2004 Toyota Highlander Navigation Manual - Page 155

AIR CONDITIONING SETTING OPERATION - manual control When one of the manual control switches is depressed while operating in automatic mode, the operation corresponding to the depressed switch is set. Other conditions continue to be adjusted automatically. If manual air flow selection is desired - 2. Use the "TEMP" button to set the desired vehicle interior temperature. The "TEMP" selector button is used to set the desired interior temperature. To increase the interior temperature, press the "Ɯ" side, to decrease it, press the "Ɲ" side. If quick heating or cooling is desired - Push the "TEMP" button on either side and hold it until the maximum figure or minimum figure appears. The outlets from which air is delivered can be selected manually by touching the switch. The function of each mode is as follows: Panel - Air flows mainly from the instrument panel vents. 2 Bi-level - Air flows from both the floor vents, instrument panel vents. When you set the temperature selector setting at about the middle in automatic operation, warm air flows out of the floor vents and relatively low - temperature air flows out of the instrument panel vents. 3 Floor - Air flows mainly from the floor vents. 4 Floor/windshield - Air flows mainly from the floor vents, windshield vents. Take in the fresh air with selecting the FRESH mode by the air intake control button. The selected mode is highlighted in green. 1 155