Hunter 44110 Owner's Manual
Hunter 44110 Manual
 |
View all Hunter 44110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 44110 manual content summary:
- Hunter 44110 | Owner's Manual - Page 1
About This Document We recommend that you download the latest version of Adobe Acrobat Reader. Click here to get the latest version. Note: This document contains hyperlinks. In the Table of Contents, you - Hunter 44110 | Owner's Manual - Page 2
For optimum viewing: Click View and go to Page Layout. Select Facing. - Hunter 44110 | Owner's Manual - Page 3
Set & $ave Programmable ermostat installation and operation manual Model 44110 42707-01 3-7-06 - Hunter 44110 | Owner's Manual - Page 4
2 - Hunter 44110 | Owner's Manual - Page 5
the Existing Unit 7 Installing the Thermostat 12 installing the wall plate 12 connecting the wires 16 attaching the thermostat 18 Settings 22 Methods of Operation 26 manual operation 28 default programs 32 creating custom programs 34 Icons and Features 38 Troubleshooting 49 3 - Hunter 44110 | Owner's Manual - Page 6
Model 44110 Congratulations! Thank you for choosing a Hunter programmable thermostat. Your new Hunter thermostat will provide years of reliable service and year-round energy savings. Please read this manual before beginning installation and save this booklet for complete operation instructions - Hunter 44110 | Owner's Manual - Page 7
- Fired Boilers Oil - Fired Furnace Electric Furnace Electric Air Conditioning This thermostat is not designed for heat pump systems or 110/220 V baseboard heating systems. If you are unsure what kind of heating and cooling system you have, please contact a qualified HVAC Technician for assistance - Hunter 44110 | Owner's Manual - Page 8
TOOLS This thermostat includes two #8 slotted screws and two wall anchors for mounting. To install your new thermostat, you will need the following supplies: Flat-head screwdriver Small Phillips-head screwdriver Hammer Electric drill and 3/16" bit Two 1.5 Volt (AA) size alkaline batteries - Hunter 44110 | Owner's Manual - Page 9
NOTICE! Do not disconnect the wires from the existing thermostat before reading these instructions. The wires must be labeled prior to removal to ensure proper reconnection. 7 - Hunter 44110 | Owner's Manual - Page 10
RC Y G W RC Y G W 8 - Hunter 44110 | Owner's Manual - Page 11
to access the wires from the wall. (Some thermostats may have multiple covers, screws or other locking devices that must be removed or disengaged.) 3. Locate, but do not disconnect the wires. (If wires are not visible, they may be connected to the back of the wall plate. Some models may have doors - Hunter 44110 | Owner's Manual - Page 12
if your existing thermostat is marked... label the wire with this sticker: G W Y RC RH RH / R / VR / 4 24 Volt RH RC / VC 24 Volt cool RC Y / C* / M air conditioning compressor Y W / H heating W G / F fan G 10 - Hunter 44110 | Owner's Manual - Page 13
and should not be used. If you have a wire marked C, do not connect it to any terminal. This wire is used only for non-battery powered thermostats. 5. Do not let the wires slip back into the wall during disconnection. You may want to secure the wires to the wall as you disconnect them. After all - Hunter 44110 | Owner's Manual - Page 14
G 12 Y RC W - Hunter 44110 | Owner's Manual - Page 15
THE THERMOSTAT INSTALLING THE WALL PLATE 1. Remove the wall plate from the new thermostat by pressing the release tab on the bottom of the thermostat. 2. Position the new wall plate on the wall and pull the labeled wires through the opening. 3. If the existing holes do not match those on the Hunter - Hunter 44110 | Owner's Manual - Page 16
G Y RC W 14 - Hunter 44110 | Owner's Manual - Page 17
INSTALLING THE THERMOSTAT, CONT. 4. Remove the wall plate and drill two 3/16" holes where marked. 5. Tap the plastic anchors into the holes until they are flush with the wall. 6. Reposition the wall plate on the wall, pulling the wires through the opening. Insert the mounting screws through the wall - Hunter 44110 | Owner's Manual - Page 18
RC Y G W G RC RH Y W 16 Terminal Shield - Hunter 44110 | Owner's Manual - Page 19
INSTALLING THE THERMOSTAT, CONT. CONNECTING THE WIRES 1. Loosen, but do not remove, the terminal screws. Jumper G RC RH Y W Note: A jumper wire has been provided, connecting the RC and RH terminals for systems that do not provide both an RH and RC wire. If you have both an RH and RC wire, remove - Hunter 44110 | Owner's Manual - Page 20
Thermostat T Cover AM 4 HEAT System Switch DISABLE RECOVERY ENABLE HG HE W/B Y/O RH RC G 18 - Hunter 44110 | Owner's Manual - Page 21
INSTALLING THE THERMOSTAT, CONT. ATTACHING THE THERMOSTAT 1. Lift the thermostat cover and set the SYSTEM to OFF and the FAN switch to AUTO. 2. Locate the HE/HG on the back of the thermostat. Set the switch to HG (default) for gas furnace and oil burners. Set the switch to HE for electric furnaces - Hunter 44110 | Owner's Manual - Page 22
1 Tab 2 20 - Hunter 44110 | Owner's Manual - Page 23
INSTALLING THE THERMOSTAT, CONT. 4. Place the top of the thermostat over the two tabs on the wall plate. Press the thermostat onto the wall plate and press to snap the bottom tab into place. Note: Do not force the thermostat onto the wall plate, as the terminal pins may be damaged. If the thermostat - Hunter 44110 | Owner's Manual - Page 24
reset 22 - Hunter 44110 | Owner's Manual - Page 25
is Fahrenheit (Fo). (NOTICE: CHANGING THIS SETTING WILL RESET THE THERMOSTAT TO FACTORY DEFAULT PROGRAMS.) To change to Celcius (Co): 1. Press and hold the U button. 2. Use a paperclip to press the R button. 3. Continue to press the U button, but release the Reset button when the LCD turns on. To - Hunter 44110 | Owner's Manual - Page 26
AM PM day/time 24 - Hunter 44110 | Owner's Manual - Page 27
format by pressing D/T and then Program. The AM/PM indicator will be off when the thermostat is in 24 hour mode. Setting day and time: 1. Press D/T. (AM/PM and current hour will flash) 2. Press U or D to adjust the setting. 3. Press D/T again to adjust the minute setting. 4. Press - Hunter 44110 | Owner's Manual - Page 28
T AM 4 HEAT 26 - Hunter 44110 | Owner's Manual - Page 29
METHODS OF OPERATION This thermostat gives you the ability to program up to 4 custom temperature settings per day or utilize preprogrammed settings. For manual operation instructions, see pages 28-31. To utilize the pre-programmed settings, see pages 32-33. To create custom programs, see pages 34-37 - Hunter 44110 | Owner's Manual - Page 30
TH AM 2 HEAT 28 - Hunter 44110 | Owner's Manual - Page 31
or permanently override all settings and adjust temperatures manually. If you want to only override the current program: 1. Press and hold U or D for one second to enter Manual Override mode. (Release the button when the display flashes.) 2. Press the U or D buttons to adjust the temperature - Hunter 44110 | Owner's Manual - Page 32
HOLD system heat off cool 30 hold /return - Hunter 44110 | Owner's Manual - Page 33
to permanently override all settings and adjust the thermostat manually: 1. Press H/R until the Hold icon appears. 2. Press and hold U or D for one second to enter Manual Override mode. (Release the button when the display flashes.) 3. Press the U or D buttons to adjust the temperature - Hunter 44110 | Owner's Manual - Page 34
DEFAULT PROGRAMS CHART 10 pm Program 4 Heat : 60o F (16o C) Cool : 82o F (28oC) Program 3 Heat : 68o F (20o C) Cool : 78o F (26o C) 4 pm Program 2 Heat : 60o F (16o C) Cool : 85o F (29o C) 6 am Program 1 Heat : 68o F (20o C) Cool : 78o F (26o C) 8 am 32 - Hunter 44110 | Owner's Manual - Page 35
METHODS OF OPERATION, CONT. 2. DEFAULT PROGRAMS This thermostat meets ENERGY STAR guidelines for energy efficiency. By using the pre-programmed settings, this thermostat can save you money by optimizing energy usage in heating and cooling. Refer to the Default Programs Chart for detailed information - Hunter 44110 | Owner's Manual - Page 36
AM PM system heat off cool 34 program hold /return - Hunter 44110 | Owner's Manual - Page 37
C). • After 15 seconds of inactivity during programming, the thermostat will return to Normal Display mode. • When setting the program time, note the AM seconds, the unit will return to the Normal Display mode. 1. Slide the to HEAT or COOL to program the corresponding system. 2. Press P to enter - Hunter 44110 | Owner's Manual - Page 38
system heat off cool M T W TH F SA SU AM PM 1234 HEAT COOL 36 program hold /return - Hunter 44110 | Owner's Manual - Page 39
time must equal 24 hours.) 6. Repeat steps 2-5 for the remaining days. 7. To review your program settings, press P repeatedly to review the customized programs. (You can make changes at any time when the thermostat is in Program mode.) 8. Slide the to the opposite position and repeat steps - Hunter 44110 | Owner's Manual - Page 40
FILTER filter 38 - Hunter 44110 | Owner's Manual - Page 41
ICONS AND FEATURES 1. Filter change indicator - will flash after 400 hours of system use as a reminder to check or change your filter. Press and hold the F button for 3 seconds after changing the filter to reset the filter timer. (Pressing the Filter button for less than 3 seconds will cause the - Hunter 44110 | Owner's Manual - Page 42
system heat off cool HEAT COOL reset 40 - Hunter 44110 | Owner's Manual - Page 43
time by allowing the system to run longer; Down will decrease your cycle time by causing the system to run for a shorter length of time.) Span settings remain the same for HEAT and COOL system settings. When batteries are installed, or the unit is RESET, the span cycle will revert to 2. 41 - Hunter 44110 | Owner's Manual - Page 44
M PM 4 COOL STAGE 1 STAGE 2 42 - Hunter 44110 | Owner's Manual - Page 45
as weak, the icon will flash until new AA alkaline batteries are installed. If the batteries become too weak for normal operation, the thermostat enters the second battery power shortage mode. When no battery power is left, the battery icon will flash alone on the display and your system will turn - Hunter 44110 | Owner's Manual - Page 46
hold /return 44 - Hunter 44110 | Owner's Manual - Page 47
temperature. Auto recovery calculates the time needed to adjust the temperature to the next program setting. When the thermostat is in Auto Recovery mode, the display will flash alternating messages of RECO and the time. Auto Recovery can be disabled by sliding the recovery switch on the back of the - Hunter 44110 | Owner's Manual - Page 48
46 - Hunter 44110 | Owner's Manual - Page 49
indicates an unexpected battery problem. The screen will flash an ERR message and shut your system off until the batteries are replaced with new AA alkaline batteries. You must Reset and reprogram the thermostat after replacing the batteries if the thermostat has entered Error mode. 6. Auto cut off - Hunter 44110 | Owner's Manual - Page 50
, there will be a 3.5 minute delay before it can be restarted to prevent compressor damage due to rapid cycling. 3. Resetting the unit reset To restore the thermostat to the original factory settings, press the reset button with a paperclip. (This will erase any user-programmed settings.) 48 - Hunter 44110 | Owner's Manual - Page 51
TROUBLESHOOTING 1. My display will not come on. 1 a. Check batteries and battery connections. 1 b. Reset the thermostat. 2. The auto fan feature will not operate properly. 2 a. Remove the thermostat from the wall plate and set the HG/HE switch to the correct position. 3. My display is erratic. 3 - Hunter 44110 | Owner's Manual - Page 52
TROUBLESHOOTING 5. My heating or cooling will not turn on or off. 5 a. Check the Heat/Cool function switch to ensure closed properly. 5 f. If your system has 4 wires, ensure the jumper wire is installed between the RC and RH terminals. 6. The display will come on, but it will not stay illuminated - Hunter 44110 | Owner's Manual - Page 53
TROUBLESHOOTING 7. My system continues to operate when the thermostat is in the off position. 7 a. Replace unit. 8. The LCD screen permanently reads HI, LO, or ERR. 8 a. Replace unit. 9. How do I just operate my thermostat manually? 9 a. Manual operation instructions are on pages 28-31. 51 - Hunter 44110 | Owner's Manual - Page 54
Is there help on the web? Yes. Visit http://www.hunterfan.com for more information. Can't I just call someone? Sure. Our Technical Support Group is available from 8 am to 5 pm CST. They may be reached toll-free at 1-888-830-1326. 52
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
 |
 |
About This Document
We recommend that you download the latest version of Adobe Acrobat Reader. Click
here
to get the latest version.
Note:
This document contains hyperlinks. In the Table of Contents, you may click
directly on a page number to access it. To return to the Table of Contents from any
page, simply click the page number at the bottom of the screen.