TASCAM DR-07MKII elease Notes
TASCAM DR-07MKII Manual
 |
View all TASCAM DR-07MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
TASCAM DR-07MKII manual content summary:
- TASCAM DR-07MKII | elease Notes - Page 1
DR-07@# Release Notes Updates Always use the the automatic power function has been improved when connected as a USB mass storage device. • A problem that occurred when the unit was started with the VSA (Variable Speed Audition) function set to more need to update it. D01154900E TASCAM DR-07MKII 1 - TASCAM DR-07MKII | elease Notes - Page 2
DR-07@# Release Notes Firmware update procedures CAUTION When updating the firmware, be sure that the batteries have sufficient charge or power the unit using a TASCAM the UTILITY folder on the DR-07MKII. 4 After copying has "Confirmation of firmware version" instructions above to check that the
-
1 -
2
 |
 |
TASCAM DR-07MKII
1
Updates
Always use the most recent firmware for this device.
Please visit the TEAC Global Site at http://teac-global.com/
to check for the latest firmware.
New functions
V1.10 additions
The tuner is now easier to use.
When the
TUNER
screen is open, you can press the
PLAY
button to reverse the screen orientation, making it easier
to tune using the built-in mic.
Maintenance items
V1.13 fixes
•
Operation of the automatic power function has been
improved when connected as a USB mass storage
device.
•
A problem that occurred when the unit was started
with the VSA (Variable Speed Audition) function set to
more than 1X has been fixed.
V1.12 fix
•
When started in a cold environment, a loud noise
would occur from the
/LINE OUT
jack on rare
occasions. This has been fixed.
V1.11 fixes
•
Certain MP3 files could not be properly played back to
their ends. This has been fixed.
•
Operation reliability has been improved.
V1.10 fixes
•
If the power was turned OFF when the built-in mic
right-left setting was set to
R-L
and then a stereo
mini plug was inserted into the
MIC/EXT IN
jack before
turning the power ON again, the right-left setting of
the external input would be reversed. This has been
fixed.
•
The automatic power off setting item display has been
changed to
AUTO PWR SAVE
and the default
value has been changed to
30min
.
V1.01 fixes
•
If you pressed the
RECORD
[
º
]
button when the Auto
Record function was on and operating, the Auto Record
function would not perform correctly in some cases.
This has been fixed.
•
If a folder created by a computer was present and
you created an additional new folder and then tried
to record to it, recording to the new folder would not
occur in some cases. This has been fixed.
•
Operation reliability has been improved.
Confirmation of firmware version
Confirm the firmware version of your DR-07MKII before
conducting a firmware update.
1
Turn the unit’s power ON.
2
Press the MENU button to open the
MENU
screen,
select
INFORMATION
and press the F4 (
¥
) key.
3
Use the +/− buttons to select the
OTHERS
menu item, and press the
Á
button to open the
OTHERS
submenu.
4
Use the +/− buttons to select the
INFORMATION
menu item, and press the
Á
button to open the
INFORMATION
screen
FILE (1/3)
page.
5
Use the +/− buttons to open the
SYSTEM (3/3)
page where you can check the
System Ver.
item that shows the firmware version.
If the
System Ver.
shown here is the same or
newer than the firmware version that you planned to
update to, then there is no need to update it.
DR-07@#
Release Notes
D01154900E