Alcatel OS-LS-6248 Getting Started

Alcatel OS-LS-6248 Manual

Get Alcatel OS-LS-6248 PDF manuals and user guides View all Alcatel OS-LS-6248 manuals
Add to My Manuals
Save this manual to your list of manuals

Alcatel OS-LS-6248 manual content summary:

  • Alcatel OS-LS-6248 | Getting Started - Page 1
    Part No. 060203-10, Rev. C January 2007 OmniStack® LS 6200 Series Getting Started Guide Installationsanleitung Downloaded from www.Manualslib.com manuals search engine www.alcatel.com
  • Alcatel OS-LS-6248 | Getting Started - Page 2
    helpful release notes, technical bulletins, and manuals. For more information on Alcatel's Service Programs, see our web page at www.ind.alcatel.com, call us at 1-800-995-2696, or email us at [email protected]. This Manual documents OmniStack® 6200 hardware and software. The functionality
  • Alcatel OS-LS-6248 | Getting Started - Page 3
    with the instructions in this guide, may cause OS-LS-6224P OS-LS-6248P OS-LS-6248 OS-LS-6224 Modelo: OS-LS-62BP-P OS-LS-62BP-P OS-LS-62BP-DC & OS-LS-62BP OS-LS-62BP-DC & OS-LS-62BP Marca comercial: 3Y Power Alcatel Accton & 3Y Power Accton & 3Y Power Downloaded from www.Manualslib.com manuals
  • Alcatel OS-LS-6248 | Getting Started - Page 4
    Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 5
    - Class A This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant
  • Alcatel OS-LS-6248 | Getting Started - Page 6
    -45 port. This may damage this device. Attention: Les raccordeurs ne sont pas utilisé pour le système téléphonique! vi Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 7
    before installing the switch: WARNING: Installation and removal of the unit must be carried out by qualified personnel only. vii Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 8
    la sécurité suivante avant d'installer le Switch: AVERTISSEMENT: L'installation et la dépose de ce groupe doivent être confiés à un viii Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 9
    des Switches die folgenden Sicherheitsanweisungen durchlesen: WARNUNG: Die Installation und der Ausbau des Geräts darf nur durch Fachpersonal ix Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 10
    HO3VVF3GO.75 (Mindestanforderung) sein und die Aufschrift oder tragen. Der Netzstecker muß die Norm CEE 7/7 erfüllen ("SCHUKO"). x Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 11
    : Warning: Warning: Warning: Caution: Caution: Caution: This product does not contain any serviceable user parts. Installation and removal of the unit must be carried out by qualified personnel only werden, wenn er eingeschaltet ist. xi Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 12
    of all reusable waste content. • Design of products to maximize recyclables at the end of the product's life span. xii Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 13
    . Purpose This guide details the hardware features of the OmniStack® 6200 switch, including Its physical and performance-related characteristics, and how to install the switch. Audience This guide functions of the switch: The OmniStack® 6200 User Guide Also, as part of the
  • Alcatel OS-LS-6248 | Getting Started - Page 14
    xiv Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 15
    Source Connecting the BPS to the Switch Installation Instructions in German Eine Site Auswählen Montage Connections Fiber Optic SFP Devices Connectivity Rules 1000BASE-T Cable Requirements Downloaded from www.Manualslib.com manuals search engine 1-5 1-5 1-6 1-6 1-6 1-6 1-7 1-8 1-10 1-11 1-11 1-12
  • Alcatel OS-LS-6248 | Getting Started - Page 16
    Collision Domain Cable Labeling and Connection Records Appendix A: Troubleshooting Diagnosing Switch Indicators Power and Cooling Problems Installation In-Band Access Appendix B: Cables Twisted-Pair 4-27 5-29 5-29 5-29 5-30 5-31 6-33 6-36 xvi Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 17
    Making Twisted-Pair Connections 3-21 Network Wiring Connections 3-22 Making LC Port Connections 3-23 RJ-45 Connector Pin Numbers 5-29 1 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 18
    Figures 2 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 19
    Cable Length 3-24 Maximum 1000BASE-LX Gigabit Ethernet Cable Length 3-24 Maximum Fast Ethernet Cable Distance 3-25 Maximum Ethernet Cable Distance 3-25 Troubleshooting Chart 4-27 10/100BASE-TX MDI and MDI-X Port Pinouts 5-30 1000BASE-T MDI and MDI-X Port Pinouts 5-30 3 Downloaded from www
  • Alcatel OS-LS-6248 | Getting Started - Page 20
    Tables 4 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 21
    RJ-45 ports and two 1000Base-T stacking ports • OS-LS-6248 - Ethernet based switch with 48 RJ-45 10/100Base-TX ports, two Gigabit combo uplink ports (with SFP or 10/100/1000Base-TX interfaces) and two ports full-duplex Gigabit stacking • OS-LS-6248P - Ethernet based switch with 48 RJ-45 10/100Base
  • Alcatel OS-LS-6248 | Getting Started - Page 22
    a detailed description of the switch's advanced features, refer to the User Guide. Description of Hardware Figure 1-1. Front Panel 10/100/1000BASE-T Ports There does not support auto-negotiation, the communication mode of that port can be configured manually. 1-6 Downloaded from www.Manualslib.com
  • Alcatel OS-LS-6248 | Getting Started - Page 23
    supports auto-negotiation of flow control, so the switch can automatically prevent port buffers from becoming saturated. On the LS-OS-6224U, there are two RJ-45 ports, which are shared with two of the SFP transceiver slots. SFP Slots On all devices except the LS-OS .com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 24
    disabled. Port has established a valid network connection, it is linked. Activity has been detected on the port. Device is a standalone. 1-8 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 25
    ). System initialization (Master unit). Stack normal operating state (Slave unit). System initialization (Slave unit), or system in arbitrating/ election state. 1-9 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 26
    by using the Unit push button perform the following procedures: To work in a stacking mode : 1. Reboot the Alcatel OS6200 switch. 2. Wait until the LED color turns to green. 3. Hold the Unit button until one of amber for backup or slave). 1-10 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 27
    switch in the event of failure of the internal power supply. The U24 device support three kind of BPS: • 100W - OS-LS-62BP-DC -OS LS-6200 modular DC backup power supply. Provides backup power to one non-PoE 1-8. Power Supply Receptacle Downloaded from www.Manualslib.com manuals search engine 1-11
  • Alcatel OS-LS-6248 | Getting Started - Page 28
    or full duplex) if this feature is supported by the attached device; otherwise the port can be configured manually. • Independent RJ-45 10/100BASE-T and "At-a-glance" LEDs for easy troubleshooting • Network management agent: • Manages switch in-band or out-of-band • Supports Telnet, SNMP/RMON and Web
  • Alcatel OS-LS-6248 | Getting Started - Page 29
    related or other) and electromagnetic fields from data based network wiring • Safe connections with no damaged cables, connectors or shields Downloaded from www.Manualslib.com manuals search engine 2-13
  • Alcatel OS-LS-6248 | Getting Started - Page 30
    brackets to the switch • Power Cord-either US, Continental Europe or UK • RS-232 console cable • Ethernet Cable Adapter • This Getting Started Guide • User Guide Optional Rack-Mounting Equipment If you plan to on the type of screws used) 2-14 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 31
    be mounted in a standard 19-inch equipment rack or on a desktop or shelf. Mounting instructions for each type of site follow. Rack Mounting Before rack mounting the switch, pay particular attention . Figure 2-2. Attaching the Brackets Downloaded from www.Manualslib.com manuals search engine 2-15
  • Alcatel OS-LS-6248 | Getting Started - Page 32
    . Figure 2-4. Attaching the Adhesive Feet 2. Set the device on a flat surface near an AC power source, making sure there 2-16 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 33
    a device to a power source: 1. Insert the power cable plug directly into the receptacle located at the back of the device. Downloaded from www.Manualslib.com manuals search engine 2-17
  • Alcatel OS-LS-6248 | Getting Started - Page 34
    correctly plugged in. 3. Connect the 12V feeding cable to the BPS and to the switch. Installation Instructions in German Eine Site Auswählen Die Schalter können in ein Standard-19-Zoll-Ausrüstungsgestell oder einer Netzsteckdose befinden; 2-18 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 35
    2 Installation Instructions in German • Imstande sein, eine Temperatur zwischen 0 und 45 °C (32 und 113 °FF) und eine Feuchtigkeit innerhalb von 5% bis 95% über zu "Verbinden mit einer Stromquelle" auf Seite 3-5 am Ende dieses Kapitels. Downloaded from www.Manualslib.com manuals search engine 2-19
  • Alcatel OS-LS-6248 | Getting Started - Page 36
    2 Installing the Switch 4. Wenn Sie mehrere Switches installieren möchten, dann montieren Sie sie untereinander in einer beliebigen Reihenfolge. 2-20 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 37
    4 or 5 for 10BASE-T connections. Cabling Guidelines The RJ-45 ports on the switch support automatic MDI/MDI-X pinout configuration, so you can use standard straight-through twisted-pair cables Figure 3-1. Making Twisted-Pair Connections Downloaded from www.Manualslib.com manuals search engine 3-21
  • Alcatel OS-LS-6248 | Getting Started - Page 38
    unless it is actually required to solve a problem. Otherwise back pressure jamming signals may degrade is actually part of the patch panel. Instructions for making connections in the wiring closet with troubleshooting. Figure 3-2. Network Wiring Connections 3-22 Downloaded from www.Manualslib.com
  • Alcatel OS-LS-6248 | Getting Started - Page 39
    Gigabit speed will depend on the fiber type as listed under "1000 Mbps Gigabit Ethernet Collision Domain" on page 3-24. Downloaded from www.Manualslib.com manuals search engine 3-23
  • Alcatel OS-LS-6248 | Getting Started - Page 40
    3 Making Network Connections Connectivity Rules When adding hubs (repeaters) to your network, please follow the connectivity rules listed in the manuals for these products. However, note that because switches break up the path for connected devices into separate collision domains, you should not
  • Alcatel OS-LS-6248 | Getting Started - Page 41
    Cable Distance Cable Type Maximum Length Connector Twisted Pair, Categories 3, 4, 5 or better 100-ohm UTP 100 m (328 ft) RJ-45 Downloaded from www.Manualslib.com manuals search engine 3-25
  • Alcatel OS-LS-6248 | Getting Started - Page 42
    devices to which it is connected. • Note the length of each cable and the maximum cable length supported by the switch ports. • For ease of understanding, use a location-based key when assigning prefixes at each equipment rack. 3-26 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 43
    LED is Off Diag LED is Red Table A-1. Troubleshooting Chart Troubleshooting Chart Action • Check connections between the switch, running prior to shutdown. If you still cannot isolate the problem, then the internal power supply may be defective. Installation Verify com manuals search engine A-27
  • Alcatel OS-LS-6248 | Getting Started - Page 44
    A Troubleshooting subnet mask, and default gateway. If you have trouble establishing a link to the management agent, check to see if you have a valid network connection. Then verify connection will not be able to log into the system. A-28 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 45
    connection does not exceed 100 meters (328 feet). The RJ-45 ports on the switch base unit support automatic MDI/MDI-X operation, you can use straight-through cables for all network connections to PCs or -through or crossover cable. Downloaded from www.Manualslib.com manuals search engine B-29
  • Alcatel OS-LS-6248 | Getting Started - Page 46
    polarity of the wires that make up each wire pair. 1000BASE-T Pin Assignments All 1000BASE-T ports support automatic MDI/MDI-X operation, so you can use straight-through cables for all network connections to PCs (ELFEXT). These B-30 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 47
    test parameters for 1000BASE-T, there are basically three measures that can be applied to try and correct the problem: 1. Replace any Category 5 patch cables with high-performance Category 5e or Category 6 cables. 2. and safety codes. Downloaded from www.Manualslib.com manuals search engine B-31
  • Alcatel OS-LS-6248 | Getting Started - Page 48
    B Cables B-32 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 49
    ports OS-LS-6248 - Ethernet based switch with 48 RJ-45 10/100Base-TX ports, two Gigabit combo uplink ports (with SFP or 10/100/1000Base-TX interfaces) and two ports full-duplex Gigabit stacking OS-LS-6248P - ), BPS (Backup Power Supply) C-33 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 50
    OS-LS-6212 - 3.0 Kg OS-LS-6224 - 3.0 Kg OS-LS-6224U - 3.5 Kg OS-LS-6248 - 4.1Kg PoE Devices OS-LS-6212P - 3.5 Kg OS-LS-6224P - 4.5Kg OS-LS-6248P - 5.5Kg DC Devices OS-LS-6224-DC - 3.0 Kg OS-LS-6248 -DC - 4.1Kg Size Non PoE Devices OS-LS-6212 - 440mm x 230mm x 44mm (17.37" x 9.06" x 1.73") OS-LS
  • Alcatel OS-LS-6248 | Getting Started - Page 51
    Device OS-LS-6212P - 135W 100-240VAC 12V/4.5A OS-LS-6224P - 225W 100-240VAC -50V/3.6A, 12V/4A OS-LS-6248P - 465W 100-240VAC 12V/7.5A,-50V/7.5A The maximum power supply for PoE devices is 345. Backup Power Supply OS-LS-62BP - 126W, 100-240VAC 2-1A. OS-LS-62BP-P - 510W, 100-240VAC 10 - 5A. OS-LS-62BP
  • Alcatel OS-LS-6248 | Getting Started - Page 52
    C Specifications C-36 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 53
    employed by Ethernet, Fast Ethernet, or Gigabit Ethernet. End Station A workstation, server, or other device that does not forward traffic. Downloaded from www.Manualslib.com manuals search engine Glossary-37
  • Alcatel OS-LS-6248 | Getting Started - Page 54
    /CD access method and physical layer specifications for 1000BASE Gigabit Ethernet. LAN Segment Separate LAN or collision domain. Glossary-38 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 55
    device or network condition. Local Area Network (LAN) A group of interconnected computer and support devices. Media Access Control (MAC) A portion of the networking protocol that governs access to though located on the same LAN. Downloaded from www.Manualslib.com manuals search engine Glossary-39
  • Alcatel OS-LS-6248 | Getting Started - Page 56
    Glossary Glossary-40 Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 57
    100 Mbps 3-24, 3-25 1000 Mbps 3-24 contents of package 2-14 cooling problems 4-27 cord sets, international 2-18 D DC input 1-11 desktop mounting 2-16 Downloaded from www.Manualslib.com manuals search engine device connections 3-21 E electrical interference, avoiding 2-13 equipment checklist 2-14
  • Alcatel OS-LS-6248 | Getting Started - Page 58
    compliance 6-36 status LEDs 1-8 surge suppressor, using 2-13 switch architecture 1-6 T Telnet 4-28 temperature within a rack 2-15 troubleshooting in-band access 4-27 power and cooling problems 4-27 twisted-pair connections 3-21 W Web-based management 1-6 Index-42 Downloaded from www.Manualslib.com
  • Alcatel OS-LS-6248 | Getting Started - Page 59
    Downloaded from www.Manualslib.com manuals search engine
  • Alcatel OS-LS-6248 | Getting Started - Page 60
    Downloaded from www.Manualslib.com manuals search engine 060190-10
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Part No. 060203-10, Rev. C
January 2007
OmniStack® LS 6200 Series
Getting Started Guide
Installationsanleitung
www.alcatel.com
Downloaded from
www.Manualslib.com
manuals search engine