ZyXEL WAP3205 v3 User Guide

ZyXEL WAP3205 v3 Manual

Get ZyXEL WAP3205 v3 PDF manuals and user guides View all ZyXEL WAP3205 v3 manuals
Add to My Manuals
Save this manual to your list of manuals

ZyXEL WAP3205 v3 manual content summary:

  • ZyXEL WAP3205 v3 | User Guide - Page 1
    User's Guide WAP3205 v3 Wireless N300 Access Point Default Login Details LAN IP Address User Name Password http://192.168.1.2 admin 1234 Version 1.00 Edition 4, 01/2019 Copyright © 2019 Zyxel Communications Corporation
  • ZyXEL WAP3205 v3 | User Guide - Page 2
    effort has been made to ensure that the information in this manual is accurate. Related Documentation • Quick Start Guide The Quick Start Guide shows how to connect the managed device. • More Information Go to support.zyxel.com to find other information on the WAP3205 v3. WAP3205 v3 User's Guide 2
  • ZyXEL WAP3205 v3 | User Guide - Page 3
    Contents Overview User's Guide ...8 Introduction ...9 The Web Configurator ...14 Connection Wizard ...21 Modes ...33 Tutorials ...45 Technical Reference ...53 Wireless LAN ...54 LAN ...68 System ...70 Logs ...73 Tools ...75 Language ...80 Operation Mode ...81 Troubleshooting ...83 VMG3925-B10C
  • ZyXEL WAP3205 v3 | User Guide - Page 4
    Guide 8 Chapter 1 Introduction ...9 1.1 Overview ...9 1.2 Securing the WAP3205 v3 ...10 1.3 LEDs ...11 1.4 The WPS/RESET Button ...11 1.4.1 Using the WPS/RESET Setup ...22 3.4.2 Device Information ...23 3.5 Connection Wizard - Universal Repeater Mode 24 3.5.1 AP Select ...24 3.5.2 Wireless Setup
  • ZyXEL WAP3205 v3 | User Guide - Page 5
    45 5.3.1 Push Button Configuration (PBC 45 5.3.2 PIN Configuration ...46 5.4 Connecting to the WAP3205 v3's Wi-Fi Network Manually (No WPS 48 5.4.1 Configuring Wireless Security on the WAP3205 v3 49 5.4.2 Configure Your Notebook ...50 Part II: Technical Reference 53 Chapter 6 Wireless LAN
  • ZyXEL WAP3205 v3 | User Guide - Page 6
    Overview ...75 10.2 What You Can Do ...75 10.3 Firmware Upload Screen ...75 10.4 Configuration Screen ...77 10.4.1 Backup Configuration ...77 10.4.2 Restore Configuration ...78 10.4.3 Back to Factory Defaults ...79 10.5 Restart Screen ...79 Chapter 11 Language ...80 VMG3925-B10C/B30C User's Guide 6
  • ZyXEL WAP3205 v3 | User Guide - Page 7
    ...81 12.2 General Screen ...81 Chapter 13 Troubleshooting...83 13.1 Power, Hardware Connections, and LEDs 83 13.2 WAP3205 v3 Access and Login 84 13.3 Internet Access ...85 13.4 Resetting the WAP3205 v3 to Its Factory Defaults 86 13.5 Wireless Problems ...86 Appendix A IP Addresses and Subnetting
  • ZyXEL WAP3205 v3 | User Guide - Page 8
    PART I User's Guide 8
  • ZyXEL WAP3205 v3 | User Guide - Page 9
    the following connections using the WAP3205 v3: • LAN. You can connect network devices via the Ethernet ports of the WAP3205 v3 so that they can clients can connect to the WAP3205 v3 to access network resources. Figure 1 WAP3205 v3 Network You can set up the WAP3205 v3 with other IEEE 802.11b/g/n
  • ZyXEL WAP3205 v3 | User Guide - Page 10
    even crashes. If you forget your password, you will have to reset the WAP3205 v3 to its factory default settings. If you backed up an earlier configuration file, you would not have to totally re-configure the WAP3205 v3. You could simply restore your last configuration. WAP3205 v3 User's Guide 10
  • ZyXEL WAP3205 v3 | User Guide - Page 11
    is not configured or disabled. 1.4 The WPS/RESET Button Your WAP3205 v3 supports WiFi Protected Setup (WPS), which is an easy way to set manually. Each WPS connection works between two devices. Both devices must support WPS (check each device's documentation to make sure). WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 12
    , the two devices connect and set up a secure network by themselves. The WPS/RESET single button is located at the back panel of the WAP3205 v3. 1.4.1 Using the WPS/RESET Button 1 Make sure the power LED is on. 2 Press the WPS/RESET button within 3 seconds to turn on the WPS function 3 Press the WPS
  • ZyXEL WAP3205 v3 | User Guide - Page 13
    Chapter 1 Introduction Figure 3 Wall Mounting Example WAP3205 v3 User's Guide 13
  • ZyXEL WAP3205 v3 | User Guide - Page 14
    HTML-based management interface that allows easy setup and management of the WAP3205 v3 via Internet browser. Use Internet Explorer 8.0 . • JavaScript (enabled by default). • Java permissions (enabled by default). Refer to Chapter 13 Troubleshooting to see how to make sure WAP3205 v3 User's Guide 14
  • ZyXEL WAP3205 v3 | User Guide - Page 15
    Network and Sharing Center, click on Local Area Connection to access the adapter's settings. 3 After accesing the connection's general settings, click on the Properties button. WAP3205 v3 User's Guide 15
  • ZyXEL WAP3205 v3 | User Guide - Page 16
    v3, you must remember to change your static IP back to automatic to be able to access the Internet. If you want to change the IP address to automatic (default) then repeat steps 1 to 4, for step 5 select the Obtain an IP address automatically radio button, and click OK. WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 17
    + button to add a new profile, in this case it is called Static IP. This will easily help you change from static IP address to automatic. WAP3205 v3 User's Guide 17
  • ZyXEL WAP3205 v3 | User Guide - Page 18
    make sure it is selected, then click on the Configure IPv4 scroll button and select Manually. Then modify your IP Address, your computer must be in the same subnet in on page 14). 4 Type admin (default) as the user name and 1234 (default) as the password and click Login. WAP3205 v3 User's Guide 18
  • ZyXEL WAP3205 v3 | User Guide - Page 19
    change the password this time. Figure 5 Change Password Screen Note: The management session automatically times out when the time period set in the Administrator Inactivity Timer field expires (default five minutes). Simply log back into the WAP3205 v3 if this happens. 6 Select the setup type you
  • ZyXEL WAP3205 v3 | User Guide - Page 20
    Configurator Figure 6 Selecting the setup mode 2.4 Resetting the WAP3205 v3 If you forget your password or IP address, or you cannot access the Web Configurator, you will need to use the WPS/RESET button at the back of the WAP3205 v3 to reload the factory-default configuration file. This means that
  • ZyXEL WAP3205 v3 | User Guide - Page 21
    Operation Mode The WAP3205 v3 offers three different system operation modes: Access Point mode, Universal Repeater mode and Client Bridge mode. To learn more about each mode refer to Chapter 4 on page 33. When you click on the Wizard Setup the following screen opens. WAP3205 v3 User's Guide 21
  • ZyXEL WAP3205 v3 | User Guide - Page 22
    is set to access point mode by default. In this mode your WAP3205 v3 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. 3.4.1 WLAN Setup The following screen will open. Use this screen to configure the WAP3205 v3's wireless network settings. Figure 9 Connection Wizard - Access
  • ZyXEL WAP3205 v3 | User Guide - Page 23
    . Pre-Shared Key Enter the password that lets you connect to the WAP3205 v3. Your password should be in a string of ASCII characters between 8 and 63 or hexadecimal characters between 8 and 64. Apply Click Apply to save the changes to your WAP3205 v3. Reset Click Reset to reload the previous
  • ZyXEL WAP3205 v3 | User Guide - Page 24
    IEEE 802.11 standard that the WAP3205 v3 supports. Wireless clients must support the same standard in order to be able to connect to the WAP3205 v3. - WPS This displays Configured when the WPS (Wi-Fi Protected Setup) has been set up. Run Wizard setup again Go to advanced settings This displays
  • ZyXEL WAP3205 v3 | User Guide - Page 25
    choose the wireless device your WAP3205 v3 will connect to. SSID This displays Service Set IDentity of the wireless Setup After you click Connect the following screen will open. Use this screen to enter the Wi-FI key if wireless security is enabled on the selected AP. WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 26
    > Wireless Setup LABEL DESCRIPTION Wireless Setup Name (SSID) This shows the descriptive name of the wireless device you want the WAP3205 v3 to connect to. Security Mode This shows the type of security configured on the wireless device. Shared Key Type the wireless device's password to
  • ZyXEL WAP3205 v3 | User Guide - Page 27
    . Pre-Shared Key Enter the password that lets you connect to the WAP3205 v3. Your password should be in a string of ASCII characters between 8 and 63 or hexadecimal characters between 8 and 64. Apply Click Apply to save the changes to your WAP3205 v3. Reset Click Reset to reload the previous
  • ZyXEL WAP3205 v3 | User Guide - Page 28
    This is the current firmware version of the WAP3205 v3. LAN Information - MAC Address This shows the LAN Ethernet adapter MAC Address of your device. - IP Address This shows the LAN port's IP Address. - IP Subnet Mask This shows the LAN port's IP Subnet Mask. - DHCP Server This shows the
  • ZyXEL WAP3205 v3 | User Guide - Page 29
    the selected AP. Click here to run the Wizard setup one more time. Click here to go to your WAP3205 v3's advanced settings. 3.6 Connection Wizard - Client Bridge Mode The WAP3205 v3's system operation mode is now Client Bridge, your WAP3205 v3 can act as a wireless client to connect to an existing
  • ZyXEL WAP3205 v3 | User Guide - Page 30
    Setup The following table describes the labels in this screen. Table 11 Connection Wizard - Universal Repeater> Wireless Setup LABEL DESCRIPTION Wireless Setup Name (SSID) This shows the descriptive name of the wireless device you want the WAP3205 v3 to connect to. WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 31
    This is the current firmware version of the WAP3205 v3. LAN Information - MAC Address This shows the LAN Ethernet adapter MAC Address of your device. - IP Address This shows the LAN port's IP Address. - IP Subnet Mask This shows the LAN port's IP Subnet Mask. - DHCP Server This shows the
  • ZyXEL WAP3205 v3 | User Guide - Page 32
    Chapter 3 Connection Wizard Table 12 Connection Wizard - Client Bridge> Device Information LABEL DESCRIPTION Run Wizard setup again Click here to run the Wizard setup one more time. Go to Advanced setup Click here to go to your WAP3205 v3's advanced settings. WAP3205 v3 User's Guide 32
  • ZyXEL WAP3205 v3 | User Guide - Page 33
    to avoid having to change it later. The WAP3205 v3 automatically restarts when you change modes. • Access wireless connections on the WAP3205 v3. Figure 18 AP Mode LEW • Universal Repeater: In this mode, the WAP3205 v3 (N) can be an WAP3205 v3 (N) to wirelessly relay communications from its wireless
  • ZyXEL WAP3205 v3 | User Guide - Page 34
    WAP3205 v3 to AP Mode 1 Connect your computer to the LAN port of the WAP3205 v3. 2 The default LAN IP address of the WAP3205 v3 is 192.168.1.2. The WAP3205 v3 the WAP3205 v3 as the web address in your web browser. 4 Log into the Web Configurator. See the Chapter 2 on page 14 for instructions on how
  • ZyXEL WAP3205 v3 | User Guide - Page 35
    connection. - Security Mode This shows the data encryption method the WAP3205 v3 uses. - 802.11 Mode This shows the IEEE 802.11 standard that the WAP3205 v3 supports. Wireless clients must support the same standard in order to be able to connect to the WAP3205 v3. WAP3205 v3 User's Guide 35
  • ZyXEL WAP3205 v3 | User Guide - Page 36
    when the WPS (Wi-Fi Protected Setup) has been set up. System Status the WAP3205 v3 has been on. This field displays your WAP3205 v3's present date and time. This displays the WAP3205 v3 the WAP3205 v3. 4.2.2 AP Navigation Panel Use the menu in the navigation panel to configure WAP3205 v3 features
  • ZyXEL WAP3205 v3 | User Guide - Page 37
    the categories that you selected. Use this screen to upload firmware to your WAP3205 v3. Use this screen to backup and restore the configuration or reset the factory defaults to your WAP3205 v3. This screen allows you to reboot the WAP3205 v3 without turning the power off. This screen allows you to
  • ZyXEL WAP3205 v3 | User Guide - Page 38
    mode. Note: Wait while the WAP3205 v3 restarts, then log in to the Web Configurator again. 4.3.1 Status Screen (Universal Repeater Mode) Click on Status. The screen below shows the status screen in Universal Repeater mode. Figure 23 Status Screen (Universal Repeater Mode) WAP3205 v3 User's Guide 38
  • ZyXEL WAP3205 v3 | User Guide - Page 39
    port's DHCP server. This shows the wireless adapter MAC Address of your device. This shows the current status of the Wireless LAN - Enabled or Disabled. This shows a descriptive SSID name used to identify the WAP3205 v3 in the wireless LAN. This shows the channel number which you select manually or
  • ZyXEL WAP3205 v3 | User Guide - Page 40
    the status of the WAP3205 v3. 4.3.2 Universal Repeater Navigation Panel Use the menu in the navigation panel to configure WAP3205 v3 features in Universal Repeater Mode LINK TAB FUNCTION Status This screen shows the WAP3205 v3's general device, system and interface status information. Use
  • ZyXEL WAP3205 v3 | User Guide - Page 41
    the categories that you selected. Use this screen to upload firmware to your WAP3205 v3. Use this screen to backup and restore the configuration or reset the factory defaults to your WAP3205 v3. This screen allows you to reboot the WAP3205 v3 without turning the power off. This screen allows you to
  • ZyXEL WAP3205 v3 | User Guide - Page 42
    Client Bridge mode. Note: Wait while the WAP3205 v3 restarts, then log in to the Web Configurator again. 4.4.1 Status Screen (Client Bridge Mode) Click on Status. The screen below shows the status screen in Client Bridge mode. Figure 25 Status Screen (Client Bridge Mode) WAP3205 v3 User's Guide 42
  • ZyXEL WAP3205 v3 | User Guide - Page 43
    purposes. This is the current firmware version of the WAP3205 v3. This shows the LAN Ethernet DHCP server. This is the name of the selected AP that the WAP3205 v3 is associating with. This shows the wireless security the WAP3205 v3 is using to connect to the AP. This shows whether the WAP3205 v3
  • ZyXEL WAP3205 v3 | User Guide - Page 44
    that you selected. Tools Firmware Use this screen to upload firmware to your WAP3205 v3. Configuration Use this screen to backup and restore the configuration or reset the factory defaults to your WAP3205 v3. Restart This screen allows you to reboot the WAP3205 v3 without turning the power
  • ZyXEL WAP3205 v3 | User Guide - Page 45
    both your WAP3205 v3 and Wireless Client • Connecting to the WAP3205 v3's Wi-Fi Network Manually (No WPS Using WPS on both your WAP3205 v3 and Wireless Client This section WPS. This example uses the WAP3205 v3 as the AP and a WPS Identification Number) in the WAP3205 v3's interface. See Section 5.3.2
  • ZyXEL WAP3205 v3 | User Guide - Page 46
    WPS Process: PBC Method Wireless Client WAP3205 v3 WITHIN 2 MINUTES WPS/Reset SECURITY INFO COMMUNICATION 5.3.2 PIN Configuration When you use the PIN configuration method, you need to check the client's PIN number and use the WAP3205 v3's configuration interface. WAP3205 v3 User's Guide 46
  • ZyXEL WAP3205 v3 | User Guide - Page 47
    two minutes. Then the wireless client is able to communicate with the WAP3205 v3 securely. The following figure shows you the example to set up wireless network and security on WAP3205 v3 and wireless client (ex. the Android smartphone in this example) by using PIN method. WAP3205 v3 User's Guide 47
  • ZyXEL WAP3205 v3 | User Guide - Page 48
    INFO COMMUNICATION 5.4 Connecting to the WAP3205 v3's Wi-Fi Network Manually (No WPS) In this example, we change the WAP3205 v3's wireless settings, and then manually select the WAP3205 v3's new SSID and enter the Wi-Fi key to connect a wireless client to the WAP3205 v3. WAP3205 v3 User's Guide 48
  • ZyXEL WAP3205 v3 | User Guide - Page 49
    -Shared Key: ThisismyWPA-PSKpre-sharedkey) Follow the steps below to configure the wireless settings on your WAP3205 v3. The instructions require that your hardware is connected (see the Quick Start Guide) and you are logged into the Web Configurator through your LAN connection (see Section 2.3 on
  • ZyXEL WAP3205 v3 | User Guide - Page 50
    your notebook or computer's wireless adapter supports one of these standards. 2 Click the Wi-Fi icon in your computer's system tray. 3 The Wireless Network Connection screen displays. Click the refresh button to update the list of the available wireless APs within range. WAP3205 v3 User's Guide 50
  • ZyXEL WAP3205 v3 | User Guide - Page 51
    Chapter 5 Tutorials 4 Select SSID_Example3 and click Connect. 5 The following screen displays if WPS is enabled on the WAP3205 v3 but you didn't press the WPS button. Click Connect using as security key instead. 6 Type the security key in the following screen. Click OK. WAP3205 v3 User's Guide 51
  • ZyXEL WAP3205 v3 | User Guide - Page 52
    entered the correct security key. If your connection is successful, open your Internet browser and enter http://www.zyxel.com or the URL of any other web site in the address bar. If you are able to access the web site, your wireless connection is successfully configured. WAP3205 v3 User's Guide 52
  • ZyXEL WAP3205 v3 | User Guide - Page 53
    PART II Technical Reference 53
  • ZyXEL WAP3205 v3 | User Guide - Page 54
    Overview This chapter discusses how to configure the wireless network settings in your WAP3205 v3. See the appendices for more detailed information about wireless networks. The following as the printer) or with the Internet. Your WAP3205 v3 is the AP in the above example. WAP3205 v3 User's Guide 54
  • ZyXEL WAP3205 v3 | User Guide - Page 55
    . • Every wireless client in the same wireless network must use the same SSID. The SSID is the name of the wireless network. It stands for Service Set IDentity. WAP3205 v3 User's Guide 55
  • ZyXEL WAP3205 v3 | User Guide - Page 56
    00:02. To get the MAC address for each wireless client, see the appropriate User's Guide or other documentation. You can use the MAC address filter to tell the AP which wireless MAC addresses. 2. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. WAP3205 v3 User's Guide 56
  • ZyXEL WAP3205 v3 | User Guide - Page 57
    supports. Suppose the wireless network has two wireless clients. Device A only supports WEP, and device B supports WiFi Protected Setup (WPS) security settings manually. Depending on WAP3205 v3 from a computer connected to the wireless LAN and you change the WAP3205 v3 match the WAP3205 v3's new
  • ZyXEL WAP3205 v3 | User Guide - Page 58
    / Wireless Setup Enable Wireless LAN 802.11 Mode Name(SSID) Enable SSID Broadcast Channel Selection This section is available only when the WAP3205 v3 is in universal repeater mode. This shows the wireless and security settings of the selected AP wireless network. This displays the Service Set
  • ZyXEL WAP3205 v3 | User Guide - Page 59
    Pre-Shared Key Enter the password that lets you connect to the WAP3205 v3. Your password should be in a string of ASCII characters between 8 and 63 or hexadecimal characters between 8 and 64. Apply Click Apply to save your changes back to the WAP3205 v3. Reset Click Reset to reload the previous
  • ZyXEL WAP3205 v3 | User Guide - Page 60
    ("0-9", "A-F"). Apply Reset You must configure at least one key, only one key can be activated at any one time. The default key is key 1. Click Apply to save your changes back to the WAP3205 v3. Click Reset to reload the previous configuration for this screen. WAP3205 v3 User's Guide 60
  • ZyXEL WAP3205 v3 | User Guide - Page 61
    be able to communicate with the WAP3205 v3 even when the WAP3205 v3 is using WPA2-PSK. WPA-PSK/WPA2-PSK uses a simple common password for authentication. Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces and symbols). Apply Reset Type a pre-shared key less than
  • ZyXEL WAP3205 v3 | User Guide - Page 62
    to the MAC Filtering rule. Apply Click Apply to save your changes back to the WAP3205 v3. Reset Click Reset to reload the previous configuration for this screen. 6.6 Wireless LAN Advanced Screen Use this appears as shown. Figure 39 Network > Wireless LAN > Advanced WAP3205 v3 User's Guide 62
  • ZyXEL WAP3205 v3 | User Guide - Page 63
    Setup Tx Power This field controls the transmission power of the WAP3205 v3. If there is a high density of APs in an area, decrease the output power of the WAP3205 v3 to reduce interference with other APs. Enable Intra-BSS Traffic A Basic Service changes to the WAP3205 v3. Click Reset to reload
  • ZyXEL WAP3205 v3 | User Guide - Page 64
    if WPS is disabled and there are no wireless or wireless security changes on the WAP3205 v3 or you click Release_Configuration to remove the configured wireless and wireless security settings. This after the first 2 minutes. Figure 41 Network > Wireless LAN > WPS Station WAP3205 v3 User's Guide 64
  • ZyXEL WAP3205 v3 | User Guide - Page 65
    screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. works in conjunction with the Except for the following times field. WAP3205 v3 User's Guide 65
  • ZyXEL WAP3205 v3 | User Guide - Page 66
    your changes back to the WAP3205 v3. Click Reset to reload the previous configuration for this screen. 6.10 AP Select Screen Use this screen to choose an access point that you want the WAP3205 v3 (in universal repeater mode) go to the last page of the AP select table. WAP3205 v3 User's Guide 66
  • ZyXEL WAP3205 v3 | User Guide - Page 67
    wireless networking standards the wireless device supports. Security Mode This displays the Service Set IDentity of the AP to which the WAP3205 v3 is connecting. Security Mode This displays the type of security configured on the AP to which the WAP3205 v3 is connecting. WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 68
    or floor of a building. You can manage IP addresses in the LAN screen. Figure 45 LAN Setup 7.2 What You Need To Know IP Address IP addresses identify individual devices on a network. Every networking also use subnet masks to divide one network into multiple sub-networks. WAP3205 v3 User's Guide 68
  • ZyXEL WAP3205 v3 | User Guide - Page 69
    Address Type the IP address of your WAP3205 v3 in dotted decimal notation 192.168.1.1 (factory default). IP Subnet Mask The subnet mask WAP3205 v3. Apply Click Apply to save your changes back to the WAP3205 v3. Reset Click Reset to begin configuring this screen afresh. WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 70
    information on the System screens. See the chapter about wizard setup for more information on the next few screens. 8.2 What You Can Do • Use the General screen to enter a name to identify the WAP3205 v3 in the network and set the password (Section 8.3 on page 70). • Use the Time Setting screen to
  • ZyXEL WAP3205 v3 | User Guide - Page 71
    of "0" means a management session never times out, no matter how long it has been left idle (not recommended). Change your WAP3205 v3's password (recommended) using the fields as shown. Old Password Type the default password or the existing password you use to access the system in this field. New
  • ZyXEL WAP3205 v3 | User Guide - Page 72
    set Time and Date Setup to Manual, enter the new date in this field and then click Apply. Click the Copy Your Computer's Time Settings button to copy your computer's time settings into the WAP3205 v3's time and date setup. Click Apply to save your changes back to the WAP3205 v3. Click Reset to begin
  • ZyXEL WAP3205 v3 | User Guide - Page 73
    sent. 9.3 View Log Screen Use the View Log screen to see the logged messages for the WAP3205 v3. Options include logs about system maintenance, system errors, access control, allowed or blocked web sites, sort order. Click Maintenance > Logs to open the View Log screen. WAP3205 v3 User's Guide 73
  • ZyXEL WAP3205 v3 | User Guide - Page 74
    the index number of the log. Type This field displays the type of the log. Log information This field states the reason for the log. WAP3205 v3 User's Guide 74
  • ZyXEL WAP3205 v3 | User Guide - Page 75
    screen to view information related to factory defaults, backup configuration, and restoring configuration (Section 10.4 on page 77). • Use the Restart screen to have the WAP3205 v3 reboot (Section 10.5 on page 79). 10.3 Firmware Upload Screen Find firmware at www.zyxel.com in a file that (usually
  • ZyXEL WAP3205 v3 | User Guide - Page 76
    (.zip) files before you can upload them. Automatically reset default after firmware upgraded Click the Automatically reset default after firmware upgraded check box to have the WAP3205 v3 automatically reset itself after the new firmware is uploaded. Upload Click Upload to begin the upload
  • ZyXEL WAP3205 v3 | User Guide - Page 77
    > Configuration. Information related to factory defaults, backup configuration, and restoring configuration appears as shown next. Figure 54 Maintenance > Tools > Configuration 10.4.1 Backup Configuration Backup configuration allows you to back up (save) the WAP3205 v3's current configuration to
  • ZyXEL WAP3205 v3 | User Guide - Page 78
    file you may need to change the IP address of your computer to be in the same subnet as that of the default WAP3205 v3 IP address (192.168.1.2). See Section 2.2 on page 14 for details on how to set up your computer's IP address. If the upload was not
  • ZyXEL WAP3205 v3 | User Guide - Page 79
    button in this section clears all user-entered configuration information and returns the WAP3205 v3 to its factory defaults. You can also press the WPS/RESET button on the rear panel to reset the factory defaults of your WAP3205 v3. Refer to Section 1.4.1 on page 12 for more information on the WPS
  • ZyXEL WAP3205 v3 | User Guide - Page 80
    CHAPTER 11 Language Use this screen to change the language for the Web Configurator display. Click the language you prefer. The Web Configurator language changes after a while without restarting the WAP3205 v3. Figure 59 Language Figure 60 Language Change Example WAP3205 v3 User's Guide 80
  • ZyXEL WAP3205 v3 | User Guide - Page 81
    . Universal Repeater Use Universal Repeater mode if there is an existing wireless router or access point in your network and you want the WAP3205 v3 to wirelessly relay communications from its wireless clients to it. Client Bridge Use Client Bridge mode if your device needs a wireless client to
  • ZyXEL WAP3205 v3 | User Guide - Page 82
    to save your settings. Reset Click Reset to return to the DHCP server on your network such as a router which can allocate IP addresses or else you need to manually assign IP addresses to devices on your network. • The LAN IP address of the WAP3205 v3 is set to 192.168.1.2. WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 83
    13 Troubleshooting This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories. • Power, Hardware Connections, and LEDs • WAP3205 v3 Access and Login • Internet Access • Resetting the WAP3205 v3 to Its Factory Defaults
  • ZyXEL WAP3205 v3 | User Guide - Page 84
    86 in the Troubleshooting for information on resetting your WAP3205 v3.The default IP address is 192.168.1.2. I forgot the username and password. 1 The default username is admin and default password is 1234. 2 If this does not work, you have to reset the device to its factory defaults. See Section
  • ZyXEL WAP3205 v3 | User Guide - Page 85
    13 Troubleshooting • If your computer is connected wirelessly, use a computer that is connected to a LAN/ETHERNET port. I can see the Login screen, but I cannot log in to the WAP3205 v3. 1 Make sure you have entered the password correctly. The default username is admin and default password is
  • ZyXEL WAP3205 v3 | User Guide - Page 86
    or vendor, or try one of the advanced suggestions. 13.4 Resetting the WAP3205 v3 to Its Factory Defaults If you reset the WAP3205 v3, you lose all of the changes you have made. The WAP3205 v3 re-loads its default settings, and the username/password resets to admin/1234. You have to make all of your
  • ZyXEL WAP3205 v3 | User Guide - Page 87
    13 Troubleshooting 1 Make sure the wireless LAN is enabled on the WAP3205 v3. 2 Make sure the wireless adapter on the wireless station is working properly. 3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the WAP3205 v3
  • ZyXEL WAP3205 v3 | User Guide - Page 88
    first three octets (192.168.1) are the network number, and the fourth octet (16) is the host ID. Figure 63 Network Number and Host ID WAP3205 v3 User's Guide 88
  • ZyXEL WAP3205 v3 | User Guide - Page 89
    IP address with host IDs of all ones is the broadcast address for that network (192.168.1.255 with a 24-bit subnet mask, for example). WAP3205 v3 User's Guide 89
  • ZyXEL WAP3205 v3 | User Guide - Page 90
    , and the remaining octet is the host ID, allowing a maximum of 28 - 2 or 254 possible hosts. The following figure shows the company network before subnetting. WAP3205 v3 User's Guide 90
  • ZyXEL WAP3205 v3 | User Guide - Page 91
    . Therefore, the lowest IP address that can be assigned to an actual host for subnet A is 192.168.1.1 and the highest is 192.168.1.126. WAP3205 v3 User's Guide 91
  • ZyXEL WAP3205 v3 | User Guide - Page 92
    IP Address IP Address (Binary) Subnet Mask (Binary) NETWORK NUMBER 192.168.1. 11000000.10101000.00000001. 11111111.11111111.11111111. LAST OCTET BIT VALUE 192 11000000 11000000 WAP3205 v3 User's Guide 92
  • ZyXEL WAP3205 v3 | User Guide - Page 93
    " HOST BITS SUBNET MASK 1 255.255.128.0 (/17) 2 255.255.192.0 (/18) 3 255.255.224.0 (/19) NO. SUBNETS 2 4 8 NO. HOSTS PER SUBNET 32766 16382 8190 WAP3205 v3 User's Guide 93
  • ZyXEL WAP3205 v3 | User Guide - Page 94
    to the hosts without problems. However, the Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of IP addresses specifically for private networks: • 10.0.0.0 - 10.255.255.255 • 172.16.0.0 - 172.31.255.255 • 192.168.0.0 - 192.168.255.255 WAP3205 v3 User's Guide 94
  • ZyXEL WAP3205 v3 | User Guide - Page 95
    address that is the same as the IP address that a DHCP server assigns to computer B which is a DHCP client. Neither can access the Internet. This problem can be solved by assigning a different static IP address to Internet because the router cannot route between networks. WAP3205 v3 User's Guide 95
  • ZyXEL WAP3205 v3 | User Guide - Page 96
    the router's LAN port both use 192.168.1.1 as the IP address. The computer cannot access the Internet. This problem can be solved by assigning a different IP address to the computer or the router's LAN port. Figure 68 Conflicting Computer and Router IP Addresses Example WAP3205 v3 User's Guide 96
  • ZyXEL WAP3205 v3 | User Guide - Page 97
    to disable pop-up blocking to log into your device. Either disable pop-up blocking (enabled by default in Windows XP SP (Service Pack) 2) or allow pop-up blocking and create an exception for your device's IP address. disables any web pop-up blockers you may have enabled. WAP3205 v3 User's Guide 97
  • ZyXEL WAP3205 v3 | User Guide - Page 98
    the following steps. 1 In Internet Explorer, select Tools, Internet Options and then the Privacy tab. 2 Select Settings...to open the Pop-up Blocker Settings screen. WAP3205 v3 User's Guide 98
  • ZyXEL WAP3205 v3 | User Guide - Page 99
    "http://". For example, http://192.168.1.1. 4 Click Add to move the IP address to the list of Allowed sites. Figure 72 Pop-up Blocker Settings WAP3205 v3 User's Guide 99
  • ZyXEL WAP3205 v3 | User Guide - Page 100
    Options: Security 2 Click the Custom Level... button. 3 Scroll down to Scripting. 4 Under Active scripting make sure that Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is selected (the default). 6 Click OK to close the window. WAP3205 v3 User's Guide 100
  • ZyXEL WAP3205 v3 | User Guide - Page 101
    the Custom Level... button. 3 Scroll down to Microsoft VM. 4 Under Java permissions make sure that a safety level is selected. 5 Click OK to close the window. WAP3205 v3 User's Guide 101
  • ZyXEL WAP3205 v3 | User Guide - Page 102
    the Advanced tab. 2 Make sure that Use Java 2 for under Java (Sun) is selected. 3 Click OK to close the window. Figure 76 Java (Sun) WAP3205 v3 User's Guide 102
  • ZyXEL WAP3205 v3 | User Guide - Page 103
    : TOOLS > Options Click Content to show the screen below. Select the check boxes as shown in the following screen. Figure 78 Mozilla Firefox Content Security WAP3205 v3 User's Guide 103
  • ZyXEL WAP3205 v3 | User Guide - Page 104
    , click Tools, then Preferences. In the Advanced tab, select Content from the left-side menu. Select the check boxes as shown in the following screen. WAP3205 v3 User's Guide 104
  • ZyXEL WAP3205 v3 | User Guide - Page 105
    Appendix B Pop-up Windows, JavaScripts and Java Permissions Figure 80 Opera: Enabling Java To customize JavaScript behavior in the Opera browser, click JavaScript Options. Figure 81 Opera: JavaScript Options Select the items you want Opera's JavaScript to apply. WAP3205 v3 User's Guide 105
  • ZyXEL WAP3205 v3 | User Guide - Page 106
    components you need to use TCP/IP on your computer. If you manually assign IP information instead of using a dynamic IP, make sure that example uses the default Windows XP display theme but can also apply to Windows 2000 and Windows NT. 1 Click Start > Control Panel. WAP3205 v3 User's Guide 106
  • ZyXEL WAP3205 v3 | User Guide - Page 107
    Appendix C Setting Up Your Computer's IP Address 2 In the Control Panel, click the Network Connections icon. 3 Right-click Local Area Connection and then select Properties. 4 On the General tab, select Internet Protocol (TCP/IP) and then click Properties. WAP3205 v3 User's Guide 107
  • ZyXEL WAP3205 v3 | User Guide - Page 108
    Appendix C Setting Up Your Computer's IP Address 5 The Internet Protocol TCP/IP Properties window opens. WAP3205 v3 User's Guide 108
  • ZyXEL WAP3205 v3 | User Guide - Page 109
    following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned Support tab to view your IP address and connection information. Windows Vista This section shows screens from Windows Vista Professional. WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 110
    the Network and Internet icon. 3 Click the Network and Sharing Center icon. 4 Click Manage network connections. 5 Right-click Local Area Connection and then select Properties. WAP3205 v3 User's Guide 110
  • ZyXEL WAP3205 v3 | User Guide - Page 111
    it needs your permission to continue. 6 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. 7 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. WAP3205 v3 User's Guide 111
  • ZyXEL WAP3205 v3 | User Guide - Page 112
    following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to Support tab to view your IP address and connection information. Windows 7 This section shows screens from Windows 7 Enterprise. WAP3205 v3 User's Guide 112
  • ZyXEL WAP3205 v3 | User Guide - Page 113
    , click View network status and tasks under the Network and Internet category. 3 Click Change adapter settings. 4 Double click Local Area Connection and then select Properties. WAP3205 v3 User's Guide 113
  • ZyXEL WAP3205 v3 | User Guide - Page 114
    Appendix C Setting Up Your Computer's IP Address Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. 5 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. WAP3205 v3 User's Guide 114
  • ZyXEL WAP3205 v3 | User Guide - Page 115
    Appendix C Setting Up Your Computer's IP Address 6 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. WAP3205 v3 User's Guide 115
  • ZyXEL WAP3205 v3 | User Guide - Page 116
    dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network type "ipconfig" and then press [ENTER]. 3 The IP settings are displayed as follows. WAP3205 v3 User's Guide 116
  • ZyXEL WAP3205 v3 | User Guide - Page 117
    Appendix C Setting Up Your Computer's IP Address Mac OS X: 10.3 and 10.4 The screens in this section are from Mac OS X 10.4 but can also apply to 10.3. 1 Click Apple > System Preferences. 2 In the System Preferences window, click the Network icon. WAP3205 v3 User's Guide 117
  • ZyXEL WAP3205 v3 | User Guide - Page 118
    the Network preferences pane opens, select Built-in Ethernet from the network connection type list, and then click Configure. 4 For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in the TCP/IP tab. WAP3205 v3 User's Guide 118
  • ZyXEL WAP3205 v3 | User Guide - Page 119
    's IP Address 5 For statically assigned settings, do the following: • From the Configure IPv4 list, select Manually. • In the IP Address field, type your IP address. • In the Subnet Mask field, type and then selecting the appropriate Network Interface from the Info tab. WAP3205 v3 User's Guide 119
  • ZyXEL WAP3205 v3 | User Guide - Page 120
    in this section are from Mac OS X 10.5 but can also apply to 10.6. 1 Click Apple > System Preferences. 2 In System Preferences, click the Network icon. WAP3205 v3 User's Guide 120
  • ZyXEL WAP3205 v3 | User Guide - Page 121
    from the list of available connection types. 4 From the Configure list, select Using DHCP for dynamically assigned settings. 5 For statically assigned settings, do the following: • From the Configure list, select Manually. • In the IP Address field, enter your IP address. WAP3205 v3 User's Guide 121
  • ZyXEL WAP3205 v3 | User Guide - Page 122
    Computer's IP Address • In the Subnet Mask field, enter your subnet mask. • In the Router field, enter the IP address of your WAP3205 v3. 6 Click Apply and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting
  • ZyXEL WAP3205 v3 | User Guide - Page 123
    > Administration > Network. 2 When the Network Settings window opens, click Unlock to open the Authenticate window. (By default, the Unlock button is greyed out until clicked.) You cannot make changes to your configuration unless you first enter your admin password. WAP3205 v3 User's Guide 123
  • ZyXEL WAP3205 v3 | User Guide - Page 124
    Appendix C Setting Up Your Computer's IP Address 3 In the Authenticate window, enter your admin account name and password then click the Authenticate button. 4 In the Network Settings window, select the connection that you want to configure, then click Properties. WAP3205 v3 User's Guide 124
  • ZyXEL WAP3205 v3 | User Guide - Page 125
    Computer's IP Address 5 The Properties dialog box opens. • In the Configuration list, select Automatic Configuration (DHCP) if you have a dynamic IP address. • In the Configuration list, select Static IP address if enter the DNS server information in the fields provided. WAP3205 v3 User's Guide 125
  • ZyXEL WAP3205 v3 | User Guide - Page 126
    > Network Tools, and then selecting the appropriate Network device from the Devices tab. The Interface Statistics column shows data if your connection is working properly. WAP3205 v3 User's Guide 126
  • ZyXEL WAP3205 v3 | User Guide - Page 127
    . The following screens use the default openSUSE 10.3 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in the KDE: 1 Click K Menu > Computer > Administrator Settings (YaST). WAP3205 v3 User's Guide 127
  • ZyXEL WAP3205 v3 | User Guide - Page 128
    Appendix C Setting Up Your Computer's IP Address 2 When the Run as Root - KDE su dialog opens, enter the admin password and click OK. 3 When the YaST Control Center window opens, select Network Devices and then click the Network Card icon. WAP3205 v3 User's Guide 128
  • ZyXEL WAP3205 v3 | User Guide - Page 129
    Appendix C Setting Up Your Computer's IP Address 4 When the Network Settings window opens, click the Overview tab, select the appropriate connection Name from the list, and then click the Configure button. 5 When the Network Card Setup window opens, click the Address tab WAP3205 v3 User's Guide 129
  • ZyXEL WAP3205 v3 | User Guide - Page 130
    Figure 85 openSUSE 10.3: Network Card Setup 6 Select Dynamic Address (DHCP) if you have a dynamic IP Setup window. 8 If you know your DNS server IP address(es), click the Hostname/DNS tab in Network Settings and then enter the DNS server information in the fields provided. WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 131
    86 openSUSE 10.3: KNetwork Manager When the Connection Status - KNetwork Manager window opens, click the Statistics tab to see if your connection is working properly. WAP3205 v3 User's Guide 131
  • ZyXEL WAP3205 v3 | User Guide - Page 132
    Appendix C Setting Up Your Computer's IP Address Figure 87 openSUSE: Connection Status - KNetwork Manager WAP3205 v3 User's Guide 132
  • ZyXEL WAP3205 v3 | User Guide - Page 133
    an independent network, which is commonly referred to as an ad-hoc network or Independent Basic Service Set (IBSS). The following diagram shows an example of notebook computers using wireless adapters to form the wired network but cannot communicate with each other. WAP3205 v3 User's Guide 133
  • ZyXEL WAP3205 v3 | User Guide - Page 134
    Appendix D Wireless LANs Figure 89 Basic Service Set ESS An Extended Service Set (ESS) consists of a series of overlapping BSSs, each containing an access point, with each access wireless clients within the same ESS must have the same ESSID in order to communicate. WAP3205 v3 User's Guide 134
  • ZyXEL WAP3205 v3 | User Guide - Page 135
    cannot "hear" each other, that is they do not know if the channel is currently being used. Therefore, they are considered hidden from each other. WAP3205 v3 User's Guide 135
  • ZyXEL WAP3205 v3 | User Guide - Page 136
    Threshold is recommended for networks not prone to interference while you should set a smaller threshold for busy networks or networks that are prone to interference. WAP3205 v3 User's Guide 136
  • ZyXEL WAP3205 v3 | User Guide - Page 137
    preamble when all wireless devices on the network support it, otherwise the WAP3205 v3 uses long preamble. Note: The wireless devices WAP3205 v3 are data encryption, wireless client authentication, restricting access by device MAC address and hiding the WAP3205 v3 identity. WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 138
    WAP3205 v3. Table 50 Wireless Security Levels SECURITY LEVEL SECURITY TYPE Least Secure Unique SSID (Default based identification that allows for roaming. • Support for RADIUS (Remote Authentication Dial In User Service, RFC 2138, 2139) for centralized user server. WAP3205 v3 User's Guide 138
  • ZyXEL WAP3205 v3 | User Guide - Page 139
    runs on top of the IEEE 802.1x transport mechanism in order to support multiple types of user authentication. By using EAP to interact with an the password by encrypting the password with the challenge and sends back the information. Password is not sent in plain text. WAP3205 v3 User's Guide 139
  • ZyXEL WAP3205 v3 | User Guide - Page 140
    (Tunneled Transport Layer Service) EAP-TTLS is password methods through the secured connection to authenticate the clients, thus hiding client identity. However, PEAP only supports is not necessary to configure a default encryption key in the wireless security configuration WAP3205 v3 User's Guide 140
  • ZyXEL WAP3205 v3 | User Guide - Page 141
    gateway and wireless client. As long as the passwords match, a wireless client will be granted access to a WLAN. If the AP or the wireless clients do not support WPA2, just use WPA or WPA-PSK depending using the PMK to dynamically generate unique data encryption keys to WAP3205 v3 User's Guide 141
  • ZyXEL WAP3205 v3 | User Guide - Page 142
    password, instead of user-specific credentials. The common-password and may not be supported in all wireless devices on an operating system instructing the wireless client how to address of the RADIUS server, its port number (default is 1812), and the RADIUS shared secret. A WAP3205 v3 User's Guide 142
  • ZyXEL WAP3205 v3 | User Guide - Page 143
    Application Example WPA(2)-PSK Application Example A WPA(2)-PSK application looks as follows. 1 First enter identical passwords into the AP and all wireless clients. The Pre-Shared Key (PSK) must consist of . They use these keys to encrypt data exchanged between them. WAP3205 v3 User's Guide 143
  • ZyXEL WAP3205 v3 | User Guide - Page 144
    WEP Shared WEP WPA WPA-PSK WPA2 WPA2-PSK TKIP/AES TKIP/AES TKIP/AES TKIP/AES ENTER MANUAL KEY IEEE 802.1X No Disable Enable without Dynamic WEP Key No Enable with Dynamic WEP Key Yes antennas properly increases the range and coverage area of a wireless LAN. WAP3205 v3 User's Guide 144
  • ZyXEL WAP3205 v3 | User Guide - Page 145
    as close to the center of the coverage area as possible. For directional antennas, point the antenna in the direction of the desired coverage area. WAP3205 v3 User's Guide 145
  • ZyXEL WAP3205 v3 | User Guide - Page 146
    DHCP Client. BOOTP_SERVER UDP 67 DHCP Server. CU-SEEME TCP UDP 7648 24032 A popular video conferencing solution from White Pines Software. DNS TCP/UDP 53 Domain Name Server, a service that matches web names (for example www.zyxel often used in e- commerce. WAP3205 v3 User's Guide 146
  • ZyXEL WAP3205 v3 | User Guide - Page 147
    secure transfer of data over public networks. This is the data channel. Remote Command Service. A streaming audio service that enables real time sound over the web. Remote Execution Daemon. Remote Login. UNIX systems and network servers. Secure Shell Remote Login Program. WAP3205 v3 User's Guide 147
  • ZyXEL WAP3205 v3 | User Guide - Page 148
    Table 53 Commonly Used Services (continued) NAME PROTOCOL PORT(S) STRM WORKS UDP 1558 SYSLOG UDP 514 TACACS UDP 49 TELNET TCP but uses the UDP (User Datagram Protocol) rather than TCP (Transmission Control Protocol). Another video conferencing solution. WAP3205 v3 User's Guide 148
  • ZyXEL WAP3205 v3 | User Guide - Page 149
    www.zyxel.com Asia China • Zyxel Communications (Shanghai) Corp. Zyxel Communications (Beijing) Corp. Zyxel Communications (Tianjin) Corp. • http://www.zyxel.cn India • Zyxel Technology India Pvt Ltd • http://www.zyxel.in Kazakhstan • Zyxel Kazakhstan • http://www.zyxel.kz WAP3205 v3 User's Guide
  • ZyXEL WAP3205 v3 | User Guide - Page 150
    www.zyxel.com/tw/zh/ Thailand • Zyxel Thailand Co., Ltd • http://www.zyxel.co.th Vietnam • Zyxel Communications Corporation-Vietnam Office • http://www.zyxel.com/vn/vi Europe Austria • Zyxel Deutschland GmbH • http://www.zyxel.de Belarus • Zyxel BY • http://www.zyxel.by WAP3205 v3 User's Guide 150
  • ZyXEL WAP3205 v3 | User Guide - Page 151
    com/ee/et/ Finland • Zyxel Communications • http://www.zyxel.fi France • Zyxel France • http://www.zyxel.fr Germany • Zyxel Deutschland GmbH • http://www.zyxel.de Hungary • Zyxel Hungary & SEE • http://www.zyxel.hu Italy • Zyxel Communications Italy • http://www.zyxel.it/ WAP3205 v3 User's Guide 151
  • ZyXEL WAP3205 v3 | User Guide - Page 152
    Russia • Zyxel Russia • http://www.zyxel.ru Slovakia • Zyxel Communications Czech s.r.o. organizacna zlozka • http://www.zyxel.sk Spain • Zyxel Communications ES Ltd • http://www.zyxel.es Sweden • Zyxel Communications • http://www.zyxel.se Switzerland • Studerus AG WAP3205 v3 User's Guide 152
  • ZyXEL WAP3205 v3 | User Guide - Page 153
    . • https://www.zyxel.com/br/pt/ Ecuador • Zyxel Communication Corporation • http://www.zyxel.com/ec/es/ Middle East Israel • Zyxel Communication Corporation • http://il.zyxel.com/homepage.shtml Middle East • Zyxel Communication Corporation • http://www.zyxel.com/me/en/ WAP3205 v3 User's Guide 153
  • ZyXEL WAP3205 v3 | User Guide - Page 154
    F Customer Support North America USA • Zyxel Communications, Inc. - North America Headquarters • http://www.zyxel.com/us/en/ Oceania Australia • Zyxel Communications Corporation • http://www.zyxel.com/au/en/ Africa South Africa • Nology (Pty) Ltd. • http://www.zyxel.co.za WAP3205 v3 User's Guide 154
  • ZyXEL WAP3205 v3 | User Guide - Page 155
    patent rights nor the patent rights of others. Zyxel further reserves the right to make changes in not installed and used according to the instructions, may cause harmful interference to radio manual mention that this device can be installed into the external environment. WAP3205 v3 User's Guide 155
  • ZyXEL WAP3205 v3 | User Guide - Page 156
    EU and other Countries following the EU Directive 2014/53/ EU (RED). And this product may be used in all EU countries (and other countries following the EU Directive 2014/53/EU ) Zyxel 2014/53/ЕC. National Restrictions • The Belgian Institute for Postal Services and WAP3205 v3 User's Guide 156
  • ZyXEL WAP3205 v3 | User Guide - Page 157
    íslušné ustanovenia Smernice 2014/53/EÚ. Zyxel izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 2014/53/EU. Zyxel vakuuttaa täten että laitteet tyyppinen the output power available at the connector (specified in dBm). WAP3205 v3 User's Guide 157
  • ZyXEL WAP3205 v3 | User Guide - Page 158
    them. • Always disconnect all cables from this device before servicing or disassembling. • Do not remove the plug and of used batteries according to the instruction. Dispose them at the applicable Energy-related Products) Zyxel products put on the EU market in compliance WAP3205 v3 User's Guide 158
  • ZyXEL WAP3205 v3 | User Guide - Page 159
    till en återvinningsstation. Vid tiden för kasseringen bidrar du till en bättre miljö och mänsklig hälsa genom att göra dig av med den på ett återvinningsställe. WAP3205 v3 User's Guide 159
  • ZyXEL WAP3205 v3 | User Guide - Page 160
    Appendix G Legal Information Environmental Product Declaration WAP3205 v3 User's Guide 160
  • ZyXEL WAP3205 v3 | User Guide - Page 161
    you bought the device at http://www.zyxel.com/web/support_warranty_info.php. Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at www.us.zyxel.com for North American products. WAP3205 v3 User's Guide 161
  • ZyXEL WAP3205 v3 | User Guide - Page 162
    134 ESSID 87 Extended Service Set, See ESS 134 F C CA 140 Certificate Authority See CA. certifications 158 viewing 161 Channel 35, 39 channel 56, 135 interference 135 Configuration backup 77 reset the factory defaults 79 restore 78 contact information 149 Firmware upload 75 file extension using
  • ZyXEL WAP3205 v3 | User Guide - Page 163
    802.11g 137 Independent Basic Service Set See IBSS 133 initialization repeater 33 overview 9 L LAN 68 LAN overview 68 LAN setup 68 Local Area Network 68 Log 73 M MAC 61 MAC Quality of Service (QoS) 63 R RADIUS 138 message types 139 messages 139 shared secret key 139 Reset button 20, 79 Reset the
  • ZyXEL WAP3205 v3 | User Guide - Page 164
    screw anchor 12 Service Set 58 Service Set IDentification 58, 67 Service Set IDentity. See SSID. SSID 35, 55, 58, 67 subnet 88 Subnet Mask 69 subnet mask 89 subnetting 90 Sys Op Mode 81 System General Setup 70 System application example 143 WPS 11 WPS button 11 VMG3925-B10C/B30C User's Guide 164
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
Default Login Details
User’s Guide
WAP3205 v3
Wireless N300 Access Point
Copyright © 2019 Zyxel Communications Corporation
LAN IP Address
User Name
admin
Password
1234
Version 1.00 Edition 4, 01/2019