Karcher BR 40/10C Operating instructions 2
Karcher BR 40/10C Manual
 |
View all Karcher BR 40/10C manuals
Add to My Manuals
Save this manual to your list of manuals |
Karcher BR 40/10C manual content summary:
- Karcher BR 40/10C | Operating instructions 2 - Page 1
QUICKSTART BR 40/10 C Warning These are only brief instructions! Please read and comply with these instructions prior to using or servicing your appliance. The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers for the operator and other - Karcher BR 40/10C | Operating instructions 2 - Page 2
QUICKSTART Operation 1A 2A B C D 3A B Adjust the brush contact pressure A Place the slider vertically. Pull out the rotary handle of the brush contact pressure and set it to the desired value. Note Carry out the initial cleaning attempts with less contact pressure. Increase contact pressure - Karcher BR 40/10C | Operating instructions 2 - Page 3
QUICKSTART Finish operation 1A B C D Shutting Down the Appliance A Release the switch for detergent solution. Push the appliance forward for another 1-2 m to draw off residual water. Release the brush drive button. B Press the pedal to lower the vacuum bar. C Place the slider vertically - the - Karcher BR 40/10C | Operating instructions 2 - Page 4
daily monthly Kärcher Customer Service QUICKSTART Maintenance and care 1A B A Fill the fresh water tank with clear water and between the appliance and the wastewater reservoir; replace if required. B Clean the brush tunnel. 3 Have annual customer service work performed. 5.964-029.0 11/12
-
1 -
2 -
3 -
4
 |
 |
QUICKSTART
5.964-029.0 11/12
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.
Start up
1
A
b
C
Caution
Risk of damage. Only use the recommended
detergents. With respect to different detergents
the operator bears the increased risk regarding
the operational safety, accident risk and reduced
product life of the appliance. Only use detergents
that are free from solvents, hydrochloric acid and
hydrofluoric acid.
Follow the safety instructions for using detergents.
Note
Do not use highly foaming detergents. Observe
the dosing notes.
A
Open the cover of the fresh water reservoir.
Pour in water/detergent mixture. Maximum
temperature of the liquid 50 °C.
Close the cover of the fresh water reservoir.
Short distances on level grounds
B
Place the slider vertically.
C
Pull out the rotary handle for the brush con-
tact pressure and set it to the drive position.
Use the pushing handle to push the appliance
to the place of use.
2
A
D
B
E
C
F
Long distances, uneven grounds
A
Place the slider vertically and tilt the lock up.
B
Install the transport wheels.
Caution
Danger of damage due to leaking water. Remove
the waste water and fresh water reservoirs before
tilting the appliance.
C
Remove the filled waste and fresh water
reservoirs from the appliance and transport
them separately.
D
Tilt the appliance to the side and drive it to the
place of use on its transport wheels.
If the transport wheels hinder the use of the
appliance:
E
Press the transport wheel release button and
pull the transport wheel out.
F
Insert the transport wheels into their holder
until they stop.
3
A
B
A
Connect an extension cable with a sufficient
cross section.
Always unwind extension cord completely
Insert the end of the extension cable as a loop
in the strain relief clamp.
B
Plug in the main plug.
BR 40/10 C