLE You can select one of the following vehicle−to−vehicle distances. 1. LONG 2. MIDDLE 3. SHORT Each time you pull the briefly toward you, the from LONG to MIDDLE then back to LONG. You setting on the display. distance switch setting changes to SHORT and can confirm the Your vehicle speed changes in proportion to the speed of the vehicle ahead, maintaining the selected distance. However, if the vehicle ahead is slower, the selected distance will be shorter than the designated distance. When the vehicle−to−vehicle distance control mode is activated or the "READY" indicator comes on, the vehicle−to−vehicle distance setting can be changed. The vehicle−to−vehicle distance is always set to LONG when the engine switch is turned on. 233 2008 SIENNA from Aug. '08 Prod. (OM45455U)