2014 Ducati Hypermotard Owners Manual

2014 Ducati Hypermotard Manual

Get 2014 Ducati Hypermotard PDF manuals and user guides View all 2014 Ducati Hypermotard manuals

2014 Ducati Hypermotard manual content summary:

  • 2014 Ducati Hypermotard | Owners Manual - Page 1
  • 2014 Ducati Hypermotard | Owners Manual - Page 2
    standards of Ducati motorcycles are constantly being updated consequent to the development of new design solutions, equipment and accessories. Although the manual includes fully updated information at the time of print, Ducati Motor Holding S.p.A. therefore reserves the right to make changes without
  • 2014 Ducati Hypermotard | Owners Manual - Page 3
    Owner's manual US/CANADA 1
  • 2014 Ducati Hypermotard | Owners Manual - Page 4
    the use of original spare parts. In the Owner's Manual you'll find instructions for performing small maintenance procedures. The most important servicing and maintenance procedures are contained in the Service Manual available at Authorized Service Centers of Ducati Motor Holding S.p.A.. In your own
  • 2014 Ducati Hypermotard | Owners Manual - Page 5
    25 California evaporation emission system 26 Ducati limited warranty on emission control system 27 Safety guidelines 7 Warning symbols used in the manual. 7 Permitted use 8 Rider's obligation 8 Reporting of safety defects 10 Rider education 10 Clothing 11 "Best Practices" for safety 12 Refueling 14
  • 2014 Ducati Hypermotard | Owners Manual - Page 6
    50 Menu 2 functions: Coolant temperature 51 Menu 2 functions: Air temperature (AIR) 53 Menu 2 functions: Clock 54 SET UP - Riding Mode set 55 SERVICE function - Maintenance interventions 56 Active / not active ERRORS indication 59 Indication if the LAP function is active/not active 60 Riding Mode
  • 2014 Ducati Hypermotard | Owners Manual - Page 7
    Controls 135 Position of motorcycle controls 135 Key-operated ignition switch and steering lock 136 Left-hand switch 137 Clutch lever 138 Right-hand switch 141 Throttle twistgrip 142 Front brake lever 143 Rear brake pedal 144 Gear change pedal 145 Adjusting the position of the gearchange and rear
  • 2014 Ducati Hypermotard | Owners Manual - Page 8
    Clean the motorcycle 195 Storing the motorcycle 196 Important notes 196 Suspensions 208 Exhaust system 208 Available colors 209 Electrical system 210 Scheduled maintenance chart 197 Scheduled maintenance chart: operations to be performed by the Dealer 197 Scheduled maintenance chart: operations
  • 2014 Ducati Hypermotard | Owners Manual - Page 9
    or questions, consult a Dealer or Authorized Service Center. Attention Failure to observe these instructions may lead to a hazardous situation and cause viewed from the riding position. Warning symbols used in the manual. Different forms of information regarding potential hazards that may affect
  • 2014 Ducati Hypermotard | Owners Manual - Page 10
    Permitted use This motorcycle may be used on dirt roads or for offroad riding. Attention Riding without a license is illegal and punishable by law. Make sure you always have your license on you when setting out on the motorcycle. Do not allow inexpert riders or those not in possession of an
  • 2014 Ducati Hypermotard | Owners Manual - Page 11
    Some countries require mandatory insurance coverage. Attention Make sure that the helmet is in compliance with safety specifications, provides excellent visibility, is the correct size for the head, and has the DOT (Department of Transportation) label affixed to the helmet surface. Laws regulating
  • 2014 Ducati Hypermotard | Owners Manual - Page 12
    of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Ducati North America. To contact NHTSA, you may either call the Auto read and familiarize with the contents of the M.O.M. (Motorcycle Operator Manual) for
  • 2014 Ducati Hypermotard | Owners Manual - Page 13
    information on your State and which can be viewed on the M.S.F. (Motorcycle Safety Foundation) website (www.msf-usa.org). You are strongly recommended to take a riding course approved by the M.S.F. (Motorcycle Safety Foundation). Important In any case, avoid wearing loose or floppy clothing that
  • 2014 Ducati Hypermotard | Owners Manual - Page 14
    " during the running-in period. Failure to follow these instructions releases Ducati Motor Holding S.p.A. from any liability whatsoever for ride. Before starting the motorcycle, always performs the checks detailed in this manual (see page 162). Important The rider should ALWAYS keep both hands on
  • 2014 Ducati Hypermotard | Owners Manual - Page 15
    Important The pillion passenger should always hold on to the grab handles on the frame under the seat with both hands. Important Visually inspect the tires at regular intervals for cracks and cuts, especially on sidewalls, bulges or large spots which are indicative of internal damage. Replace them
  • 2014 Ducati Hypermotard | Owners Manual - Page 16
    Refueling Refuel the motorcycle in an open area and with the engine switched off. Do not smoke or ever use flames during refueling. Be careful never to drop fuel on the engine or exhaust pipe. When refueling, do not fill the tank completely: fuel should never be touching the rim of filler recess.
  • 2014 Ducati Hypermotard | Owners Manual - Page 17
    steering head or front mudguard, as this would affect stability and be dangerous. Important Be sure to secure the luggage to the supports provided on the motorcycle as firmly as possible. Improperly secured luggage may affect stability. Attention The maximum speed permitted with the side panniers
  • 2014 Ducati Hypermotard | Owners Manual - Page 18
    fluid onto plastic, rubber or painted parts of the motorcycle to avoid the risk of damage. Protect these parts with a clean shop rag before servicing the motorcycle. Keep away from children. Attention Take care not to spill engine coolant on the exhaust system or engine parts. These parts may be
  • 2014 Ducati Hypermotard | Owners Manual - Page 19
    The cooling fan operates automatically: keep hands well clear and make sure your clothing does not get caught in the fan. Battery Attention The battery gives off explosive gases; keep it away from any source of ignition such as sparks, flames and cigarettes. Charge the battery in a wellventilated
  • 2014 Ducati Hypermotard | Owners Manual - Page 20
    Vehicle ID number Note These numbers identify the motorcycle model and should always be indicated when ordering spare parts. We recommend that you note the frame number of your motorcycle in the space below. Frame number Fig 1 DUCATI TYPE OF MOTORCYCLE MODEL YEAR PLANT OF MANUFACTURE SEQUENTIAL
  • 2014 Ducati Hypermotard | Owners Manual - Page 21
    Engine ID number Note These numbers identify the motorcycle model and should always be indicated when ordering spare parts. We recommend that you note the engine number of your motorcycle in the space below. Engine number. Fig 3 19
  • 2014 Ducati Hypermotard | Owners Manual - Page 22
    Plate positioning 1 2 3 4 5 Fig 4 20
  • 2014 Ducati Hypermotard | Owners Manual - Page 23
    1 2 A 3 = = 72 ÷ 74 mm 5 4 Fig 5 21
  • 2014 Ducati Hypermotard | Owners Manual - Page 24
    6 7 8 (only Canada) Fig 6 22
  • 2014 Ducati Hypermotard | Owners Manual - Page 25
    6 7 8 (Only Canada ) Fig 7 23
  • 2014 Ducati Hypermotard | Owners Manual - Page 26
    does not react in the same way, but is toxic. Ducati utilizes lean carburetor settings and other systems to reduce carbon monoxide and hydrocarbons. Problems that may affect motorcycle emissions If you are aware of any of the following symptoms, have the vehicle inspected and repaired by your local
  • 2014 Ducati Hypermotard | Owners Manual - Page 27
    the performance of the required maintenance listed in your owner's manual. Ducati North America, Inc. recommends that you retain all are responsible for presenting your motorcycle to a Ducati dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time
  • 2014 Ducati Hypermotard | Owners Manual - Page 28
    California evaporation emission system This system consists of: 1) 2) 3) 4) 5) 6) Warn air inlet; Canister; Dell'Orto jet; Fuel tank; Breather pipe; Intake manifolds. 3 6 4 5 2 1 Fig 8 Attention In the event of a fuel system malfunction, contact a Ducati Authorized Service Center. 26
  • 2014 Ducati Hypermotard | Owners Manual - Page 29
    Ducati limited warranty on emission control system Ducati North America, Inc., 10443 Bandley Drive Cupertino, California, 95014 warrants that each new 1998 and later Ducati motorcycle, that includes as standard equipment a headlight, taillight and stoplight, and is street legal: A) is designed,
  • 2014 Ducati Hypermotard | Owners Manual - Page 30
    which adversely affect performance and/or (5) use in competitive racing or related events. B. Inspections, replacement of parts and other services and adjustments required for routine maintenance. C. Any motorcycle on which odometer mileage has been changed so that actual mileage cannot be
  • 2014 Ducati Hypermotard | Owners Manual - Page 31
    not liable for these parts. The owner is responsible for the performance of all required maintenance. Such maintenance may be performed at a service establishment or by any individual. The warranty period begins on the date the motorcycle is delivered to an ultimate purchaser. Ducati North America
  • 2014 Ducati Hypermotard | Owners Manual - Page 32
    Instrument Panel (Dashboard) Instrument panel 1) LCD Dot-Matrix. 2) REV COUNTER (rpm). Indicates engine revs per minute. 3) NEUTRAL LIGHT N (GREEN). Comes on when in neutral position. (BLUE). 4) HIGH BEAM LIGHT Turns on to indicate that the high beam lights are on. (RED). 5) ENGINE OIL PRESSURE
  • 2014 Ducati Hypermotard | Owners Manual - Page 33
    6) LOW FUEL LIGHT (AMBER YELLOW). Comes on when fuel is low and there is about a gallon (4 liters) of fuel left in the tank. 7) TURN INDICATOR LIGHTS (GREEN). Illuminates and flashes when the turn indicator is in operation. They both come on and flash when the Hazard function is in operation 8) "
  • 2014 Ducati Hypermotard | Owners Manual - Page 34
    (5 km/h) Light flashing Light steady Light off ABS enabled and functioning ABS disabled with the menu func- ABS disabled and not functioning tion due to problem (**) The ABS should be considered actually disabled only if the light continues to flash after starting the engine. 32
  • 2014 Ducati Hypermotard | Owners Manual - Page 35
    Acronyms and abbreviations used in the Manual ABS Anti-lock Braking System BBS Black Box System CAN Controller Area Network DDA DUCATI Data Acquisition DSB Instrument panel DTC DUCATI Traction Control ECU
  • 2014 Ducati Hypermotard | Owners Manual - Page 36
    Ride by Wire (RbW) The Ride by Wire system is the electronic device that controls throttle opening and closing. Since there is no mechanical connection between the throttle twistgrip and the throttle body, the ECU can adjust power delivery by directly affecting throttle opening angle. The Ride by
  • 2014 Ducati Hypermotard | Owners Manual - Page 37
    Function pushbuttons 1) CONTROL BUTTON Button used to display and set instrument panel parameters with the position " ". 2) CONTROL BUTTON Button used to display and set instrument panel parameters with the position " ". 3) HIGH-BEAM FLASH BUTTON FLASH The high-beam flash button may also be used for
  • 2014 Ducati Hypermotard | Owners Manual - Page 38
    LCD unit functions 5 6 4 Attention Adjustments/settings on the instrument panel are strictly to be carried out when the motorcycle is stationary. Never operate the instrument panel controls while riding the motorcycle. Data displayed on the main screen are as follows: 1) Engine RPM Indicator; 2)
  • 2014 Ducati Hypermotard | Owners Manual - Page 39
    LCD - How to set/display parameters Upon key-on, the instrument panel enables the rev counter, which increases from 0 to 11,000 and decreases going back to 0; the "DUCATI HYPERMOTARD" lettering is enabled, in a scrolling manner, on the Dot-Matrix area; warning lights come on in sequence from the
  • 2014 Ducati Hypermotard | Owners Manual - Page 40
    ; MENU 2 (4): engine coolant temperature indicator SET UP - Set "Riding Mode" indicator (5); Engine RPM indicator (RPM) (7); Vehicle speed indicator (8); "SERVICE" indicator (if active, only). 5 6 4 1 Press button (2) to scroll MENU 1 and shift to the following functions: TRIP 1 - Trip meter
  • 2014 Ducati Hypermotard | Owners Manual - Page 41
    Vehicle speed indicator This function shows vehicle speed (Km/h or mph, based on the selected unit of measurement). The instrument panel receives information about the actual speed (calculated in km/h) and displays the number increased by 5%. Maximum speed displayed is 186 mph (299 km/h). Over 186
  • 2014 Ducati Hypermotard | Owners Manual - Page 42
    Engine rpm indicator (RPM) This function shows engine rpm. The instrument panel receives the engine rpm information and displays it. This information on rpm is displayed progressively from left to right. Fig 15 40
  • 2014 Ducati Hypermotard | Owners Manual - Page 43
    Menu 1 functions MENU 1 functions are: Odometer (TOT); Trip meter 1 (TRIP1); Trip meter 2 (TRIP2); Partial fuel reserve counter (TRIP FUEL); Average Fuel Consumption (CONS. AVG); Instantaneous fuel consumption (CONS.); Average speed (SPEED AVG); Trip time (TRIP TIME). Fig 16 41
  • 2014 Ducati Hypermotard | Owners Manual - Page 44
    Value will not be lost upon Battery Off. Note If a string of flashing dashes " ----- " is displayed within odometer function, please contact a Ducati Dealer or Authorized Service Center. Fig 17 42
  • 2014 Ducati Hypermotard | Owners Manual - Page 45
    Menu 1 functions: Trip meter (TRIP 1) This function shows the partial distance traveled (km or miles, based on the specific application). Holding the (1) button pressed for 3 seconds when this function is displayed resets the trip meter. When the reading exceeds 9999.9, distance traveled is reset
  • 2014 Ducati Hypermotard | Owners Manual - Page 46
    Menu 1 functions: "Trip 2" meter (TRIP 2) This function shows the partial distance traveled (km or miles, based on the specific application). Holding the (1) button pressed for 3 seconds when this function is displayed resets the trip meter. When the reading exceeds 9999.9, distance traveled is
  • 2014 Ducati Hypermotard | Owners Manual - Page 47
    Menu 1 functions: Partial fuel reserve counter (TRIP FUEL) This function shows the distance traveled (km or miles, based on the specific application) on fuel reserve. When the Low fuel light turns on, the display automatically shows the TRIP FUEL function, regardless of the currently displayed
  • 2014 Ducati Hypermotard | Owners Manual - Page 48
    Menu 1 functions: Average Fuel Consumption indicator (CONS. AVG) This function indicates the "average" fuel consumption. The calculation is made considering the quantity of fuel used and the distance traveled since Trip 1 was last reset. When Trip 1 is reset, the value is reset and the first value
  • 2014 Ducati Hypermotard | Owners Manual - Page 49
    Menu 1 functions: Instantaneous fuel consumption indicator (CONS.) This function indicates the "instantaneous" fuel consumption. The calculation is made considering the quantity of fuel used and the distance traveled during the last second. The reading is in "mpg" (miles per gallon). The unit of
  • 2014 Ducati Hypermotard | Owners Manual - Page 50
    Menu 1 functions: Average speed indicator (SPEED AVG) This function shows the average speed of the motorcycle. The calculation considers the distance and time since Trip 1 was last reset. When Trip 1 is reset, the value is reset and the first value available is displayed 10 seconds after the reset.
  • 2014 Ducati Hypermotard | Owners Manual - Page 51
    Menu 1 functions: Trip time indicator (TIME TRIP) This function shows the vehicle trip time. The calculation considers the time since Trip 1 was last reset. When Trip 1 is reset, this value is reset as well. The calculation active phase occurs when the engine is running and the vehicle is stopped (
  • 2014 Ducati Hypermotard | Owners Manual - Page 52
    Menu 2 functions MENU 2 functions are: Engine coolant temperature; Ambient air temperature (AIR); Clock. Fig 25 50
  • 2014 Ducati Hypermotard | Owners Manual - Page 53
    Menu 2 functions: Coolant temperature This Function is used to display coolant temperature (°F or °C, based on the specific application). The instrument panel receives the temperature reading value and displays it. The reading is indicated as follows: if the reading is between -38°F and +102°F (39°C
  • 2014 Ducati Hypermotard | Owners Manual - Page 54
    Note In the event of a sensor "error", a string of flashing dashes ("---") is shown and the "Engine/ Vehicle diagnosis - EOBD" light comes on. Fig 27 52
  • 2014 Ducati Hypermotard | Owners Manual - Page 55
    Menu 2 functions: Air temperature (AIR) This function indicates ambient temperature. Instrument panel takes temperature value directly from sensor and displays it. Note When the vehicle is stopped, the engine heat may influence the displayed temperature. Fig 28 53
  • 2014 Ducati Hypermotard | Owners Manual - Page 56
    Menu 2 functions: Clock This function displays the time. Time is always displayed as follows: AM from 0:00 to 11:59; PM from 12:00 to 11:59. If battery power is suddenly cut off (Batt-OFF): when battery power is restored and upon next Key-On, the clock is reset and restarts operating from "0:00".
  • 2014 Ducati Hypermotard | Owners Manual - Page 57
    SET UP - Riding Mode set This function indicates the "Riding Mode" set for the vehicle. Each riding mode can be changed using the "Riding Mode" function. The set riding mode, the Traction Control level (DTC) and corresponding ABS level are indicated. Three different riding modes can be set: SPORT,
  • 2014 Ducati Hypermotard | Owners Manual - Page 58
    the vehicle. All maintenance indicators can be "Reset" only by the authorized Ducati Service Center that will service the vehicle. First indicator: OIL SERVICE (600 mi - 1,000 Km) The first maintenance indicator is the "OIL SERVICE" signal, coming on when the first 600 miles (1,000 km ) are reached
  • 2014 Ducati Hypermotard | Owners Manual - Page 59
    as the relevant symbols and mileage countdown, will come steady on for 2 seconds upon every KeyOn. When just 600 mi (1,000 km) are left before service threshold is reached, the indicator will be enabled (steady on) upon key-On for 5 seconds (instead of 2 seconds). Both signals will be active until
  • 2014 Ducati Hypermotard | Owners Manual - Page 60
    the threshold required to carry out a maintenance operation is reached, the type of operation to be carried out ("OIL SERVICE" or "DESMO SERVICE") will come on upon each key-On. The "OIL SERVICE" or "DESMO SERVICE" indicators will come on (flashing) upon each Key-On for 5 seconds; while the OIL
  • 2014 Ducati Hypermotard | Owners Manual - Page 61
    Active / not active ERRORS indication This function indicates that one or more errors are present. The type and number of errors can be displayed using the Setting Menu through the ERRORS function; when "ERRORS" is off, no errors are present. Fig 34 59
  • 2014 Ducati Hypermotard | Owners Manual - Page 62
    Indication if the LAP function is active/not active This function indicates if the LAP function (Lap time) is active. When "LAP" is off, function is disabled. Fig 35 60
  • 2014 Ducati Hypermotard | Owners Manual - Page 63
    Riding Mode SET UP function (riding style change) This function allows changing vehicle riding mode. Each riding mode is associated to a different intervention level of the traction control system (DTC - Ducati Traction Control), a different braking control (ABS - Anti-lock Braking System) and a
  • 2014 Ducati Hypermotard | Owners Manual - Page 64
    Once the desired riding mode is highlighted, keep button (4) pressed for 3 seconds and instrument panel will check throttle control position and front and rear brake pressure: if throttle control is "closed" and brakes are released or vehicle is stopped, the instrument panel will confirm the
  • 2014 Ducati Hypermotard | Owners Manual - Page 65
    If the "SET UP" menu is enabled and button (4) is not pressed for 10 consecutive seconds, the instrument panel will automatically quit the displayed page without any setup change. Attention Ducati recommends changing the Riding mode when the vehicle is stopped. If the riding mode is changed while
  • 2014 Ducati Hypermotard | Owners Manual - Page 66
    Error display (ERRORS) This function identifies any abnormal vehicle behavior. The instrument panel activates any abnormal vehicle behavior in real time (ERRORS). If one or more "errors" occur during bike operation, the "ERROR" indicator will appear on display RH side. Under these circumstances (one
  • 2014 Ducati Hypermotard | Owners Manual - Page 67
    any time by simply pressing button (4), with the highlighted "EXIT" indicator. Attention When one or more errors are displayed, always contact a Ducati Dealer or Authorized Service Center. 65
  • 2014 Ducati Hypermotard | Owners Manual - Page 68
    1 2 1 2 1 4 2 2 Fig 41 66
  • 2014 Ducati Hypermotard | Owners Manual - Page 69
    The table below shows the errors that can be displayed: Displayed error CAN LINE UNKNOWN DEVICE ABS (Antilock Braking System) BBS (Black Box System) Description CAN line "BUS Off" (communication line of the several control units) Control unit not acknowledged by the system - wrong SW ABS control
  • 2014 Ducati Hypermotard | Owners Manual - Page 70
    Displayed error Description intake duct air temperature sensor malfunction injection relay malfunction ignition coil malfunction injector malfunction engine rpm sensor malfunction lambda sensor or lambda sensor heater malfunction vehicle starting relay malfunction secondary air sensor malfunction
  • 2014 Ducati Hypermotard | Owners Manual - Page 71
    SETTING MENU This menu is used to set/enable some motorcycle functions. To access the Setting Menu, keep button (2) pressed for two seconds; once this menu is accessed it will no longer be possible to scroll functions on the Display. - error indicator, only if one or more errors are present (
  • 2014 Ducati Hypermotard | Owners Manual - Page 72
    1 2 1 4 2 4 Fig 42 70
  • 2014 Ducati Hypermotard | Owners Manual - Page 73
    Customizing Riding Modes (R.MODE) This function customizes each riding style. To display this function, access the Setting Menu and select the R.MODE page. When accessing this function, the three riding modes - SPORT, TOURING and URBAN - will be displayed. The ALL DEFAULT function will also be
  • 2014 Ducati Hypermotard | Owners Manual - Page 74
    1 2 1 4 2 4 Fig 43 72
  • 2014 Ducati Hypermotard | Owners Manual - Page 75
    To customize parameters, select the riding mode you wish to edit and press button (4). Customizable parameters are DTC (Ducati Traction Control), ABS (Antilock Braking System) and ENGINE (engine power). Use buttons (1) and (2) to select the parameter you wish to customize. All edited (customized)
  • 2014 Ducati Hypermotard | Owners Manual - Page 76
    1 2 1 1 4 4 2 Fig 44 74
  • 2014 Ducati Hypermotard | Owners Manual - Page 77
    DTC set up This function allows customizing DTC (Ducati Traction Control) intervention level and, if necessary, disabling it. To display this function, access the Setting Menu and select the R.MODE page. Use buttons (1) and (2) to select the riding mode you wish to edit, then press button (4). Use
  • 2014 Ducati Hypermotard | Owners Manual - Page 78
    1 4 4 4 1 4 2 2 1 1 Fig 45 76
  • 2014 Ducati Hypermotard | Owners Manual - Page 79
    The following table indicates the most suitable level of DTC intervention for the various riding types as well as the default settings in the "Riding Modes" that can be selected by the rider: DTC LEVEL 1 RIDING MODE TRACK Professional USE DEFAULT? Track use for very experi- NO enced riders. System
  • 2014 Ducati Hypermotard | Owners Manual - Page 80
    Tips on how to select the sensitivity level Attention The 8 level settings of the DTC were calibrated using tires of the same make, model and size as those originally fitted on the motorcycle. Using tires of a different size from the original tires may alter the operating characteristics of the
  • 2014 Ducati Hypermotard | Owners Manual - Page 81
    The choice of level setting depends greatly on the grip conditions of the track/circuit (see below, tips for use on the track and on the road). The relation of the DTC intervention level to the circuit characteristics: If all the corners on the track/circuit can be taken at a similar speed, it will
  • 2014 Ducati Hypermotard | Owners Manual - Page 82
    level 7 you cannot perceive any DTC intervention, switch to level 8). 80
  • 2014 Ducati Hypermotard | Owners Manual - Page 83
    ABS set up This Function allows customization of the ABS (Antilock Braking System) level as well as its disabling. To display this function, access the Setting Menu and select the R.MODE page. Use buttons (1) and (2) to select the riding mode you wish to edit, then press button (4). Use keys (1) and
  • 2014 Ducati Hypermotard | Owners Manual - Page 84
    1 4 4 4 1 4 2 2 1 1 Fig 46 82
  • 2014 Ducati Hypermotard | Owners Manual - Page 85
    The following table indicates the most suitable level of ABS intervention for the various riding types, as well as the default settings in the "Riding Mode" that can be selected by the rider: LEVEL OFF 1 SPORT STYLE USE The ABS is disabled. For road use in good grip conditions. Under this mode, ABS
  • 2014 Ducati Hypermotard | Owners Manual - Page 86
    Tip on how to select the sensitivity level Attention The ABS system levels of your vehicle were calibrated using the same tires as those originally supplied with your motorcycle. If tires of a different size class are used or if the tire characteristics differ significantly from the original ones,
  • 2014 Ducati Hypermotard | Owners Manual - Page 87
    ENGINE set up This function customizes ENGINE power and output. To display this function, access the Setting Menu and select the "R.MODE" page. Use buttons (1) and (2) to select the riding mode you wish to edit, then press button (4). Use keys (1) and (2) to select the "ENGINE" indicator, then press
  • 2014 Ducati Hypermotard | Owners Manual - Page 88
    1 4 4 4 1 4 2 2 1 1 Fig 47 86
  • 2014 Ducati Hypermotard | Owners Manual - Page 89
    ALL DEFAULT (Resetting the default parameters of all Riding Modes) This function allows restoring all Ducati setup parameters for SPORT, TOURING and URBAN Riding Modes. To display this function, access the Setting Menu and select the "R.MODE" page. Use buttons (1) and (2) to select the "ALL DEFAULT"
  • 2014 Ducati Hypermotard | Owners Manual - Page 90
    1 4 1 4 1 4 2 2 1 1 Fig 48 88
  • 2014 Ducati Hypermotard | Owners Manual - Page 91
    DEFAULT (Resetting the default parameters of a single Riding Mode) This function allows restoring all Ducati setup parameters for a single Riding Mode. To display this function, access the Setting Menu and select the "R.MODE" page. Use buttons (1) and (2) to select the riding mode for which you wish
  • 2014 Ducati Hypermotard | Owners Manual - Page 92
    1 1 1 4 1 4 2 1 Fig 49 90
  • 2014 Ducati Hypermotard | Owners Manual - Page 93
    Dashboard backlighting setting function (B.LIGHT) This function adjusts the instrument panel backlighting intensity. To display the function, enter the "setting" menu and access the "B.LIGHT" page. The information will be displayed as follows: the tick (V) indicates that the setting is currently
  • 2014 Ducati Hypermotard | Owners Manual - Page 94
    1 4 1 1 1 4 2 1 Fig 50 92
  • 2014 Ducati Hypermotard | Owners Manual - Page 95
    Lap time function (LAP): LAP activation/ deactivation function This function activates and deactivates the LAP function (lap time). To display the function, enter the "setting" menu and access the "LAP" page. The information will be displayed as follows: the tick (V) indicates that the setting is
  • 2014 Ducati Hypermotard | Owners Manual - Page 96
    1 1 4 1 1 4 2 3 1 Fig 51 94
  • 2014 Ducati Hypermotard | Owners Manual - Page 97
    Lap time function (LAP): LAP registration This function is used to describe how lap times (LAP) are stored. If function is enabled, lap time can be stored as follows: after the first time you press button (3) the first lap counter is started and the instrument panel displays the "START LAP"
  • 2014 Ducati Hypermotard | Owners Manual - Page 98
    3 3 Fig 52 96
  • 2014 Ducati Hypermotard | Owners Manual - Page 99
    Funzione Tempo sul giro (LAP): stored LAP display This function displays the stored LAPs. To display the function, enter the "setting" menu and access the "LAP" page. Use buttons (1) and (2) to highlight the "LAP DATA" indicator, then press button (4). The instrument panel will display the
  • 2014 Ducati Hypermotard | Owners Manual - Page 100
    Note The MAX stored speed is reached during lap (increased by 5%). Note If MAX speed reading exceeds 186 mph (299 Km/h) while the information is stored, actual speed reading is displayed (example: 316 Km/h). Note If no lap times are saved in memory, the 30 lap times will be displayed as 0'00''00,
  • 2014 Ducati Hypermotard | Owners Manual - Page 101
    To display other stored lap times, press buttons (1) and (2) to highlight NEXT (or PREV), then press button (4); each time you press button (4) the next lap will be displayed. To erase all stored lap times, highlight the ERASE indicator and keep button (4) pressed for 3 seconds. Note If the stored
  • 2014 Ducati Hypermotard | Owners Manual - Page 102
    2 4 1 1 4 1 4 2 4 Fig 55 100
  • 2014 Ducati Hypermotard | Owners Manual - Page 103
    Clock setting function (CLOCK) This function allows setting the clock. To display this function, access the Setting Menu and select the "CLOCK" page. To access the setting page, keep button (4) pressed for 3 seconds. After this time, the "SETTING..." indicator will be enabled to confirm that the
  • 2014 Ducati Hypermotard | Owners Manual - Page 104
    4 2 3 4 2 4 4 2 4 2 Fig 56 102
  • 2014 Ducati Hypermotard | Owners Manual - Page 105
    Battery voltage function (BATTERY) Thanks to this function it is possible to check vehicle battery condition. To display the function, enter the "setting" menu and access the "BATT" page. The information will be displayed as follows: if battery voltage is between 11.8 and 14.9 Volt the reading will
  • 2014 Ducati Hypermotard | Owners Manual - Page 106
    Engine rpm digital indication (RPM) This function displays the number of RPM for improved accuracy when setting idle rpm. To display the function, enter the "setting" menu and access the "RPM" page. The display shows the numerical value of the RPM with a precision of 50 rpm. Fig 58 104
  • 2014 Ducati Hypermotard | Owners Manual - Page 107
    Immobilizer code (PIN CODE) This function makes it possible to temporarily turn on the motorcycle if the Immobilizer System is not working. Attention The motorcycle owner must activate (store) the PIN code; if there is already a stored PIN, contact an Authorized Ducati Dealer to have the function "
  • 2014 Ducati Hypermotard | Owners Manual - Page 108
    4 4 Fig 59 106
  • 2014 Ducati Hypermotard | Owners Manual - Page 109
    PIN activation This function allows activating your own PIN CODE to start the vehicle even if the Immobilizer system is malfunctioning. To display this function, access the Setting Menu and select the "PIN" page. Once PIN code is entered, the "MEMORY" indicator will be automatically highlighted. To
  • 2014 Ducati Hypermotard | Owners Manual - Page 110
    4 2 2 2 4 2 4 1 4 4 2 2 4 Fig 60 108
  • 2014 Ducati Hypermotard | Owners Manual - Page 111
    Changing the PIN CODE This function changes your four number PIN CODE. To display this function, access the Setting Menu and select the "PIN" page. - Note If "INSERT NEW PIN" and the dashes "- - - -" appear when accessing this function, this means that the function was not active as the PIN CODE
  • 2014 Ducati Hypermotard | Owners Manual - Page 112
    4 2 2 2 4 2 4 4 4 2 4 4 4 2 Fig 61 110
  • 2014 Ducati Hypermotard | Owners Manual - Page 113
    Entering the new PIN code (NEW PIN): each time you press button (2), the highlighted number increases from 0 to 9 and back to 0, press button (4) to confirm; repeat this procedure until entering the fourth digit. Press button (4) again to confirm. Once the fourth digit has been entered, the "MEMORY
  • 2014 Ducati Hypermotard | Owners Manual - Page 114
    2 2 4 2 4 2 4 1 4 2 4 4 2 Fig 62 112
  • 2014 Ducati Hypermotard | Owners Manual - Page 115
    The Immobilizer system For improved anti-theft protection, the motorcycle is equipped with an IMMOBILIZER, an electronic system that inhibits engine operation whenever the ignition switch is turned off. Housed in the handgrip of each ignition key is an electronic device that modulates an output
  • 2014 Ducati Hypermotard | Owners Manual - Page 116
    Keys The owner receives 2 keys B (BLACK) with the vehicle. These keys contain the "immobilizer system code". The black keys (B) are regular ignition keys and are used to: start up the engine. open the fuel tank filler plug. open the seat lock. B 1 Attention Separate the keys and use only one of
  • 2014 Ducati Hypermotard | Owners Manual - Page 117
    Entering PIN CODE function for vehicle release This function provides vehicle temporary starting in the event of an engine lock due to the Immobilizer system malfunctioning. If upon Key-On an Immobilizer ERROR is present, the instrument panel will automatically enable the PIN entering function.
  • 2014 Ducati Hypermotard | Owners Manual - Page 118
    2 4 2 4 4 2 4 1 2 4 4 2 Fig 64 116
  • 2014 Ducati Hypermotard | Owners Manual - Page 119
    (5). Note The vehicle can be started until a Key-Off is performed; if the problem still persists upon the next starting attempt, repeat the procedure from the beginning in order start the vehicle, contact an Authorized Ducati Service Center as soon as possible to fix the problem. Fig 65 117
  • 2014 Ducati Hypermotard | Owners Manual - Page 120
    function. Refer to the PIN code Entering procedure to unlock the vehicle. If the other key does not work out either, contact the Ducati Service network. 5 Fig 66 Attention Any important shock might damage the electronic components fitted into the key. Use only one key during the procedure
  • 2014 Ducati Hypermotard | Owners Manual - Page 121
    Duplicate keys If you need any duplicate keys, contact the Ducati Service network with all the keys you have left. The Ducati Service Center will program all the new keys as well as any keys you already have. You may be asked to provide proof that you are
  • 2014 Ducati Hypermotard | Owners Manual - Page 122
    Headlight control This function allows you to reduce current consumption from the battery by automatically managing headlight switching-off. At Key-On, the high beam and low beam lights are off. As soon as engine is started, low beams will be automatically turned on; from now on, "standard"
  • 2014 Ducati Hypermotard | Owners Manual - Page 123
    After activating one of the two turn indicators, they can be deactivated using the reset button (4). If the turn indicator is not "reset" manually, the instrument panel will automatically switch it off after the motorcycle has traveled 0.3 miles (500 m) from the time the turn indicator was activated
  • 2014 Ducati Hypermotard | Owners Manual - Page 124
    , the 4 turn indicators will stay on even if rider turns the key Off. They will turn off automatically after 120 minutes (2 hours), unless the rider "manually" turns them off earlier thereby stopping the automatic countdown. 122
  • 2014 Ducati Hypermotard | Owners Manual - Page 125
    Units of measurement modification function (UNITS) This function allows you to change the units of measurement of the displayed values. To display this function, access the Setting Menu and select the "UNITS" page. The instrument panel displays the values that can be changed (Speed, Temperature or
  • 2014 Ducati Hypermotard | Owners Manual - Page 126
    1 1 4 1 1 4 2 1 Fig 70 124
  • 2014 Ducati Hypermotard | Owners Manual - Page 127
    Setting (SPEED) This function allows changing the units of measurement of the following indicators: Vehicle speed, Odometer, Trip 1, Trip2, Trip Fuel (when active) and Average Speed. Once the "SPEED" indicator is selected, press button (4). The instrument panel will display the Unit of measurement
  • 2014 Ducati Hypermotard | Owners Manual - Page 128
    1 4 4 1 1 4 2 1 Fig 71 126
  • 2014 Ducati Hypermotard | Owners Manual - Page 129
    Setting (TEMPERATURE) This function allows changing the units of measurement of the following indicators: Engine coolant temperature and Air Temperature. Once the "TEMPERATURE" indicator is selected, press button (4). The instrument panel will display the Unit of measurement being used. Press
  • 2014 Ducati Hypermotard | Owners Manual - Page 130
    1 1 4 1 1 4 2 1 Fig 72 128
  • 2014 Ducati Hypermotard | Owners Manual - Page 131
    Setting (CONSUMPTION) This function allows changing the units of measurement of the following indicators: Average Consumption and Instantaneous Consumption. Once the "CONSUMPTION" indicator is selected, press button (4). The instrument panel will display the Unit of measurement being used. Press
  • 2014 Ducati Hypermotard | Owners Manual - Page 132
    1 1 4 1 1 4 2 1 Fig 73 130
  • 2014 Ducati Hypermotard | Owners Manual - Page 133
    Setting (DEFAULT) This function allows setting the "DEFAULT" units of measurement based on vehicle version. Select the "DEFAULT" indicator with buttons (1) and (2), then keep button (4) pressed for 3 seconds. Now the "DEFAULT" wording will be replaced by the "PLEASE WAIT..." indicator, which will be
  • 2014 Ducati Hypermotard | Owners Manual - Page 134
    DEFAULT based on vehicle version TOT, TRIP1, TRIP2 SPEED AVERAGE T_ENGINE TRIP FUEL SPEED T_AIR Europe UK USA Canada France Japan Brazil Taiwan China km miles miles km km km km km km km/h mph mph km/h km/h km/h km/h km/h km/h °C °C °F °C °C °C °C °C °C INSTANTANEOUS CONSUMPTION AVERAGE CONSUMPTION
  • 2014 Ducati Hypermotard | Owners Manual - Page 135
    Heated Grip control function (Accessory) This function allows enabling and adjusting heated grips. To open heated grips "H.GRIPS" control menu, press button (5) on RH switch. Control button (5) (Start button) will be used to control heated grips when engine is started, only. Once menu is enabled,
  • 2014 Ducati Hypermotard | Owners Manual - Page 136
    Once the desired heat level is selected, do not further press button (5); after 3 seconds the instrument panel will automatically quit this function and the last condition will be stored. Attention If heated grips are used at ambient temperatures above +60° ÷ +70° F (15° ÷ 20° C), heat will be
  • 2014 Ducati Hypermotard | Owners Manual - Page 137
    Controls 4 3 1 2 Position of motorcycle controls Attention This section shows the position and function of the controls used to ride the motorcycle. Be sure to read this information carefully before you use the controls. 1) Instrument Panel. 2) Key-operated ignition switch and steering lock. 3) LH
  • 2014 Ducati Hypermotard | Owners Manual - Page 138
    Key-operated ignition switch and steering lock It is located in front of the fuel tank and has four positions: A) ON: enables lights and engine operation; B) OFF: disables lights and engine operation; C) LOCK: the steering is locked; D) P: parking light on and steering locked. B A C D Note To
  • 2014 Ducati Hypermotard | Owners Manual - Page 139
    Left-hand switch 1) dip switch, two-position light selector switch: position = low beam on (A); position = high beam on (B); Button = high-beam flasher (FLASH) and instrument panel control (C). Button = three-position turn indicator: central position = off; = left turn; position position = right
  • 2014 Ducati Hypermotard | Owners Manual - Page 140
    Clutch lever Lever (1) disengages the clutch. When the clutch lever (1) is operated, drive from the engine to the gearbox and the drive wheel is disengaged. Using the clutch properly is essential to smooth riding, especially when moving off. Important Using the clutch properly will avoid damage to
  • 2014 Ducati Hypermotard | Owners Manual - Page 141
    Clutch control free play adjustment A 2 Attention A wrong adjustment can seriously affect the clutch operation and life. The clutch cable can be tight due to wearing. Check free play each time before using the vehicle. Make sure the engine is cold before checking. By engaging clutch lever a very
  • 2014 Ducati Hypermotard | Owners Manual - Page 142
    wearing, the adjuster (2) on the lever MUST NEVER be loosened but tightened, as explained above. If the slipping remains, go to a Ducati Dealer or Authorized Service Center. Fig 82 3 Fig 83 140
  • 2014 Ducati Hypermotard | Owners Manual - Page 143
    Right-hand switch 1) Red ON/OFF switch. 2) Black ENGINE START button. The switch (1) has three positions: A) center: RUN OFF. In this position, the engine cannot be started and all electronic devices are off. B) pushed down: ON/OFF. In this position, the system can be turned on (Key-On) and off (Key
  • 2014 Ducati Hypermotard | Owners Manual - Page 144
    Throttle twistgrip The twistgrip (1) on the right handlebar opens the throttles. When released, it will spring back to the initial position (idling speed). 1 Fig 86 142
  • 2014 Ducati Hypermotard | Owners Manual - Page 145
    Front brake lever Pull in the lever (1) towards the twistgrip to operate the front brake. The system is hydraulically operated and you just need to pull the lever gently. The control lever features a dial adjuster (2) for lever distance from the twistgrip on handlebar adjustment. To adjust it, keep
  • 2014 Ducati Hypermotard | Owners Manual - Page 146
    Rear brake pedal Push down the pedal (1) to operate the rear brake. The system is hydraulically operated. 1 Fig 88 144
  • 2014 Ducati Hypermotard | Owners Manual - Page 147
    Gear change pedal When released, the gear change pedal automatically returns to rest position N in the center. This is indicated by the instrument panel light N coming on. The pedal can be moved: down = press down the pedal to engage the 1st gear and to shift down. The N light will go out; upwards=
  • 2014 Ducati Hypermotard | Owners Manual - Page 148
    Adjusting the position of the gearchange and rear brake pedals The position of the gearchange and rear brake pedals in relation to the footrests can be adjusted to suit the requirements of the rider. Adjust the pedals as follows: 1 2 3 5 4 Gear change pedal Use an open ended spanner to hold
  • 2014 Ducati Hypermotard | Owners Manual - Page 149
    Rear brake pedal Loosen counter nut (7). Turn pedal stroke adjusting screw (6) until pedal is in the desired position. Tighten the counter nut (7). Operate the pedal by hand to check that there is 0.06÷0.08 in (1.5÷2 mm) of free play before the brake bites. If not, adjust the length of the master
  • 2014 Ducati Hypermotard | Owners Manual - Page 150
    Main components and devices Position on the vehicle 1) Fuel tank plug. 2) Seat lock. 3) Side stand. 4) Rear-view mirrors. 5) Rear shock absorber adjusters. 6) Catalytic converter. 7) Exhaust silencer. 4 5 4 3 2 6 7 4 1 Fig 93 148
  • 2014 Ducati Hypermotard | Owners Manual - Page 151
    Opening Tank filler plug Insert the key into the lock. Turn the key clockwise 1/4 turn to unlock. Unscrew the plug (1). Closing Tighten the plug (1) with the key inserted and push it down into its seat. Turn the key counterclockwise to the initial position and remove it. Note The plug can only be
  • 2014 Ducati Hypermotard | Owners Manual - Page 152
    Opening Seat lock 2 Insert the key (1) into the lock, turn it clockwise and simultaneously apply downward pressure in the area of the bolt to release the pin. Pull the seat (2) backwards to release it from the front catches. Closing Make sure all parts are correctly arranged and secured in the
  • 2014 Ducati Hypermotard | Owners Manual - Page 153
    While holding the rear end of the seat (2), insert the central fixing point by pushing on it. Push the rear end of the seat (2) until you hear the bolt in the lock click into place. Make sure that the seat is firmly secured to the frame and remove the key (1) from the lock. Fig 98 2 1 Fig 99 151
  • 2014 Ducati Hypermotard | Owners Manual - Page 154
    Helmet cable Remove the seat as described in paragraph "Seat lock page 150" . Remove the cable (1) from the seat. Pass the cable (1) through the helmet and insert one end of the cable in the frame pins (2) as shown in the figure. Leave the helmet hanging and refit the seat to hold it in place. 1
  • 2014 Ducati Hypermotard | Owners Manual - Page 155
    Insert the other end of the cable (1) in the pins (2). The correct position of the cable (1) ends in the pins (2) is shown in (Fig 103). 2 1 Fig 102 2 1 1 Fig 103 153
  • 2014 Ducati Hypermotard | Owners Manual - Page 156
    the motorcycle to the right while lifting the thrust arm (1) with your foot. 2 1 Fig 104 Attention Do not sit on the motorcycle when it is supported on the side stand. Note Check for proper operation of the stand mechanism (two springs, one into the other) and the safety sensor (2) at regular
  • 2014 Ducati Hypermotard | Owners Manual - Page 157
    Adjusting the rear shock absorber The rear shock absorber has commands that enable you to adjust the setting to suit the load on the motorcycle. The adjuster (1), located on the swingarm, controls rebound damping. Turn the adjuster (1) clockwise to increase damping, or counter-clockwise to reduce
  • 2014 Ducati Hypermotard | Owners Manual - Page 158
    Attention Use a specific pin wrench to turn the preload adjusting nut. Be careful when turning the nut with the wrench, as the pin may slip out of the ring nut recess and you may hurt your hand hitting motorcycle parts. Attention The shock absorber is filled with gas under pressure and may cause
  • 2014 Ducati Hypermotard | Owners Manual - Page 159
    Riding the motorcycle Break-in recommendations Maximum rpm Rotation speed for Break-in period and during standard use (rpm): 1) Up to 600 mi (1000 km); 2) 600 mi (1000 km) to 1553 mi (2500 km). For all mechanical parts of the motorcycle to adapt to one another and above all not to adversely affect
  • 2014 Ducati Hypermotard | Owners Manual - Page 160
    the entire Break-in period, carefully observe the indications on the scheduled maintenance chart and servicing recommendations in the Warranty Booklet. Failure to follow these instructions releases Ducati Motor Holding S.p.A. from any liability whatsoever for any engine damage or shorter engine
  • 2014 Ducati Hypermotard | Owners Manual - Page 161
    Pre-ride checks - Attention Failure to carry out these checks before riding may lead to motorcycle damage and injury to rider and passenger. Before riding, perform a thorough check-up on your bike as follows: FUEL LEVEL IN THE TANK Check the fuel level in the tank. Fill tank if needed (page 159).
  • 2014 Ducati Hypermotard | Owners Manual - Page 162
    off to indicate the correct operation of the ABS. Attention In case of malfunction, do not ride the motorcycle and contact a Ducati Dealer or Authorized Service Center. Fig 108 160
  • 2014 Ducati Hypermotard | Owners Manual - Page 163
    ABS Check that the front (1) and rear (2) phonic wheels are clean. 1 Attention Clogged reading slots would compromise system proper operation. It is advisable to disable ABS in case of a very muddy road surfaces, as in these conditions the system might be subject to sudden failure. Attention
  • 2014 Ducati Hypermotard | Owners Manual - Page 164
    Starting the motorcycle Attention Before starting the engine, become familiar with the controls you will need to use when riding. 1 Attention Never start or run the engine indoors. Exhaust gases are poisonous and may lead to loss of consciousness or even death within a short time. Move the
  • 2014 Ducati Hypermotard | Owners Manual - Page 165
    Attention The side stand must be fully up (in a horizontal position), as its safety sensor prevents engine start when down. 2 Note The engine can be started with side stand down and the gearbox in neutral. When starting the bike with a gear engaged, pull the clutch lever (in this case the side
  • 2014 Ducati Hypermotard | Owners Manual - Page 166
    Moving off 1) 2) 3) 4) 5) Disengage the clutch by squeezing the clutch lever. Push down the gear change lever firmly with the tip of your foot to engage first gear. Raise the engine revs by turning the throttle twistgrip while gradually releasing the clutch lever. The motorcycle will start moving
  • 2014 Ducati Hypermotard | Owners Manual - Page 167
    Braking Slow down in time, shift down to engine-brake first and then brake applying both brakes. Pull the clutch lever before stopping the motorcycle, to avoid sudden engine stop. ABS system Using the brakes correctly under adverse conditions is the hardest - and yet the most critical - skill to
  • 2014 Ducati Hypermotard | Owners Manual - Page 168
    Attention When ABS is disabled, the vehicle restores the standard brake system features; using the two brake controls separately reduces the motorcycle braking efficiency. Never use the brake controls harshly or suddenly as you may lock the wheels and lose control of the motorcycle. When riding in
  • 2014 Ducati Hypermotard | Owners Manual - Page 169
    Stopping the motorcycle Reduce speed, shift down and release the throttle twistgrip. Shift down to engage first gear and then neutral. Apply the brakes and bring the motorcycle to a complete stop. To switch the engine off, simply turn the key to OFF (2). 2 1 Important Never leave the key in the
  • 2014 Ducati Hypermotard | Owners Manual - Page 170
    Parking Park the stopped motorcycle on the side stand. Steer the handlebar completely to the left and bring the key to position (3) to prevent thefts. If you park in a garage or other indoor area, make sure that there is proper ventilation and that the motorcycle is not near a source of heat. You
  • 2014 Ducati Hypermotard | Owners Manual - Page 171
    Refueling Never overfill the tank when refueling. Fuel should never be touching the rim of filler recess (1). 1 Attention Use fuel with a minimum octane rating of 90 (RON+MON)/2 Attention The vehicle is compatible only with fuel having a maximum content of ethanol of 10% (E10). Using fuel with
  • 2014 Ducati Hypermotard | Owners Manual - Page 172
    Tool kit and accessories The tool kit (2) and helmet anti-theft cable are located under the seat (1). The tool kit includes: fuse pliers; 8/10 double-ended wrench; screwdriver; screwdriver handle; 0.55x0.62 in (14x16 mm) box wrench; 0.23 in (6 mm) rod; 0.11 in (3 mm) Allen wrench; 0.20 in (5 mm)
  • 2014 Ducati Hypermotard | Owners Manual - Page 173
    Main maintenance operations Check and top up the coolant level Check the coolant level in the expansion reservoir on the right-hand side of the headstock. Steer the handlebar completely to the left and check that the level is between the MIN and MAX marks on the side of the expansion reservoir. Top
  • 2014 Ducati Hypermotard | Owners Manual - Page 174
    be topped up and changed at the intervals specified in the scheduled maintenance table contained in the Warranty Booklet; please contact a Ducati Dealer or Authorized Service Center. MIN Fig 121 Important All brake and clutch lines should be changed every four years. MAX Fig 122 172
  • 2014 Ducati Hypermotard | Owners Manual - Page 175
    If you note too much play on brake lever or pedal and brake pads are still in good condition, contact your Ducati Dealer or Authorized Service Center to have the system inspected and any air drained out of the circuit. Attention Brake fluid can damage paintwork and plastic parts, so avoid
  • 2014 Ducati Hypermotard | Owners Manual - Page 176
    just one pad, is about 0.039 in (1 mm) replace both pads. MIN Attention Friction material wear beyond this limit would lead to metal support contact with the brake disc thus compromising braking efficiency, disc integrity and rider safety. Important Have the brake pads replaced at a Ducati Dealer
  • 2014 Ducati Hypermotard | Owners Manual - Page 177
    Charge the battery 1 4 Attention Have the battery removed at a Ducati Dealer or authorized Service Center. To gain access to battery, remove seat page 150. Loosen screws (1), remove the positive cable (2) and (ABS) positive cable (3) from the positive terminal and
  • 2014 Ducati Hypermotard | Owners Manual - Page 178
    Grease the screws (1). Refit the battery, connect the positive cable (2) and ABS positive cable (3) to the positive terminal and the negative cable (4) to the negative terminal of the battery, always starting from the positive (+), and fit the screws (1). 1 4 3 2 + 1 - Attention Keep the
  • 2014 Ducati Hypermotard | Owners Manual - Page 179
    Charging and maintenance of the battery during winter storage Your motorcycle is equipped with a connector (1) under the seat to which you can connect a special battery charger (2) (Battery maintainer kit part no. 69924601A - various countries; Battery maintainer kit part no. 69924601AX - for Japan,
  • 2014 Ducati Hypermotard | Owners Manual - Page 180
    Important If battery minimum voltage is not ensured by a suitable battery charge maintainer, sulfation may occur. This is irreversible and will lead to decreasing battery performance. Note When the motorcycle is left unused (approximately for more than 30 days). We recommend owners to use the
  • 2014 Ducati Hypermotard | Owners Manual - Page 181
    Check drive chain tension Important Have chain tension adjusted by a Ducati Dealer or Authorized Service Center. Turn the rear wheel until you find the position where chain is tightest. Set the vehicle on the side stand. With just a finger, push
  • 2014 Ducati Hypermotard | Owners Manual - Page 182
    Attention Correct tightening of swinging arm screws (1) is critical to rider and passenger safety. Important Improper chain tension will lead to rapid wear of transmission parts. 1 Fig 130 180
  • 2014 Ducati Hypermotard | Owners Manual - Page 183
    Chain lubrication The chain fitted on your motorcycle has O-rings to protect its moving parts from dirt and to hold the lubricant inside. The seals might be irreparably damaged if the chain is cleaned using any solvent other than those specific for O-ring chains or washed using steam or water
  • 2014 Ducati Hypermotard | Owners Manual - Page 184
    the headlight bulbs Important Have the bulbs replaced at a Ducati Dealer or authorized Service Center. 1 Attention The headlight might fog up if the vehicle is used under functions before reassembling removed parts. Loosen the screws (1). Slightly raise the headlight support. Fig 131 Fig 132 182
  • 2014 Ducati Hypermotard | Owners Manual - Page 185
    Release the headlight support from rubber pads (A). Ease off the headlight support towards the front until releasing the twistgrip (2). Unscrew the twistgrip (2) turning counterclockwise. A Fig 133 2 Fig 134 183
  • 2014 Ducati Hypermotard | Owners Manual - Page 186
    Disconnect connector (3). Release the clip (4). The bulb (5) is of the banjo-type: press and rotate counterclockwise to remove. Fit the spare bulb by pressing and turning clockwise until it clicks. 3 Note Be careful to hold the new bulb at the base only. Never touch the transparent body with your
  • 2014 Ducati Hypermotard | Owners Manual - Page 187
    Replace the turn indicator bulbs To change the front/rear turn indicator bulbs, loosen the screw (1) and remove the lens (2). 2 1 Fig 137 1 2 Fig 138 185
  • 2014 Ducati Hypermotard | Owners Manual - Page 188
    Number plate light To access the bulb in the number plate light open the number plate lens (1), pull the bulb (2) out of the holder and replace it. 1 Fig 139 1 186 2 Fig 140
  • 2014 Ducati Hypermotard | Owners Manual - Page 189
    Beam setting Note The headlight features a double beam adjustment, one for the right beam and one for the left beam To check the headlight aim, place the motorcycle upright with the tires inflated to the correct pressure and one person sitting astride the motorcycle. The motorcycle should be
  • 2014 Ducati Hypermotard | Owners Manual - Page 190
    Headlight adjustment Turn the screw (1) to set beam width. Turn the screw (2) to set beam height. 1 Important Headlight adjusting screws have no limit stop. Attention The headlight might fog up if the vehicle is used under the rain or after washing. Switch headlight on for a short time to dry up
  • 2014 Ducati Hypermotard | Owners Manual - Page 191
    Adjust rear-view mirrors Manually adjust the rear-view mirror (A) until reaching the desired position. A Fig 144 189
  • 2014 Ducati Hypermotard | Owners Manual - Page 192
    , increase tire pressure by 0.2÷0.3 bar to preserve the roundness of the front rim. Note Have the tires replaced at a Ducati Dealer or Authorized Service Center. Correct removal and installation of the wheels is essential. Some parts of the ABS (such as sensors and phonic wheels) are mounted to
  • 2014 Ducati Hypermotard | Owners Manual - Page 193
    Minimum tread depth Measure tread depth (S,Fig 145) at the point where tread is most worn down: It should not be less than 0.08 in (2 mm), and in any case not less than the legal limit. S Important Visually inspect the tires at regular intervals for cracks and cuts, especially on sidewalls, bulges
  • 2014 Ducati Hypermotard | Owners Manual - Page 194
    up until the oil reaches the required level. Refit the plug. Important Engine oil and oil filters must be changed by a Ducati Dealer or Authorized Service Center at the intervals specified in the scheduled maintenance chart contained in the Warranty Booklet. 1 Fig 146 192
  • 2014 Ducati Hypermotard | Owners Manual - Page 195
    Viscosity SAE 15W-50 The other viscosity degrees indicated in the table can be used if the local average temperature is within the limits specified for that oil viscosity. 10W 20W Unigrade 20 30 40 20W-40 20W-50 15W-40 15W-50 10W-40 10W-30 -10 0 10 20 30 40 C M ultigrade Fig 147 193
  • 2014 Ducati Hypermotard | Owners Manual - Page 196
    Clean and replace the spark plugs Spark plugs are essential to smooth engine running and should be checked at regular intervals. Have the spark plug replaced at a Ducati Dealer or authorized Service Center. Fig 148 194
  • 2014 Ducati Hypermotard | Owners Manual - Page 197
    biodegradable products. Avoid harsh detergents or solvents. Only use water and neutral soap to clean the Plexiglas and the seat. Periodically manually clean all aluminum components. Use special detergents, suitable for aluminum parts FREE of abrasives or caustic soda. Important Do not wash your
  • 2014 Ducati Hypermotard | Owners Manual - Page 198
    turn the engine over by hand a few times to form a protective film of oil on the inner walls of the cylinder; place the motorcycle on a service stand; disconnect and remove the battery. - 196
  • 2014 Ducati Hypermotard | Owners Manual - Page 199
    Scheduled maintenance chart List of operations and type of intervention [set mileage (km/mi) or time interval *] Scheduled maintenance chart: operations to be performed by the Dealer Km. x1000 1 15 9 30 18 45 27 60 36 mi. x1000 0,6 Time (months) 12 12 12 12 12 36 12 Reading of the error memory
  • 2014 Ducati Hypermotard | Owners Manual - Page 200
    List of operations and type of intervention [set mileage (km/mi) or time interval *] Km. x1000 1 15 9 30 18 45 27 60 36 mi. x1000 0,6 Time (months) 12 12 12 12 12 12 12 48 12 12 Check tightening of the safety components (brake disc flange screws, brake caliper screws, front/rear wheel nuts,
  • 2014 Ducati Hypermotard | Owners Manual - Page 201
    electrical devices (side stand sensor, front and rear brake switches, engine stop switch, gear/neutral sensor) Check the indicators and lighting Reset Service indication through DDS Road test of the motorcycle, testing the safety devices (ex. ABS and DTC) Softly clean the motorcycle Fill out that
  • 2014 Ducati Hypermotard | Owners Manual - Page 202
    Scheduled maintenance chart: operations to be performed by the customer List of operations and type of intervention [set mileage (km/mi) or time interval *] Check engine oil level Check brake fluid level Check tire pressure and wear Check the drive chain tension and lubrication Check brake pads. If
  • 2014 Ducati Hypermotard | Owners Manual - Page 203
    Technical data Weights Overall weight (in running order with 90% of fuel 93/93/EC): 436.5 lb (198 kg). Overall weight (without fluids and battery): 385.8 lb (175 kg). Maximum allowed weight (carrying full load): 895.1 lb ( 406 kg). Attention Failure to observe weight limits could result in poor
  • 2014 Ducati Hypermotard | Owners Manual - Page 204
    Overall dimensions 860 mm - 33.86 in 198 mm - 7 .79 in 1500 mm - 59.05 in 2100 mm - 82.68 in 870 mm - 34.25 in 1150 mm - 45.28 in Fig 149 202
  • 2014 Ducati Hypermotard | Owners Manual - Page 205
    Top-ups TOP-UPS TYPE Fuel tank, including a reserve of 1.05 gal Unleaded fuel with a minimum octane rat- 4.22 gal (16 cu. dm (liting of 90 (RON+MON)/2. (4 cu. dm (liters)) ers)) Lubrication circuit Front/rear brake and clutch circuits Protectant for electric contacts Front fork SHELL - Advance 4T
  • 2014 Ducati Hypermotard | Owners Manual - Page 206
    Engine Longitudinal 90º "L" twin cylinder, four-stroke. Bore: 3.46 in (88 mm). Stroke: 32.44 in (67.5 mm). Total displacement, cu. cm: 821.1. Compression ratio: 12.8±0.5:1 Max power at crankshaft (95/1/EC), kW/HP: 81 kW/110 HP at 9,250 rpm. Max torque at crankshaft (95/1/EC): 9.1 kgm/89 Nm at 7,750
  • 2014 Ducati Hypermotard | Owners Manual - Page 207
    Timing system DESMODROMIC with four valves per cylinder, operated by eight rocker arms and two overhead camshafts. It is operated by the crankshaft through spur gears, belt rollers and toothed belts. 6 2 1 Desmodromic timing system 1) 2) 3) 4) 5) 6) 7) Opening (or upper) rocker Opening rocker
  • 2014 Ducati Hypermotard | Owners Manual - Page 208
    reached only after a correct running-in period with the motorcycle properly serviced at the recommended intervals. Attention Vehicle is compatible only with fuels warranty null and void. Important Failure to follow these instructions will release Ducati Motor Holding S.p.A. from any liability for
  • 2014 Ducati Hypermotard | Owners Manual - Page 209
    motorcycle for competitions or special tracks, Ducati Motor Holding S.p.A. will be pleased to provide information about the special ratios available. Contact a Ducati Dealer or Authorized Service Center. 207
  • 2014 Ducati Hypermotard | Owners Manual - Page 210
    Attention If the rear sprocket needs replacing, contact a Ducati Dealer or Authorized Service Center. If improperly replaced, this component could seriously endanger your safety and that of your passenger, and cause irreparable damage to your motorcycle. Size: 120/
  • 2014 Ducati Hypermotard | Owners Manual - Page 211
    Catalytic converter built into the silencer with two Lambda sensors on the exhaust pipes at the head output. Available colors Ducati Anniversary red 473.101 (PPG); Base (Acriflex White) L0040652 (LECHLER); Lacquer (Acriplast Red Stoner SF) LMC06017 (LECHLER); Mercury Gray subframe (Powder mercury
  • 2014 Ducati Hypermotard | Owners Manual - Page 212
    parking light: 6 LEDs (0.27W -13.5V); stop light: 6 LEDs (2.43W-13.5V). Number plate light: bulb: C5W (12-5W). Note For bulb replacement instructions, please read "Replacing the high and low beam bulbs". Fuses There are thirteen fuses that protect the electric components, located inside the front
  • 2014 Ducati Hypermotard | Owners Manual - Page 213
    The front fuse box (A, Fig 151) is located on the LH side and can be accessed by removing the front LH side fairing. To expose the fuses, lift the box protective cover. Mounting position and ampere capacity are marked on box cover. The rear fuse box (B, Fig 152) is located under the seat, close to
  • 2014 Ducati Hypermotard | Owners Manual - Page 214
    Front fuse box key Pos 1 2 3 4 5 6 7 El. item Lights Instrument panel Key-1 Key-2 Key-7SM Injection Rear fuse box key Pos 1 2 3 4 5 6 El. item Key-sense Diagnosis Black Box System (BBS) ABS 1 ABS 2 Alarm Rat. 7.5 A 7.5 A 10 A 30 A 25 A 10 A Rat. 10 A 10 A 15 A 10 A 15 A 20 A 7 Rear fuse box key ECU
  • 2014 Ducati Hypermotard | Owners Manual - Page 215
    The main fuse (C), is positioned close to the rear fuse box, on the solenoid starter (D). Remove the fuse cap (E) to reach it. A blown fuse is identified by the interrupted center link (F). E Important Switch the ignition key to OFF before replacing the fuse to avoid possible short-circuits.
  • 2014 Ducati Hypermotard | Owners Manual - Page 216
    Injection /electric system diagram key 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 214 Right-hand switch Ignition system (key-operated switch) Main relay Regulator Generator Navigator Front fuse box Starter motor Fused solenoid Battery Wiring ground Data
  • 2014 Ducati Hypermotard | Owners Manual - Page 217
    Rear stop Front stop Front right turn indicator Headlight Serial line Immobilizer P Pink Note The electric system wiring diagram is at the end of this manual. Wire color coding B Blue W White V Violet Bk Black Y Yellow R Red Lb Light blue Gr Gray G Green Bn Brown O Orange 215
  • 2014 Ducati Hypermotard | Owners Manual - Page 218
    Routine maintenance record KM 1000 15000 30000 45000 60000 MI 600 9000 18000 27000 36000 Routine maintenance record DUCATI SERVICE NAME MILEAGE DATE 216
  • 2014 Ducati Hypermotard | Owners Manual - Page 219
  • 2014 Ducati Hypermotard | Owners Manual - Page 220
    Stampato 01/2014 Cod. 913.7.230.1V
  • 2014 Ducati Hypermotard | Owners Manual - Page 221
    03 07 O R/W Bk 10 Supply front Sns speed-DPV Supply rear Sns speed-DPH in Signal Speed Front-DSV in Signal Speed Rear-DSH + R Bk 30A Bk V batt 2-UBVR Diretto UBMR Key sense-UZ R/W Can HI MGnd R/Y Y/Bk R R/Y O Can Low Gnd Ecu 2 1 R/Bk Bk Y Y Y Y R R Bk B/Bk R/Bk R/W Bn R/Y R/W
  • 2014 Ducati Hypermotard | Owners Manual - Page 222
    cod. 913.7 .230.1V
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222