Chamberlain KLIK1U KLIK3U
Chamberlain KLIK1U Manual
 |
View all Chamberlain KLIK1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Chamberlain KLIK1U manual content summary:
- Chamberlain KLIK1U | KLIK3U - Page 1
KLIK3U MODEL KLIK3U-BL MODEL KLIK3U-PK UNIVERSAL REMOTE CONTROL The remote control can be programmed to activate up to two products, such as a garage door opener, gate operator, or commercial door operator. Each button on the remote control works independently of the other and must be programmed - Chamberlain KLIK1U | KLIK3U - Page 2
remote control to has a Program/LEARN button or DIP SWITCHES. The Program/LEARN button or DIP SWITCHES are located either on the product or in an external receiver on or near the product. The following instructions are for a garage door opener with a Program/LEARN button. For DIP SWITCH programming - Chamberlain KLIK1U | KLIK3U - Page 3
1 Remove the cover. Press and hold the program button until the LED turns on. LED Program Button Cover 2 Press and release the Program/LEARN button on your garage door opener. 3 Select a button to program. Press and release the button the specified number of times according to the chart on - Chamberlain KLIK1U | KLIK3U - Page 4
1 2 3 4 5 6 7 8 9 *NOTE: LiftMaster, Do-It, Master Mechanic, Raynor, True Value and Sears Craftsman are compatible with Chamberlain technology. **NOTE: Visit www.chamberlain.com/klik3 for Genie Intellicode II instructions. 4 Press the program button on the remote control to save. Program Button - Chamberlain KLIK1U | KLIK3U - Page 5
Test the remote control by pressing the button. If the garage door opener does not activate, repeat the programming steps or visit www.chamberlain.com/klik3 for additional instructions. BATTERY To prevent possible SERIOUS INJURY or DEATH: • NEVER allow small children near batteries. • If battery is - Chamberlain KLIK1U | KLIK3U - Page 6
Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE cause undesired operation. Need Help? Go to www.chamberlain.com/klik3 or call 1-800-442-1255 All trade - Chamberlain KLIK1U | KLIK3U - Page 7
MODELO KLIK3U MODELO KLIK3U-BL MODELO KLIK3U-PK CONTROL REMOTO UNIVERSAL El control remoto puede programarse para activar hasta dos productos, tales como abre-puertas de garaje, operador de portones u operador de puertas comerciales. Cada botón en el control remoto funciona independientemente del - Chamberlain KLIK1U | KLIK3U - Page 8
PASOS INICIALES Confirme si el producto para el que programará el control remoto posee un botón de programación o LEARN, o microselectores. El botón LEARN o de programación con MICROSELECTORES y otros datos pueden encontrarse en www.chamberlain.com/klik3. Botón LEARN o de programación O Interruptor - Chamberlain KLIK1U | KLIK3U - Page 9
PROGRAMACIÓN 1 Quitar la tapa. Oprima y mantenga oprimido el botón de programación hasta que se encienda el LED. LED Botón de programación Cubierta 2 Oprima y suelte el botón SMART/LEARN en el abre-puerta de garaje. 3 Elija el botón que será programado. Oprima y suelte el botón la cantidad de veces - Chamberlain KLIK1U | KLIK3U - Page 10
botón 1 2 3 4 5 6 7 8 9 *NOTA: LiftMaster, Do-It, Master Mechanic, Raynor, True Value y Sears Craftsman son compatibles con la tecnología Chamberlain. **NOTA: Para instrucciones para Genie Intellicode II, visitar www.chamberlain.com/klik3. 4 Pulse el botón de programación del control remoto para - Chamberlain KLIK1U | KLIK3U - Page 11
PRUEBA Pulse el botón para probar el control remoto. Si el abre-puerta no se activara, repetir los pasos de programación o conéctese a www.chamberlain.com/klik3 para ver otras instrucciones. BATERÍA ADVERTENCIA Para evitar una LESIÓN GRAVE O INCLUSO LA MUERTE: • NUNCA permita la presencia de niños - Chamberlain KLIK1U | KLIK3U - Page 12
perjudicial, y (2) este dispositivo debe poder recibir interferencia, incluso interferencia que pueda afectar su funcionamiento. ¿Necesita ayuda? Conéctese a www.chamberlain.com/klik3 o llame al 1-800-442-1255 Todos los nombres comerciales utilizados en este documento son marcas registradas de los
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
UNIVERSAL REMOTE CONTROL
The remote control can be programmed to
activate up to two products, such as a
garage door opener, gate operator, or
commercial door operator. Each button on
the remote control works independently of the other and
must be programmed separately. The images throughout this
manual are for reference only and your product may look
different.
MODEL KLIK3U
MODEL KLIK3U-BL
MODEL KLIK3U-PK
To prevent possible SERIOUS INJURY or DEATH from a
moving gate or door:
•
ALWAYS keep remote controls out of reach of
children. NEVER permit children to operate, or play
with remote control transmitters.
•
Activate gate or door ONLY when it can be seen
clearly, is properly adjusted and there are no
obstructions to door travel.
•
ALWAYS keep gate or door in sight until completely
closed. NEVER permit anyone to cross path of moving
gate or door.
Read instructions thoroughly BEFORE
beginning.
If using the Universal Remote
Control with residential door openers, the remote
control must be used only with door openers
manufactured after 1993 that utilize photoelectric
sensors. The photoelectric sensors are always located on or
near the bottom of the door track.
STOP