2013 Buick Verano Owner Manual - Page 219

Driving and Operating StabiliTrak is on automatically whenever the vehicle is started. To assist with directional control of the vehicle, the system should always be left on. If there is a problem detected with StabiliTrak, the appropriate message will be displayed on the DIC. See Ride Control System Messages on page 5￿28. When a message is displayed and/or d comes on and stays on, the vehicle is safe to drive but the system is not operational. Driving should be adjusted accordingly. If d comes on and stays on, reset the system: 1. Stop the vehicle. 2. Turn the engine off and wait 15 seconds. 3. Start the engine. If d still comes on and stays on at a speed above 20 km/h (13 mi/h), see your dealer for service. StabiliTrak Off Light 9-35 TCS/StabiliTrak Button This button is on the center stack below the infotainment system screen. TCS/StabiliTrak Light When the stability control system activates, d flashes on the instrument cluster. This also occurs when traction control is activated. A noise may be heard or vibration may be felt in the brake pedal. This is normal. Continue to steer the vehicle in the intended direction. TCS Off Light StabiliTrak can be turned off if needed by pressing and holding until g and i come on in the instrument cluster and the g